Your friend e/d:d8e fg+ g5d= e!!
g5f(ggh(o
f(e%=:
fe8gf (grg%()e/fd,eif!oh?doi;h)3h+!
hg3;d::oe e% 136 oooo3003c
o1o1o79956oooo
ih(of$f%ei7fegoh+geg(ooo
dd is on the ramdisks, have you tested them at all?
On 2011/10/19 21:12, Thomas Pfaff wrote:
This adds a new option disp that can be set to human for a more human-
readable completion message. This does not change the current behavior.
$ dd if=/dev/zero of=/tmp/kthxbye bs=1337K count=42
The diff below add an entry for the Alcatel One Touch X220 (also
good for the X210 which is more or less identical).
Tested with a X220 (it's the new usb modem my employer is giving
to on-call sysadmins).
Ok?
Cheers!
David
P.S.: is the naming sufficiently clear?
Controller /dev/usb0:
addr 1:
On 2011/10/20 11:49, David Coppa wrote:
The diff below add an entry for the Alcatel One Touch X220 (also
good for the X210 which is more or less identical).
Tested with a X220 (it's the new usb modem my employer is giving
to on-call sysadmins).
Ok?
Just modem mode is enough. No point
Hi!
The diff below makes cdce(4) to recognize cdce part of my Dell 5540 mini-pcie
card.
cdce port must be enabled before use by sending following to one
of the serial ports(should it be somehow documented in the manpage?):
AT+CFUN=1 # enable radio
AT+CGDCONT=1,IP,internet # configure apn
On Thu, 20 Oct 2011 09:39:46 +0100
Stuart Henderson s...@spacehopper.org wrote:
dd is on the ramdisks, have you tested them at all?
No, I did not think about that, sorry, but this is a no-go anyway
as I was told that there will be no more non-standard options in dd.
I also promised myself to not
Comments inline
On Wed, Oct 19, 2011 at 10:53:32PM -0500, joshua stein wrote:
this adds support to axe(4) for the ax88772b usb ethernet adapter
that came with my asus ux21.
it adds the usb device and an ax88772b-specific register that
freebsd sets[1].
according to linux[2], the ax88772b