Hello.
I've tested 3 different PCI USB 2.0 controllers on the latest snapshot
but each of them has been halted during boot of the GENERIC kernel. All that
controllers work fine on the different i386 platforms.
chip VIA VT6212L:
OpenBSD/hppa BOOT 1.2
boot>
booting dk5a:/bsd: 4190208+1253376+606208 [80+203648+186846]=0x6a5774
SPID bits: 0xfe0, error = 0
pdc_coproc: 0xc0, 0xc0; model 10 rev 1
WARNING: BTLB purge failed
WARNING: cannot block map kernel text
[ using 391028 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.3-beta (GENERIC) #27: Fri Feb 15 20:09:52 MST 2013
dera...@hppa.openbsd.org:/usr/src/sys/arch/hppa/compile/GENERIC
HP 9000/785/B1000 (AllegroLow W) PA-RISC 2.0a
real mem = 1073741824 (1024MB)
rsvd mem = 524288 (512KB)
avail mem = 1045942272 (997MB)
mainbus0 at root [flex fff80000]
pdc0 at mainbus0
power0 at mainbus0 offset 400804
lcd0 at mainbus0 offset 5d0008: model 0
cpu0 at mainbus0 offset ffa0000 irq 31: PCXW L1-A 300MHz, FPU PCXW rev 1
cpu0: 512K(64b/l) Icache, 1024K(64b/l) wr-back Dcache, 160 coherent TLB
mem0 at mainbus0 offset ed10200: size 1024MB
astro0 at mainbus0 offset ed00000: Astro rev 2.1
elroy0 at astro0 offset ed3c000: Elroy TR2.1 APIC ver 20, 7 pins
pci0 at elroy0
elroy1 at astro0 offset ed38000: Elroy TR2.1 APIC ver 20, 7 pins
pci1 at elroy1
elroy2 at astro0 offset ed32000: Elroy TR2.1 APIC ver 20, 7 pins
pci2 at elroy2
uhci0 at pci2 dev 5 function 0 "VIA VT83C572 USB" rev 0x61: line 1 irq 2
uhci1 at pci2 dev 5 function 1 "VIA VT83C572 USB" rev 0x61: line 5 irq 3
ehci0 at pci2 dev 5 function 2 "VIA VT6202 USB" rev 0x63: line 3 irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
elroy3 at astro0 offset ed30000: Elroy TR2.1 APIC ver 20, 7 pins
pci3 at elroy3
dc0 at pci3 dev 12 function 0 "DEC 21142/3" rev 0x41: line 2 irq 6, address
00:10:83:36:20:0b
lxtphy0 at dc0 phy 1: LXT970 10/100 PHY, rev. 3
"Analog Devices AD1889 Audio" rev 0x00 at pci3 dev 13 function 0 not configured
pciide0 at pci3 dev 14 function 0 "NS PC87415 IDE" rev 0x03: DMA, channel 0
configured to native-PCI, channel
1 configured to native-PCI
pciide0: using line 0 irq 7 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL SE2.1A>
wd0: 16-sector PIO, LBA, 2014MB, 4124736 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-532E-B, 2.0A> ATAPI 5/cdrom removable
wd0(pciide0:0:0): using BIOS timings, DMA mode 2
cd0(pciide0:0:1): using BIOS timings, DMA mode 2
ssio0 at pci3 dev 14 function 1 "NS 87560 Legacy I/O" rev 0x01: line 0 irq 7
com0 at ssio0 offset 3f8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at ssio0 offset 2f8 irq 3: ns16550a, 16 byte fifo
lpt0 at ssio0 offset 378 irq 7
ohci0 at pci3 dev 14 function 2 "NS USB" rev 0x02: line 0 irq 7, version 1.0,
legacy support
siop0 at pci3 dev 15 function 0 "Symbios Logic 53c896" rev 0x04: line 1 irq 8,
using 8K of on-board RAM
scsibus1 at siop0: 16 targets, initiator 7
siop0: switching to single-ended mode
siop1 at pci3 dev 15 function 1 "Symbios Logic 53c896" rev 0x04: line 1 irq 8,
using 8K of on-board RAM
scsibus2 at siop1: 16 targets, initiator 7
sd0 at scsibus2 targ 5 lun 0: <SEAGATE, ST336607LC, 0007> SCSI3 0/direct fixed
serial.SEAGATE_ST336607LC_3JAX0RVN00007516ZSR5
sd0: 35003MB, 512 bytes/sector, 71687372 sectors
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "NS OHCI root hub" rev 1.00/1.00 addr 1
ehci0: unrecoverable error, controller halted
chip ALi M5273:
OpenBSD/hppa BOOT 1.2
boot>
booting dk5a:/bsd: 4190208+1253376+606208 [80+203648+186846]=0x6a5774
SPID bits: 0xfe0, error = 0
pdc_coproc: 0xc0, 0xc0; model 10 rev 1
WARNING: BTLB purge failed
WARNING: cannot block map kernel text
[ using 391028 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.3-beta (GENERIC) #27: Fri Feb 15 20:09:52 MST 2013
dera...@hppa.openbsd.org:/usr/src/sys/arch/hppa/compile/GENERIC
HP 9000/785/B1000 (AllegroLow W) PA-RISC 2.0a
real mem = 1073741824 (1024MB)
rsvd mem = 524288 (512KB)
avail mem = 1045942272 (997MB)
mainbus0 at root [flex fff80000]
pdc0 at mainbus0
power0 at mainbus0 offset 400804
lcd0 at mainbus0 offset 5d0008: model 0
cpu0 at mainbus0 offset ffa0000 irq 31: PCXW L1-A 300MHz, FPU PCXW rev 1
cpu0: 512K(64b/l) Icache, 1024K(64b/l) wr-back Dcache, 160 coherent TLB
mem0 at mainbus0 offset ed10200: size 1024MB
astro0 at mainbus0 offset ed00000: Astro rev 2.1
elroy0 at astro0 offset ed3c000: Elroy TR2.1 APIC ver 20, 7 pins
pci0 at elroy0
elroy1 at astro0 offset ed38000: Elroy TR2.1 APIC ver 20, 7 pins
pci1 at elroy1
elroy2 at astro0 offset ed32000: Elroy TR2.1 APIC ver 20, 7 pins
pci2 at elroy2
ohci0 at pci2 dev 5 function 0 "Acer Labs M5237 USB" rev 0x03: line 5 irq 2,
version 1.0, legacy support
ohci1 at pci2 dev 5 function 1 "Acer Labs M5237 USB" rev 0x03: line 3 irq 3,
version 1.0, legacy support
ohci2 at pci2 dev 5 function 2 "Acer Labs M5237 USB" rev 0x03: line 4 irq 5,
version 1.0, legacy support
ehci0 at pci2 dev 5 function 3 "Acer Labs M5239 USB2" rev 0x01: line 1 irq 6
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
elroy3 at astro0 offset ed30000: Elroy TR2.1 APIC ver 20, 7 pins
pci3 at elroy3
dc0 at pci3 dev 12 function 0 "DEC 21142/3" rev 0x41: line 2 irq 7, address
00:10:83:36:20:0b
lxtphy0 at dc0 phy 1: LXT970 10/100 PHY, rev. 3
"Analog Devices AD1889 Audio" rev 0x00 at pci3 dev 13 function 0 not configured
pciide0 at pci3 dev 14 function 0 "NS PC87415 IDE" rev 0x03: DMA, channel 0
configured to native-PCI, channel
1 configured to native-PCI
pciide0: using line 0 irq 8 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL SE2.1A>
wd0: 16-sector PIO, LBA, 2014MB, 4124736 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-532E-B, 2.0A> ATAPI 5/cdrom removable
wd0(pciide0:0:0): using BIOS timings, DMA mode 2
cd0(pciide0:0:1): using BIOS timings, DMA mode 2
ssio0 at pci3 dev 14 function 1 "NS 87560 Legacy I/O" rev 0x01: line 0 irq 8
com0 at ssio0 offset 3f8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at ssio0 offset 2f8 irq 3: ns16550a, 16 byte fifo
