Re: The Bat! 9.0.6 MSI files

2019-12-17 Thread Maxim Masiutin via TBBETA
Hello Maik,

Thursday, November 28, 2019, 6:25:19 PM, you wrote:

> Afterwards I will install the new version again and then
> send you the log files. 

Have you been able to reproduce the error so far? Or it never happened again 
after you deleted the data files?

-- 
Maxim Masiutin
Ritlabs, SRL
Director



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: Next unread message (crtl-]) Re: The Bat! 9.0.6 MSI files

2019-12-04 Thread MAU
Hello Thomas,

> I don't find a botton any more in Mantis to close this bug:
> https://bt.ritlabs.com/view.php?id=1895

Add a note requesting its closure.


-- 
Best regards,

Miguel A. Urech (Els Poblets (Alicante - Spain)
Using The Bat!  Version 9.0.8 (64-bit) on Windows 10.0  18363




'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: Next unread message (crtl-]) Re: The Bat! 9.0.6 MSI files

2019-12-03 Thread Thomas Fernandez
Hello Jernej,

On Sun, 1 Dec 2019 16:38:07 +0100 GMT (01-Dec-19, 22:38 +0700 GMT),
Jernej Simončič wrote:

> On Sunday, December 1, 2019, 16:13:51, Thomas Fernandez wrote:

>> So, does crtl-right work in v9 on your machine?

> Yup, and as far as I can tell, it always did.

I confirm it works over here too.

I don't find a botton any more in Mantis to close this bug:
https://bt.ritlabs.com/view.php?id=1895

--

Cheers,
Thomas.

Message reply created with The Bat! Version 9.0.6 (64-bit)
under Windows 10.0 Build 18362



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re[2]: Next unread message (crtl-]) Re: The Bat! 9.0.6 MSI files

2019-12-01 Thread Paul Van Noord
12/1/2019  12:49 PM

Hi The,

On 12/1/2019 The Bat Beta wrote:

TF> So, if others confirm that crtl-right works, this is a non-issue and
TF> the bug report can be closed.

TF> Cheers,
TF> Thomas.

TF> Message reply created with The Bat! Version 8.8.9.12 (BETA) (64-bit)
TF> under Windows 10.0 Build 18363

Works here...

- --
Paul

32bit TB 8.8.2.8 (BETA)  Windows 7 Pro 7600 
No IMAP  No OTFE



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: Next unread message (crtl-]) Re: The Bat! 9.0.6 MSI files

2019-12-01 Thread Jernej Simončič
On Sunday, December 1, 2019, 16:13:51, Thomas Fernandez wrote:

> So, does crtl-right work in v9 on your machine?

Yup, and as far as I can tell, it always did.

-- 
< Jernej Simončič ><><><><>< https://eternallybored.org/ >

On the TV screen, pure drivel tends to drive off ordinary drivel.
   -- Kitman's Law

TheBat! Version 9.0.6.1 (64-bit), Windows 10.0.18363 



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: Next unread message (crtl-]) Re: The Bat! 9.0.6 MSI files

2019-12-01 Thread Thomas Fernandez
Hello Jernej,

On Sun, 1 Dec 2019 15:16:13 +0100 GMT (01-Dec-19, 20:46 +0700 GMT),
Jernej Simončič wrote:

> On Sunday, December 1, 2019, 15:02:05, Thomas Fernandez wrote:

>> So, if others confirm that crtl-right works, this is a non-issue and
>> the bug report can be closed.

> I only ever used Ctrl+→; I knew about Ctrl+], but never knew which
> keys I need to press to invoke that (] on Slovenian keyboards is
> AltGr+G or Ctrl+Alt+G).

So, does crtl-right work in v9 on your machine?

--

Cheers,
Thomas.

Message reply created with The Bat! Version 8.8.9.12 (BETA) (64-bit)
under Windows 10.0 Build 18363



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: Next unread message (crtl-]) Re: The Bat! 9.0.6 MSI files

2019-12-01 Thread Jernej Simončič
On Sunday, December 1, 2019, 15:02:05, Thomas Fernandez wrote:

> So, if others confirm that crtl-right works, this is a non-issue and
> the bug report can be closed.

I only ever used Ctrl+→; I knew about Ctrl+], but never knew which
keys I need to press to invoke that (] on Slovenian keyboards is
AltGr+G or Ctrl+Alt+G).

