Thu, Oct 09, 2014 at 11:54:12AM CEST, s...@stsp.name napsal(a):
On Thu, Oct 09, 2014 at 06:23:17AM +0200, Jiri Navratil wrote:
Hello,
I bought acer TravelMate notebook TMB115-M-COEA to follow -current and
partitipate on LibreSSL.
I installed system from snapshot and used softraid0 crypto on whole sd0.
After first boot I have Passsphrase prompt and I can't contine. It looks
like keyboard is not working. No response after Enter. I assume, that
I'm providing same password as during install. There is no response at
all.
Can I debug this somehow?
I may install the machine again without crypto and then try to use
softraid0 crypto on external drive, but not sure, if this can be helpfull
for debuging and reporting.
Is there something next I can experiment with and provide something valuable
here?
Thank you,
Jiri
--
Jiri Navratil, http://kouc.navratil.cz, +420 222 767 131
Did you try booting into the install media, select 'shell', and then
attaching your softraid crypto disk with bioctl? Does that work?
Can you provide a dmesg?
Thank you Bio and Stefan for responses.
I can boot now from installed system. Not sure, which step helped. The
BIOS looks not fully ok for me.
I did these steps
Based on https://www.mail-archive.com/misc@openbsd.org/msg132652.html I
looked in to BIOS and did the only thing possible with USB. I switched Boot
Mode from Legacy to UEFI, which lead into error - no boot device. Then I
switched back to legacy and booted USB stick with miniroot56.fs and
attached softraid crypto disk just fine. Then I halted system. New boot
directly from harddrive worked fine. (I wass able to answer Passphrase
question and system booted fine).
So thank you for your help. It's working now.
I'm attaching first boot dmesg and dmesg from compiled kernel. They are
already on dm...@openbsd.org. May be this can have value for someone.
I noticed in dmesg this error:
RTC BIOS diagnostic error 80clock_battery
Can clock battery be dead on new machine? Or the BIOS is not good schape?
WiFi is not working. I see Intel Dual Band Wireless AC 7260 in dmesg.
Screen stay blank after resume from suspend (both console and X blank,
machine accessible via network).
Best regards,
Jiri
