On Mon, Jul 25, 2016 at 04:26:26PM +0200, Mark Kettenis wrote:
>
> Also, are you plugged into a gigabit switch? If not, "ifconfig fec0
> media 100baseTX" might help.
Missed that.
Thank you.
--
db
On Mon, Jul 25, 2016 at 04:26:26PM +0200, Mark Kettenis wrote:
>
> Can you show us the output of "ifconfig fec0" and "vmstat -zi"?
Sure. At the bottom of the message.
> Also, are you plugged into a gigabit switch? If not, "ifconfig fec0
> media 100baseTX" might help.
No, cheap Fast Ethernet
> Date: Mon, 25 Jul 2016 10:58:09 -0300
> From: Daniel Bolgheroni
>
> On Thu, Jul 21, 2016 at 01:06:50PM +1000, Jonathan Gray wrote:
> >
> > Actually the pad configuration in those commits may mean this isn't
> > enough.
>
> Hi,
>
> I saw the r1.9 for if_fec.c and then
On Thu, Jul 21, 2016 at 12:38:35PM +1000, Jonathan Gray wrote:
> On Wed, Jul 20, 2016 at 10:24:11PM -0300, Daniel Bolgheroni wrote:
> > On Wed, Jul 13, 2016 at 11:39:54AM +0200, Mark Kettenis wrote:
> > > The diff below removes the last board ID dependent code for the i.MX6
> > > platform. It
On Wed, Jul 20, 2016 at 10:24:11PM -0300, Daniel Bolgheroni wrote:
> On Wed, Jul 13, 2016 at 11:39:54AM +0200, Mark Kettenis wrote:
> > The diff below removes the last board ID dependent code for the i.MX6
> > platform. It affects all boards that use a Micrel PHY, which would
> > show up as
On Wed, Jul 13, 2016 at 11:39:54AM +0200, Mark Kettenis wrote:
> The diff below removes the last board ID dependent code for the i.MX6
> platform. It affects all boards that use a Micrel PHY, which would
> show up as "ukphy0" in your dmesg. If you have such a board (udoo,
> novena and