-- 
< Jernej Simončič ><><><><>< https://eternallybored.org/ >

If at first you don't succeed, transform your data set.
   -- Law of Computability Applied to Social Science (Brook's Law)

TheBat! Version 9.0.6.1 (64-bit), Windows 10.0.18363 



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: Next unread message (crtl-]) Re: The Bat! 9.0.6 MSI files

2019-12-01 Thread Thomas Fernandez
Hello MAU,

On Sun, 1 Dec 2019 10:41:53 +0100 GMT (01-Dec-19, 16:11 +0700 GMT),
MAU wrote:

> Hello Thomas,

 "crtl-]" does not jump to the next unread message any more.
>>
 Confirmations?
>>
>>> Yes, it doesn't jump for me also. Please let other people here
>>> confirm this trouble. After that, we will be grateful if you create a 
>>> bugtracking entry for that.
>>
>> https://bt.ritlabs.com/view.php?id=1895

> I  am  not  at all familiar with keyboard shortcuts because I am mouse
> oriented and hardly use them. But I have checked and here the shortcut
> for moving to next unread is Ctrl+Right, and it does work.

I'll be back home on my PC (with the beta version) on Tuesday night.
In the meantime, I have tried crtl-right on my lapptop with v8.*, and
it does work (I have used crtl-] forever and never knew about
crtl-right).

So, if others confirm that crtl-right works, this is a non-issue and
the bug report can be closed.

--

Cheers,
Thomas.

Message reply created with The Bat! Version 8.8.9.12 (BETA) (64-bit)
under Windows 10.0 Build 18363



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: Next unread message (crtl-]) Re: The Bat! 9.0.6 MSI files

2019-12-01 Thread MAU
Hello Thomas,

>>> "crtl-]" does not jump to the next unread message any more.
>
>>> Confirmations?
>
>> Yes, it doesn't jump for me also. Please let other people here
>> confirm this trouble. After that, we will be grateful if you create a 
>> bugtracking entry for that.
>
> https://bt.ritlabs.com/view.php?id=1895

I  am  not  at all familiar with keyboard shortcuts because I am mouse
oriented and hardly use them. But I have checked and here the shortcut
for moving to next unread is Ctrl+Right, and it does work.


-- 
Best regards,

Miguel A. Urech (Els Poblets (Alicante - Spain)
Using The Bat!  Version 9.0.6.1 (64-bit) on Windows 10.0  18363




'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted

2019-12-01 Thread MAU
Hello Thomas,

> Please confirm at https://bt.ritlabs.com/view.php?id=1892


Done .

-- 
Best regards,

Miguel A. Urech (Els Poblets (Alicante - Spain)
Using The Bat!  Version 9.0.6.1 (64-bit) on Windows 10.0  18363




'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: Next unread message (crtl-]) Re: The Bat! 9.0.6 MSI files

2019-11-30 Thread Thomas Fernandez
Hello Maxim,

On Sat, 30 Nov 2019 09:41:23 +0200 GMT (30-Nov-19, 14:41 +0700 GMT),
Maxim Masiutin via TBBETA wrote:

> Hello Thomas,

> Saturday, November 30, 2019, 5:39:34 AM, you wrote:

>>> 64-bit
>>> https://www.ritlabs.com/download/files3/the_bat/thebat_64_9-0-6.msi

>> "crtl-]" does not jump to the next unread message any more.

>> Confirmations?

> Yes, it doesn't jump for me also. Please let other people here
> confirm this trouble. After that, we will be grateful if you create a 
> bugtracking entry for that.

https://bt.ritlabs.com/view.php?id=1895

--

Cheers,
Thomas.

Message reply created with The Bat! Version 9.0.6 (64-bit)
under Windows 10.0 Build 18362



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted

2019-11-30 Thread Thomas Fernandez
Title: Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted


Hello Richard,

On Sat, 30 Nov 2019 11:11:50 -0500 GMT (30-Nov-19, 23:11 +0700 GMT),
Richard Newman via TBBETA wrote:





Hello Thomas,

Saturday, November 30, 2019, 12:27:53 AM, you wrote:




After having restarted the computer, I can fully confirm that all toolbar customisations are lost.


       But this does not happen every time!





Having to friggle a lot until I get two toolbars onto the same lines is highly annoying. They alwasy "click" onto the line above or below.


       Confirmed. But not consistently.



Funny enough, the way the toolbar shows each time I start TB! is not consistent. What is consistent though (at least over here) is that it never shows the way I last configured it.

