Re: bge: don't use autopoll on anything above BCM5705

2013-05-29 Thread David Gwynne
ive tested this on: bge0 at pci4 dev 0 function 0 Broadcom BCM5721 rev 0x21, BCM5750 C1 (0x4201): apic 0 int 16, address 00:18:f3:d1:80:64 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 bge1 at pci5 dev 0 function 0 Broadcom BCM5720 rev 0x00, BCM5720 A0 (0x572), APE firmware

Re: bge: don't use autopoll on anything above BCM5705

2013-05-29 Thread Mike Belopuhov
On 29 May 2013 09:35, David Gwynne d...@openbsd.org wrote: ive tested this on: bge0 at pci4 dev 0 function 0 Broadcom BCM5721 rev 0x21, BCM5750 C1 (0x4201): apic 0 int 16, address 00:18:f3:d1:80:64 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 bge1 at pci5 dev 0 function 0

mg(1) dired opening ~/

2013-05-29 Thread Mark Lumsden
Currently dired mode doesn't use the adjustname() function early enough when passed ~. For example typing 'M-x dired', then: Dired: ~ Doesn't open your home directory. However, with this diff mg behaves like emacs. ok? mark Index: dired.c

pflow and NAT

2013-05-29 Thread Chris Cappuccio
I upgraded a 4.9 box to 5.3 recently and found pflow is behaving in new ways. Pflow used to report the source IP before NAT was performed. Today, it reports the translated source IP rather than the untranslated one. I was using it to keep a record of NAT translations, which isn't possible now.

Re: bge: don't use autopoll on anything above BCM5705

2013-05-29 Thread David Gwynne
On 30/05/2013, at 2:56 AM, Mike Belopuhov m...@belopuhov.com wrote: cool, thanks! does your 5719 work w/o other diffs? yes, otherwise i would have fixed it :) dlg

mg(1) - use more adjustname() in dired

2013-05-29 Thread Mark Lumsden
The dired-copy-file and dired-rename-file commands do not use adjustname() for the new path. Hence 'M-x dired-copy-file': Dired: ~/filename will not work. This diff fixes that behaviour. ok? mark Index: dired.c === RCS file: