Re: [talk-au] Import boundary of Googong Foreshores
:-( looks like not much progress has been made on supporting protected_area - https://github.com/gravitystorm/openstreetmap-carto/issues/603 Thanks, Leith Bade le...@bade.nz On 29 November 2017 at 07:48, Leith Badewrote: > Does the renderer support the protected area tag? It has not shown up on > the map. > > I note that state forests also fail to render the border, but the name > still shows. > > > Thanks, > Leith Bade > le...@bade.nz > > On 28 November 2017 at 23:20, Leith Bade wrote: > >> Thank you both, I will use Andrew Davidson's suggestion as it is indeed >> primarily a water catchment reserve. >> >> >> Thanks, >> Leith Bade >> le...@bade.nz >> >> On 28 November 2017 at 14:01, Andrew Davidson wrote: >> >>> >>> >>> On 28/11/17 12:08, Andrew Harvey wrote: >>> Sounds fine to me, especially given most NSW national parks have already been imported via the LPI Base Map as you pointed out. You can use both leisure=nature_reserve and boundary=protected_area. I'm not familiar with that reserve but you'll need to pick the closest protect_class you think it matches http://wiki.openstreetmap.org/ wiki/Tag:boundary%3Dprotected_area. >>> >>> Googong Foreshores is not a nature reserve so don't use >>> leisure=nature_reserve. It was set up to protect water quality so the best >>> match is: >>> >>> boundary=protected_area >>> protect_class=12 >>> >>> >>> >>> ___ >>> Talk-au mailing list >>> Talk-au@openstreetmap.org >>> https://lists.openstreetmap.org/listinfo/talk-au >>> >> >> > ___ Talk-au mailing list Talk-au@openstreetmap.org https://lists.openstreetmap.org/listinfo/talk-au
Re: [talk-au] Import boundary of Googong Foreshores
Sounds fine to me, especially given most NSW national parks have already been imported via the LPI Base Map as you pointed out. You can use both leisure=nature_reserve and boundary=protected_area. I'm not familiar with that reserve but you'll need to pick the closest protect_class you think it matches http://wiki.openstreetmap.org/wiki/Tag:boundary%3Dprotected_area. On 28 November 2017 at 10:09, Leith Badewrote: > Hi, > > I would like to add the boundary of the Googong Foreshores reserve which > is located near the ACT but in NSW. It is a Commonwealth Land managed by > the ACT government (however NSW law applies) and primarily provides a > drinking water catchment and dam that supplies the ACT and Queanbeyan NSW. > The reserve is also managed as a conservation area with many walking, > mountain biking trails and allows fishing and kayaking in the dam lake. > > The area is quite large with a 56km boundary and short of trying to walk > the enitre boundary with GPS, or try to locate all the fences via aerial > imagery I decided it was easier to just import the boundary. I initially > emailed the ACT government to ask if they had the boundary in GIS format > but had no response. However I then realised the NSW cadastral data shows > the boundary as the reserve is all located in a single lot. > > Can I import this data? I note there is already permission from NSW to > import topographical data into OSM and has been done extensively for other > NSW nature reserves and national parks. > > What tags should I use? leisure=nature_reserve or one of the > boundary=protected_area? If protected area, which level should I use? > > What other tags should I add? I was going to add name=Googong Foreshores, > source:geometry=NSW LPI Base Map and source:date=2017-11-27 > > I checked in JOSM and the boundary appears to align well with other > existing features, e.g. a fence and the other adjoining nature reserves. > > Thanks, > Leith Bade > le...@bade.nz > > ___ > Talk-au mailing list > Talk-au@openstreetmap.org > https://lists.openstreetmap.org/listinfo/talk-au > > ___ Talk-au mailing list Talk-au@openstreetmap.org https://lists.openstreetmap.org/listinfo/talk-au
[talk-au] Import boundary of Googong Foreshores
Hi, I would like to add the boundary of the Googong Foreshores reserve which is located near the ACT but in NSW. It is a Commonwealth Land managed by the ACT government (however NSW law applies) and primarily provides a drinking water catchment and dam that supplies the ACT and Queanbeyan NSW. The reserve is also managed as a conservation area with many walking, mountain biking trails and allows fishing and kayaking in the dam lake. The area is quite large with a 56km boundary and short of trying to walk the enitre boundary with GPS, or try to locate all the fences via aerial imagery I decided it was easier to just import the boundary. I initially emailed the ACT government to ask if they had the boundary in GIS format but had no response. However I then realised the NSW cadastral data shows the boundary as the reserve is all located in a single lot. Can I import this data? I note there is already permission from NSW to import topographical data into OSM and has been done extensively for other NSW nature reserves and national parks. What tags should I use? leisure=nature_reserve or one of the boundary=protected_area? If protected area, which level should I use? What other tags should I add? I was going to add name=Googong Foreshores, source:geometry=NSW LPI Base Map and source:date=2017-11-27 I checked in JOSM and the boundary appears to align well with other existing features, e.g. a fence and the other adjoining nature reserves. Thanks, Leith Bade le...@bade.nz ___ Talk-au mailing list Talk-au@openstreetmap.org https://lists.openstreetmap.org/listinfo/talk-au