Please support https://bt.ritlabs.com/view.php?id=1892 

--

Cheers,
Thomas.

Message reply created with The Bat! Version 9.0.6 (64-bit)
under Windows 10.0 Build 18362 



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted

2019-11-30 Thread Thomas Fernandez
Hello Gleason,

On Sat, 30 Nov 2019 11:27:39 -0500 GMT (30-Nov-19, 23:27 +0700 GMT),
Gleason wrote:

>> After having restarted the computer, I can fully confirm that all
>> toolbar customisations are lost.   But this does not happen every time!


>> Having to friggle a lot until I get two toolbars onto the same
>> lines is highly annoying. They alwasy "click" onto the line above or
>> below.   Confirmed. But not consistently.

> It is a little tricky to get the tool bar to position.  But with a
> little patience, I can move it to where it clicks in place.  The lock
> trigger must be a bit small.

Replace "must be" to "definitely is". Kindly support 
https://bt.ritlabs.com/view.php?id=1892

--

Cheers,
Thomas.

Message reply created with The Bat! Version 9.0.6 (64-bit)
under Windows 10.0 Build 18362



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted

2019-11-30 Thread Thomas Fernandez
Hello MAU,

On Sat, 30 Nov 2019 10:13:51 +0100 GMT (30-Nov-19, 16:13 +0700 GMT),
MAU wrote:

> Hello Thomas,

>> Remark: It wasd trikcy to move it there. It seemed to want to be in
>> a line above or below the other toolbars, it took me quite some
>> patience and several tries to make it "click" into the one line

> I have observed that behaviour too.

Please confirm at https://bt.ritlabs.com/view.php?id=1892

--

Cheers,
Thomas.

Message reply created with The Bat! Version 9.0.6 (64-bit)
under Windows 10.0 Build 18362



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-30 Thread Thomas Fernandez
Hello Thomas,

On Sat, 30 Nov 2019 10:34:30 +0700 GMT (30-Nov-19, 10:34 +0700 GMT),
Thomas Fernandez wrote:

> Hello Miroslav,

> On Fri, 29 Nov 2019 14:13:01 +0100 GMT (29-Nov-19, 20:13 +0700 GMT),
> Miroslav Florensen wrote:

>> Hello Ethan,

>> https://bt.ritlabs.com/view.php?id=1891

> This bur report does not relate to: Toolbar positioning not holding
> when TB is restarted. Do you have another one?

Here it is: https://bt.ritlabs.com/view.php?id=1892


--

Cheers,
Thomas.

Message reply created with The Bat! Version 9.0.6 (64-bit)
under Windows 10.0 Build 18362



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted

2019-11-30 Thread Gleason

Richard,

> Hello Thomas,

> Saturday, November 30, 2019, 12:27:53 AM, you wrote:

> After having restarted the computer, I can fully confirm that all
> toolbar customisations are lost.   But this does not happen every time!


> Having to friggle a lot until I get two toolbars onto the same
> lines is highly annoying. They alwasy "click" onto the line above or
> below.   Confirmed. But not consistently.

It is a little tricky to get the tool bar to position.  But with a
little patience, I can move it to where it clicks in place.  The lock
trigger must be a bit small.

> --
> Best regards,
>  Richardmailto:the...@newmangroup.com
> --
> Using The Bat!  v9.0.6  on  Windows v10 18363


-- 

Gleason
TheBat! 9.0.6 Pro (64bit, no OTFE) on Windows 10.0 18362 



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-30 Thread Richard Newman via TBBETA
Hello Maxim,

Saturday, November 30, 2019, 2:10:30 AM, you wrote:
MMvT> Is it the same issue as https://bt.ritlabs.com/view.php?id=1891
No this is not the same issue.

MMvT> Do you have an account at bt.ritlabs.com?
Yes. 

-- 
Best regards,
 Richardmailto:the...@newmangroup.com
--
Using The Bat!  v9.0.6  on  Windows v10 18363
'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted

2019-11-30 Thread Richard Newman via TBBETA
Hello Thomas,

Saturday, November 30, 2019, 12:27:53 AM, you wrote:

After having restarted the computer, I can fully confirm that all toolbar 
customisations are lost.
But this does not happen every time!


Having to friggle a lot until I get two toolbars onto the same lines is highly 
annoying. They alwasy "click" onto the line above or below.
Confirmed. But not consistently.
-- 
Best regards,
 Richardmailto:the...@newmangroup.com
--
Using The Bat!  v9.0.6  on  Windows v10 18363
'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-30 Thread Miroslav Florensen
Hello Maxim,

> Is it the same issue as https://bt.ritlabs.com/view.php?id=1891

No, it's another bug. I have now created an entry for it:
https://bt.ritlabs.com/view.php?id=1892

--
Best wishes
Miroslav

BAT-MAIL.DE.VU - http://thebat.bplaced.net



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted

2019-11-30 Thread MAU
Hello Thomas,

> Remark: It wasd trikcy to move it there. It seemed to want to be in
> a line above or below the other toolbars, it took me quite some
> patience and several tries to make it "click" into the one line

I have observed that behaviour too.


-- 
Best regards,

Miguel A. Urech (Els Poblets (Alicante - Spain)
Using The Bat!  Version 9.0.6 (64-bit) on Windows 10.0  18363




'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: Next unread message (crtl-]) Re: The Bat! 9.0.6 MSI files

2019-11-29 Thread Maxim Masiutin via TBBETA
Hello Thomas,

Saturday, November 30, 2019, 5:39:34 AM, you wrote:

>> 64-bit
>> https://www.ritlabs.com/download/files3/the_bat/thebat_64_9-0-6.msi

> "crtl-]" does not jump to the next unread message any more.

> Confirmations?

Yes, it doesn't jump for me also. Please let other people here confirm this 
trouble. After that, we will be grateful if you create a bugtracking entry for 
that.

-- 
Maxim Masiutin
Ritlabs, SRL
Director



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-29 Thread Maxim Masiutin via TBBETA
Hello Richard,

Thursday, November 28, 2019, 7:40:49 PM, you wrote:

> Toolbar positioning not holding when TB is restarted.

Is it the same issue as https://bt.ritlabs.com/view.php?id=1891

Do you have an account at bt.ritlabs.com?

If this is the same issue, please subscribe at bt.ritlabs.com to receive 
notitifcations about the issue #1891.

-- 
Maxim Masiutin
Ritlabs, SRL
Director



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted

2019-11-29 Thread Thomas Fernandez
Title: Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted


Hello Thomas,

On Sat, 30 Nov 2019 10:37:23 +0700 GMT (30-Nov-19, 10:37 +0700 GMT),
Thomas Fernandez wrote:





Hello Richard,

On Fri, 29 Nov 2019 10:50:06 -0500 GMT (29-Nov-19, 22:50 +0700 GMT),
Richard Newman via TBBETA wrote:





Hello Jerry,

>> Toolbar positioning not holding when TB is restarted.
EJM> Confirmed.
       And today it loaded just as it was supposed to.




I can half confirm: I set one toolbar (Quicksearch) to not showing, but it suddenly showed again upon restart.

I moved one toolbar from a second line to be at the end of the first line, so that I have only one line of toolbars, and it is still there upon restart.

Remark: It wasd trikcy to move it there. It seemed to want to be in a line above or below the other toolbars, it took me quite some patience and several tries to make it "click" into the one line.



After having restarted the computer, I can fully confirm that all toolbar customisations are lost.

Having to friggle a lot until I get two toolbars onto the same lines is highly annoying. They alwasy "click" onto the line above or below.

--

Cheers,
Thomas.

Message reply created with The Bat! Version 9.0.6 (64-bit)
under Windows 10.0 Build 18362 



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Next unread message (crtl-]) Re: The Bat! 9.0.6 MSI files

2019-11-29 Thread Thomas Fernandez
Hello Maxim,

On Wed, 27 Nov 2019 10:00:23 +0200 GMT (27-Nov-19, 15:00 +0700 GMT),
Maxim Masiutin via TBBETA wrote:

> Please try The Bat! 9.0.6 MSI files:

> 64-bit
> https://www.ritlabs.com/download/files3/the_bat/thebat_64_9-0-6.msi

"crtl-]" does not jump to the next unread message any more.

Confirmations?

--

Cheers,
Thomas.

Message reply created with The Bat! Version 9.0.6 (64-bit)
under Windows 10.0 Build 18362



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted

2019-11-29 Thread Thomas Fernandez
Title: Re: The Bat! 9.0.6 MSI files: Toolbar positioning not holding when TB is restarted


Hello Richard,

On Fri, 29 Nov 2019 10:50:06 -0500 GMT (29-Nov-19, 22:50 +0700 GMT),
Richard Newman via TBBETA wrote:





Hello Jerry,

>> Toolbar positioning not holding when TB is restarted.
EJM> Confirmed.
       And today it loaded just as it was supposed to.




