On Fri, Aug 19, 2016 at 02:38:32PM +1000, Jonathan Gray wrote:
>
> Perhaps even handle the modesetting ioctls and use the modesetting
> driver with xorg?
BTW, to add a kms drm driver for a simple framebuffer based graphics
output, the code written duing GSoC 2015 by leo grange may be a good
start
On Fri, Aug 19, 2016 at 02:38:32PM +1000, Jonathan Gray wrote:
> Have you considered directly attaching the i2c bus to your other
> driver without creating a new driver and using drm_edid.c ?
>
> Perhaps even handle the modesetting ioctls and use the modesetting
> driver with xorg?
I had consider
On Fri, Aug 19, 2016 at 02:38:32PM +1000, Jonathan Gray wrote:
> On Thu, Aug 18, 2016 at 04:34:38PM -0400, Ian Sutton wrote:
> > On Sat, Aug 06, 2016 at 04:26:27AM -0400, Ian Sutton wrote:
> > > Interestingly, the am335x SoC does not have a HDMI/DP/etc transmitter on
> > > silicon -- the BBB has it
On Thu, Aug 18, 2016 at 04:34:38PM -0400, Ian Sutton wrote:
> On Sat, Aug 06, 2016 at 04:26:27AM -0400, Ian Sutton wrote:
> > Interestingly, the am335x SoC does not have a HDMI/DP/etc transmitter on
> > silicon -- the BBB has its LCDC pins wired to a TDA19988 HDMI
> > transmitter which is additiona
On Thursday, August 18, 2016, Mark Kettenis wrote:
...
>
> > > There is a functional change here. Our current ld.so doesn't run
> > > DT_INIT and DT_FINI for the main executable. The ELF standard is a bit
> > > ambiguous about this, but Linux does run tose for the main executable.
> > > And Sola
Hello,
The 2nd Edition UNIX source is incomplete over at TUHS[1] however there
is a scan of a printed draft copy of the 2nd Edition manual[2], stty
appears to be listed in the table of contents (page 7).
Attached patch amends the HISTORY section of stty(1) to say v2 rather
than v3 and bumps date.
On Sat, Aug 06, 2016 at 04:26:27AM -0400, Ian Sutton wrote:
> Interestingly, the am335x SoC does not have a HDMI/DP/etc transmitter on
> silicon -- the BBB has its LCDC pins wired to a TDA19988 HDMI
> transmitter which is additionally backwired to one of the am335x's i2c
> ports:
>
> "nxp,tda998x"
While everyone is looking at com(4)...
Some systems use reserved (and sometimes not) bits of the MCR register
for extra features. In particular, on some systems, clearing the DCS bit
in the MCR is not a good idea (kudos if you can guess what historical
machine I am thinking of).
It makes sense fo
Currently we mark page table entries as invalid to do reference
emulation. This is a bit complicated as the XN bit for "small"
(normal 4K) pages has been stuffed into the two-bit type field.
That's why all those
/* XXX use of L2_V7_S_XN */
comments were in the code for. But ARMv7 define
Handling EINTR with connect(2) is tricky enough that I think it
deserves an example that people can copy & paste into their own
code.
Is it worth expanding the part before connect_wait()?
- todd
Index: lib/libc/sys/connect.2
===
RC
On 18/08/2016 06:07, Theo de Raadt wrote:
> It appears the goal here is to be accurate regarding minor amusing
> documentation details. That's good, the same detailing will reflects
> in code as well.
>
> Well, then don't send a diff alone. Provide all the proof. History
> is complicated and
On Wed, Aug 17, 2016 at 11:47:40PM +0200, Remi Locherer wrote:
> Hi
>
> I think there is a small mistake in relayd.conf.5.
>
> Remi
>
fixed, as per reyk's ok.
thanks,
jmc
>
> Index: relayd.conf.5
> ===
> RCS file: /cvs/src/usr.s
Christian Weisgerber wrote:
>I guess. There _are_ problems in this area, though.
