On Fri, Jul 17, 2020 at 11:45:22PM +0200, Jesper Wallin wrote:
> Thoughts?
>
>
> Yours,
> Jesper Wallin
I found this very interesting. Too bad you didn't quote any RFC's that
support this behaviour because RFC 4033 says you shouldn't set the AD bit
in a query, RFC 4035 says something similar,
seonds -> seconds
Index: sbin/dhclient/dhclient.conf.5
===
RCS file: /cvs/src/sbin/dhclient/dhclient.conf.5,v
retrieving revision 1.50
diff -u -p -r1.50 dhclient.conf.5
--- sbin/dhclient/dhclient.conf.5 10 Feb 2020 13:18:20
hi,
On 2020/07/15 21:28, sc.dy...@gmail.com wrote:
> hi,
>
> The patch works well on Intel PCH xhci, but not on AMD Bolton xHCI.
> I'll investigate this problem.
Bolton xHCI sometimes raises following events.
(I added printf Completion Code.)
#246 cc 13 remain 0 type 5 origlen 2048
On Fri, 17 Jul 2020, Jeremy C. Reed wrote:
> > To get a response with the AD flag set, the request itself also needs
> > to have the AD flag set.
I re-read your post again and see you already clarified this.
On Fri, 17 Jul 2020, Jesper Wallin wrote:
> To get a response with the AD flag set, the request itself also needs
> to have the AD flag set.
...
> -#define RES_DEFAULT(RES_RECURSE | RES_DEFNAMES | RES_DNSRCH)
> +#define RES_DEFAULT(RES_RECURSE | RES_DEFNAMES | RES_DNSRCH | RES_USE_AD)
On Mon, Jul 13, 2020 at 07:39:41PM +0100, Laurence Tratt wrote:
> video(1) allows users to adjust controls such as brightness, saturation
> (etc.) depending on the input device in question. These values persist even
> after video(1) has quit, allowing you to e.g. increase the brightness of a
>
Hi all,
I recently decided to add SSHFP records for my servers, since I never
memorize or write down my key fingerprints. I learned that if I
want ssh(1) to trust these records, DNSSEC needs to be enabled for my
zone. To validate these records, ssh(1) is using getrrsetbyname(3),
which checks if
On Thu, Jul 16, 2020 at 4:55 PM Scott Cheloha
wrote:
> > On Jul 16, 2020, at 19:36, Theo de Raadt wrote:
> >
> >> Note the third sentence.
> >>
> >> Given that, I reason that a serializing instruction before *and* after
> >> the RDTSC should freeze it in place.
> >
> > I haven't seen anyone
On Fri, Jul 17, 2020 at 03:59:38PM +0200, Stefan Sperling wrote:
> While measuring Tx performance at a fixed Tx rate with iwm(4) I observed
> unexpected dips in throughput measured by tcpbench. These dips coincided
> with one or more gap timeouts shown in 'netstat -W iwm0', such as:
> 77
Subj. Also add NET_ASSERT_LOCKED() to pipex_{link,unlink,rele}_session()
to be sure they called under NET_LOCK().
Index: sys/net/pipex.c
===
RCS file: /cvs/src/sys/net/pipex.c,v
retrieving revision 1.120
diff -u -p -r1.120 pipex.c
While measuring Tx performance at a fixed Tx rate with iwm(4) I observed
unexpected dips in throughput measured by tcpbench. These dips coincided
with one or more gap timeouts shown in 'netstat -W iwm0', such as:
77 input block ack window gaps timed out
Which means lost frames on the
Subj.
Index: sys/net/if_pppx.c
===
RCS file: /cvs/src/sys/net/if_pppx.c,v
retrieving revision 1.97
diff -u -p -r1.97 if_pppx.c
--- sys/net/if_pppx.c 17 Jul 2020 08:57:27 - 1.97
+++ sys/net/if_pppx.c 17 Jul 2020 13:51:14
We are going to lock the whole pipex(4) by NET_LOCK(). So move
`multicast_session' freeing undet NET_LOCK() too.
Index: sys/net/pipex.c
===
RCS file: /cvs/src/sys/net/pipex.c,v
retrieving revision 1.120
diff -u -p -r1.120 pipex.c
---
ping?
> On 10 Jul 2020, at 14:59, Vitaliy Makkoveev wrote:
>
> Some pseudo interfaces have missing `IFXF_CLONED' flag. Diff below fixes
> this.
>
> Index: sys/net/if_ppp.c
> ===
> RCS file: /cvs/src/sys/net/if_ppp.c,v
> retrieving
I came across this by reading the code if_iwn.c and DPRINTFs on
a kernel with IWN_DEBUG.
IWN_LSB() returns an index starting with 1, however the arrays used
later on (noise and gain in iwn5000_set_gains()) start with 0. The
current code accounts for this difference when setting the antenna
gain
Seems useful. While it's not especially likely anyone is parsing the output
of this, just in case they are it's usually more admin-friendly to add a
new column at the end unless there's a good reason not to.
--
Sent from a phone, apologies for poor formatting.
On 16 July 2020 21:29:50
Recently a stat(2) call was added to load_server_config() of ssh to
avoid reallocs. However, a buffer of 'st_size' length might be too
short to hold the null terminator of the string.
Add one more byte to the size, if it is sure that we can't overflow.
Gerhard
Index: usr.bin/ssh/servconf.c
anyone?
On Fri, Jul 10, 2020 at 02:59:55PM +0300, Vitaliy Makkoveev wrote:
> Some pseudo interfaces have missing `IFXF_CLONED' flag. Diff below fixes
> this.
>
> Index: sys/net/if_ppp.c
> ===
> RCS file: /cvs/src/sys/net/if_ppp.c,v
Without /etc/hostname.pfsync0 there will be no such interface upon boot.
Feedback? OK?
Index: faq/pf/carp.html
===
RCS file: /cvs/www/faq/pf/carp.html,v
retrieving revision 1.63
diff -u -p -r1.63 carp.html
--- faq/pf/carp.html28
On Fri, Jun 26, 2020 at 07:55:43AM +0200, Theo Buehler wrote:
> This adds an stoeplitz_random_seed() function that generates a random
> Toeplitz key seed with an invertible matrix T. This is necessary and
> sufficient for the hash to spread out over all 65536 possible values.
>
> While it is
Hi,
The following diff adds Realtek RTL8125B support to rge(4) and uses
if_rxring to manage the number of filled slots on the rx ring.
Tested with the TP-LINK TL-NG421 adapter.
Index: share/man/man4/pci.4
===
RCS file:
21 matches
Mail list logo