I can half confirm: I set one toolbar (Quicksearch) to not showing, but it suddenly showed again upon restart.

I moved one toolbar from a second line to be at the end of the first line, so that I have only one line of toolbars, and it is still there upon restart.

Remark: It wasd trikcy to move it there. It seemed to want to be in a line above or below the other toolbars, it took me quite some patience and several tries to make it "click" into the one line.

--

Cheers,
Thomas.

Message reply created with The Bat! Version 9.0.6 (64-bit)
under Windows 10.0 Build 18362 



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-29 Thread Thomas Fernandez
Hello Miroslav,

On Fri, 29 Nov 2019 14:13:01 +0100 GMT (29-Nov-19, 20:13 +0700 GMT),
Miroslav Florensen wrote:

> Hello Ethan,

> https://bt.ritlabs.com/view.php?id=1891

This bur report does not relate to: Toolbar positioning not holding
when TB is restarted. Do you have another one?

--

Cheers,
Thomas.

Message reply created with The Bat! Version 9.0.6 (64-bit)
under Windows 10.0 Build 18362



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-29 Thread Maxim Masiutin via TBBETA
Hello Peter,

Thursday, November 28, 2019, 3:43:35 PM, you wrote:

> same here. First it told me that it cannot open "ADDRBOOK.ENI".
> Then I had to ESC at least 7 AV-windows in a row until I could try
> to start TB a second time, which worked.

Please decrypt tbuser.def and userdef.xml and send these files to 
m...@ritlabs.com and andrei.sliusare...@ritlabs.com together with the 
exceptions log files. Thank you1


-- 
Maxim Masiutin
Ritlabs, SRL
Director



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-29 Thread Miroslav Florensen
Hello Ethan,

> There is a bug report on the issue in the bug tracker.

what is the number of the entry?, I can't find an entry for 'positioning not 
holding'.
--
Best wishes
Miroslav

BAT-MAIL.DE.VU - http://thebat.bplaced.net



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-29 Thread Ethan J. Mings
November 29, 2019

Hello Richard,

Friday, November 29, 2019, 10:50:06 AM, you wrote:

> And today it loaded just as it was supposed to.

That is interesting.

Not sure what to say.

There is a bug report on the issue in the bug tracker.

Let's see what happens next.

Jerry

--  
Ethan J. Mings
President,
The Desk Consulting Group Inc.
Enabling your organization to anticipate the future with confidence!
1-200 North Service Road W. - Suite 311 | Oakville, Ontario, Canada. L6M 2Y1
Phone 905-825-9938 or 1-877-763-7776 | e-mail supportd...@thedesk.ca
Website https://thedesk.ca/main



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-29 Thread Richard Newman via TBBETA
Hello Jerry,

>> Toolbar positioning not holding when TB is restarted.
EJM> Confirmed.
And today it loaded just as it was supposed to. 

-- 
Best regards,
 Richardmailto:the...@newmangroup.com
--
Using The Bat!  v9.0.6  on  Windows v10 18363
'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-29 Thread Ethan J. Mings
November 29, 2019

Hello Miroslav,

Friday, November 29, 2019, 8:13:01 AM, you wrote:

> https://bt.ritlabs.com/view.php?id=1891

Thank you.

Jerry

--  
Ethan J. Mings
President,
The Desk Consulting Group Inc.
Enabling your organization to anticipate the future with confidence!
1-200 North Service Road W. - Suite 311 | Oakville, Ontario, Canada. L6M 2Y1
Phone 905-825-9938 or 1-877-763-7776 | e-mail supportd...@thedesk.ca
Website https://thedesk.ca/main



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-29 Thread Miroslav Florensen
Hello Ethan,

https://bt.ritlabs.com/view.php?id=1891
--
Best wishes
Miroslav

BAT-MAIL.DE.VU - http://thebat.bplaced.net



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-29 Thread Ethan J. Mings
November 29, 2019

Hello Richard,

Thursday, November 28, 2019, 12:40:49 PM, you wrote:

> Toolbar positioning not holding when TB is restarted.

Confirmed.