>
>$ case x in x);; *);; esac
>$ echo $(case x in x);; *);; esac)
>ksh: syntax error: `;;' unexpected
This should probably be in BUGS section, not as a note in the middle of the
manual. Eg.:
Index: ksh.1
On Thu, Aug 18, 2016 at 10:08:32AM +0200, Martin Natano wrote:
> ksh.1 states:
>
> Note: $(command) expressions are currently parsed by finding the
> matching
> parenthesis, regardless of quoting. This should be fixed soon.
>
> Seems like the "soon" mentioned here is already past.
>
On 2016-08-18, Martin Natano wrote:
> ksh.1 states:
>
> Note: $(command) expressions are currently parsed by finding the
> matching
> parenthesis, regardless of quoting. This should be fixed soon.
>
> Seems like the "soon" mentioned here is already past.
>
> $ echo $(echo "clo
On Thu, Aug 18, 2016 at 12:49:42PM +0100, Jason McIntyre wrote:
> On Wed, Aug 17, 2016 at 11:47:40PM +0200, Remi Locherer wrote:
> > Hi
> >
> > I think there is a small mistake in relayd.conf.5.
> >
> > Remi
> >
> >
> > Index: relayd.conf.5
> > ==
On Wed, Aug 17, 2016 at 11:47:40PM +0200, Remi Locherer wrote:
> Hi
>
> I think there is a small mistake in relayd.conf.5.
>
> Remi
>
>
> Index: relayd.conf.5
> ===
> RCS file: /cvs/src/usr.sbin/relayd/relayd.conf.5,v
> retrieving
On Thu, Aug 18, 2016 at 11:57:29AM +0200, Mark Kettenis wrote:
> > Date: Thu, 18 Aug 2016 11:41:52 +0200
> > From: Marcus Glocker
> >
> > On Wed, Aug 17, 2016 at 04:05:05PM +0200, Mark Kettenis wrote:
> >
> > > > Date: Wed, 17 Aug 2016 15:36:21 +0200
> > > > From: Marcus Glocker
> > > >
> > >
> Date: Thu, 18 Aug 2016 11:41:52 +0200
> From: Marcus Glocker
>
> On Wed, Aug 17, 2016 at 04:05:05PM +0200, Mark Kettenis wrote:
>
> > > Date: Wed, 17 Aug 2016 15:36:21 +0200
> > > From: Marcus Glocker
> > >
> > > Enables FIFO for Synopsis DesignWare APB UART.
> > >
> > > ok?
> >
> > Appare
On Wed, Aug 17, 2016 at 04:05:05PM +0200, Mark Kettenis wrote:
> > Date: Wed, 17 Aug 2016 15:36:21 +0200
> > From: Marcus Glocker
> >
> > Enables FIFO for Synopsis DesignWare APB UART.
> >
> > ok?
>
> Apparently the FIFO is optional. There is a register that tells you
> whether it is enabled
> Date: Wed, 17 Aug 2016 12:50:54 -0700
> From: Philip Guenther
>
> On Wed, 17 Aug 2016, Mark Kettenis wrote:
> ...
> > Functions listed by DT_PREINIT_ARRAY get run immediately after ld.so has
> > finished loading and relocating all shared objects. This happens only
> > for the main executable.
There are three callers of update_vattr(). Two of them don't use the
updated struct vattr afterwards, so the call can be removed. Following
diff removes both calls and the function itself, inlining the last
remaining call.
While there I removed this gem:
#if (S_BLKSIZE == 512)
ksh.1 states:
Note: $(command) expressions are currently parsed by finding the
matching
parenthesis, regardless of quoting. This should be fixed soon.
Seems like the "soon" mentioned here is already past.
$ echo $(echo "closing: )")
closing: )
$
Ok? Am
23 matches
Mail list logo
