All,
I had implemented a network using openospf and initially left
router-priorities off. Problem is I kept coming up FULL/OTHER and would
not get routes. I changed the router priority values (not to match as when
I matched got the same). I changed one side of a line to 10, while the
other was
On 08/19/14 21:45, Tim Epkes wrote:
All,
I had implemented a network using openospf and initially left
router-priorities off. Problem is I kept coming up FULL/OTHER and would
not get routes. I changed the router priority values (not to match as when
I matched got the same). I changed one
Agree with once elected a DR he stays that way (eliminates a lot of
bouncing). My issue was that both sides became FULL/OTHER. I stopped all
and removed all router priorities and let them go default. When I brought
it all back up, most went FULL/OTHER on both sides so I got nothing. I am
using
On 2014/08/19 18:32, Tim Epkes wrote:
Agree with once elected a DR he stays that way (eliminates a lot of
bouncing). My issue was that both sides became FULL/OTHER.
I get this sometimes, usually after a link has gone away for a bit but
hasn't lost link, normally restarting ospfd on one router