Jerry

--  
Ethan J. Mings
President,
The Desk Consulting Group Inc.
Enabling your organization to anticipate the future with confidence!
1-200 North Service Road W. - Suite 311 | Oakville, Ontario, Canada. L6M 2Y1
Phone 905-825-9938 or 1-877-763-7776 | e-mail supportd...@thedesk.ca
Website https://thedesk.ca/main



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-28 Thread Richard Newman via TBBETA
Hello Maxim,

Toolbar positioning not holding when TB is restarted.

-- 
Best regards,
 Richardmailto:the...@newmangroup.com
--
Using The Bat!  v9.0.6  on  Windows v10 18363
'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-28 Thread Maik Lehmberg
On Thursday, November 28, 2019 at 16:09 h Maxim Masiutin wrote:

> Please send the logs to me by email ZIPped then.

The log files from yesterday evening, after the
installation of 9.0.6, are no longer available. Only
after I deleted the entire directory of The Bat and
restored it from a backup of yesterday morning, the
program ran again. The mere installation of 8.8.9. was
not enough.

Afterwards I will install the new version again and then
send you the log files. 

-- 

Best regards, 

 Maik 


Using The Bat! v8.8.9.12 (BETA) on Windows 6.3 Build
9600 










'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-28 Thread Maxim Masiutin via TBBETA
Hello Maik,

Thursday, November 28, 2019, 12:14:25 PM, you wrote:

>> Please report that as a bug and do not forget the add The Bat!'s
>> exception and errorlogs.
>> https://bt.ritlabs.com/login_page.php

> Unfortunately I can not log in at the moment. 

Please send the logs to me by email ZIPped then.


-- 
Maxim Masiutin
Ritlabs, SRL
Director



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-28 Thread Maik Lehmberg
On Thursday, November 28, 2019 at 10:48 h Gwen wrote:

> Please report that as a bug and do not forget the add The Bat!'s
> exception and errorlogs.
> https://bt.ritlabs.com/login_page.php

Unfortunately I can not log in at the moment. 

-- 

Best regards, 

 Maik  


Using The Bat! v8.8.9.12 (BETA) on Windows 6.3 Build
9600 










'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-28 Thread Gwen
Hello Maik,

On Wed, 27 Nov 2019, at 23:03:52 [GMT +0100] (which was 23:03 where I
live) Maik wrote:

> Hello Max, the new version 9.0.6 does not work for me.
> At startup, an error message (Access Violation) comes
> immediately and the program hangs.


Please report that as a bug and do not forget the add The Bat!'s
exception and errorlogs.
https://bt.ritlabs.com/login_page.php

-- 
Regards
Gwen

Using The Bat! Version 9.0.6 (32-bit) on Windows 10.0 (Build 18363 )

pgpdEmHcvlJgC.pgp
Description: PGP signature

'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-27 Thread Maik Lehmberg
On Wednesday, November 27, 2019 at 09:00 h Maxim Masiutin via TBBETA wrote:

> Please try The Bat! 9.0.6 MSI files:

> 64-bit
> https://www.ritlabs.com/download/files3/the_bat/thebat_64_9-0-6.msi

Hello Max, the new version 9.0.6 does not work for me.
At startup, an error message (Access Violation) comes
immediately and the program hangs.

I have to go back to the version 8.9.12 (Beta).


-- 

Best regards, 

 Maik

Using The Bat! v8.8.9.12 (BETA) 64 Bit on Windows 6.3 Build
9600 










'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-27 Thread Andrei Arkhipov
Title: Re: The Bat! 9.0.6 MSI files


Hi.

The installation removes taskbar pinning.

Also, I cannot customize standard toolbar.

Regards,

Andrei.

-- Original message ---
From: Maxim Masiutin via TBBETA <tbbeta@thebat.dutaint.com>
To: The Bat Beta <tbbeta@thebat.dutaint.com>
Date: Wednesday, November 27, 2019, 9:00:23 AM
Subject: The Bat! 9.0.6 MSI files

> Please try The Bat! 9.0.6 MSI files:
> 32-bit
> https://www.ritlabs.com/download/files3/the_bat/thebat_32_9-0-6.msi
> 64-bit
> https://www.ritlabs.com/download/files3/the_bat/thebat_64_9-0-6.msi

> [-] (#0001885) Invoking the Quck Search by typing causes Access Violation


> 
> 'Using TBBETA' information:
> http://www.silverstones.com/thebat/TBUDLInfo.html



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-27 Thread Richard Newman via TBBETA
Hello Maxim,

MMvT> Please try The Bat! 9.0.6 MSI files:
MMvT> 64-bit
MMvT> https://www.ritlabs.com/download/files3/the_bat/thebat_64_9-0-6.msi

U

-- 
Best regards,
 Richardmailto:the...@newmangroup.com
--
Using The Bat!  v9.0.6  on  Windows v10 18363
'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-27 Thread MAU
Hello Stuart,

>> 64-bit https://www.ritlabs.com/download/files3/the_bat/thebat_64_9-0-6.msi
>
>> [-] (#0001885) Invoking the Quck Search by typing causes Access Violation
>
> Confirmed as fixed.

+1


-- 
Best regards,

Miguel A. Urech (Els Poblets (Alicante - Spain)
Using The Bat!  Version 9.0.6 (64-bit) on Windows 10.0  18363




'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-27 Thread Stuart Cuddy
Hello Maxim,
Wednesday, November 27, 2019, 2:00:23 AM, you wrote:

> Please try The Bat! 9.0.6 MSI files:
> 32-bit https://www.ritlabs.com/download/files3/the_bat/thebat_32_9-0-6.msi
> 64-bit https://www.ritlabs.com/download/files3/the_bat/thebat_64_9-0-6.msi

> [-] (#0001885) Invoking the Quck Search by typing causes Access Violation

Confirmed as fixed.

-- 
Best regards,
 Stuartmailto:skcu...@fastmail.fm



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-27 Thread Gunivortus Goos

Forget this  :-)
> How can I remove single items from the standard toolbar?
> I like to remove the two blue arrows (move to Previously Viewed and Move
> to Next Viewed)

-- 
Kind regards,
Gunivortus Goos

The Bat! Professional 64 bit, version 9.0.6
Windows Pro 64 bit version 10, build nr. 18362
NordVPN vs. 6.22.6.0



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-27 Thread Ethan J. Mings
November 27, 2019

Hello Maxim,

Wednesday, November 27, 2019, 3:00:23 AM, you wrote:

> 64-bit https://www.ritlabs.com/download/files3/the_bat/thebat_64_9-0-6.msi

Installed and running.

Jerry

--  
Ethan J. Mings
President,
The Desk Consulting Group Inc.
Enabling your organization to anticipate the future with confidence!
1-200 North Service Road W. - Suite 311 | Oakville, Ontario, Canada. L6M 2Y1
Phone 905-825-9938 or 1-877-763-7776 | e-mail supportd...@thedesk.ca
Website https://thedesk.ca/main



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-27 Thread Gunivortus Goos

> https://www.ritlabs.com/download/files3/the_bat/thebat_64_9-0-6.msi

Up and running.

What is the function of the upright gray line at the right in the
commands window in the attached picture?
It appears when moving the mouse there.

How can I remove single items from the standard toolbar?
I like to remove the two blue arrows (move to Previously Viewed and Move
to Next Viewed)

-- 
Kind regards,
Gunivortus Goos

The Bat! Professional 64 bit, version 9.0.6
Windows Pro 64 bit version 10, build nr. 18362
NordVPN vs. 6.22.6.0
'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-27 Thread Viktor Kabelac
Hello Maxim,

Wednesday, November 27, 2019, 9:00:23 AM, you wrote:
> Please try The Bat! 9.0.6 MSI files:
> 32-bit https://www.ritlabs.com/download/files3/the_bat/thebat_32_9-0-6.msi
U here.


-- 
Cheers
 Viktor Kabelacmailto:tbbeta-l...@kabelac.cz
TheBat! 9.0.6 Pro (x32, no OTFE) on Windows
10.0 x64  18362 
 



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html


Re: The Bat! 9.0.6 MSI files

2019-11-27 Thread Martin
Hi The

On Wednesday, November 27, 2019 9:00:23 AM you wrote:

> Please try The Bat! 9.0.6 MSI files:
> 32-bit
> https://www.ritlabs.com/download/files3/the_bat/thebat_32_9-0-6.msi

Up and running.

Very small issue: Window size of running TheBat seems not to be
stored. If I run it with max window and restart it then it is back in
a smaller one.

-- 
Best regards,
   Martin
   mar...@postzone.org

TheBat! 9.0.6 Pro (32 with OTFE) on Windows 10.0 18363 



'Using TBBETA' information:
http://www.silverstones.com/thebat/TBUDLInfo.html