lpt0 at ssio0 offset 378 irq 7
ohci3 at pci3 dev 14 function 2 "NS USB" rev 0x02: line 0 irq 8, version 1.0,
legacy support
siop0 at pci3 dev 15 function 0 "Symbios Logic 53c896" rev 0x04: line 1 irq 9,
using 8K of on-board RAM
scsibus1 at siop0: 16 targets, initiator 7
siop0: switching to single-ended mode
siop1 at pci3 dev 15 function 1 "Symbios Logic 53c896" rev 0x04: line 1 irq 9,
using 8K of on-board RAM
scsibus2 at siop1: 16 targets, initiator 7
sd0 at scsibus2 targ 5 lun 0: <SEAGATE, ST336607LC, 0007> SCSI3 0/direct fixed
serial.SEAGATE_ST336607LC_3JAX0RVN00007516ZSR5
sd0: 35003MB, 512 bytes/sector, 71687372 sectors
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "NS OHCI root hub" rev 1.00/1.00 addr 1
ehci0: unrecoverable error, controller halted
chip NEC D720102GC:
OpenBSD/hppa BOOT 1.2
boot>
booting dk5a:/bsd: 4190208+1253376+606208 [80+203648+186846]=0x6a5774
SPID bits: 0xfe0, error = 0
pdc_coproc: 0xc0, 0xc0; model 10 rev 1
WARNING: BTLB purge failed
WARNING: cannot block map kernel text
[ using 391028 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.3-beta (GENERIC) #27: Fri Feb 15 20:09:52 MST 2013
dera...@hppa.openbsd.org:/usr/src/sys/arch/hppa/compile/GENERIC
HP 9000/785/B1000 (AllegroLow W) PA-RISC 2.0a
real mem = 1073741824 (1024MB)
rsvd mem = 524288 (512KB)
avail mem = 1045942272 (997MB)
mainbus0 at root [flex fff80000]
pdc0 at mainbus0
power0 at mainbus0 offset 400804
lcd0 at mainbus0 offset 5d0008: model 0
cpu0 at mainbus0 offset ffa0000 irq 31: PCXW L1-A 300MHz, FPU PCXW rev 1
cpu0: 512K(64b/l) Icache, 1024K(64b/l) wr-back Dcache, 160 coherent TLB
mem0 at mainbus0 offset ed10200: size 1024MB
astro0 at mainbus0 offset ed00000: Astro rev 2.1
elroy0 at astro0 offset ed3c000: Elroy TR2.1 APIC ver 20, 7 pins
pci0 at elroy0
elroy1 at astro0 offset ed38000: Elroy TR2.1 APIC ver 20, 7 pins
pci1 at elroy1
elroy2 at astro0 offset ed32000: Elroy TR2.1 APIC ver 20, 7 pins
pci2 at elroy2
ohci0 at pci2 dev 5 function 0 "NEC USB" rev 0x44: line 1 irq 2, version 1.0
ehci0 at pci2 dev 5 function 1 "NEC USB" rev 0x05: line 1 irq 2
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
elroy3 at astro0 offset ed30000: Elroy TR2.1 APIC ver 20, 7 pins
pci3 at elroy3
dc0 at pci3 dev 12 function 0 "DEC 21142/3" rev 0x41: line 2 irq 3, address
00:10:83:36:20:0b
lxtphy0 at dc0 phy 1: LXT970 10/100 PHY, rev. 3
"Analog Devices AD1889 Audio" rev 0x00 at pci3 dev 13 function 0 not configured
pciide0 at pci3 dev 14 function 0 "NS PC87415 IDE" rev 0x03: DMA, channel 0
configured to native-PCI, channel
1 configured to native-PCI
pciide0: using line 0 irq 5 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL SE2.1A>
wd0: 16-sector PIO, LBA, 2014MB, 4124736 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-532E-B, 2.0A> ATAPI 5/cdrom removable
wd0(pciide0:0:0): using BIOS timings, DMA mode 2
cd0(pciide0:0:1): using BIOS timings, DMA mode 2
ssio0 at pci3 dev 14 function 1 "NS 87560 Legacy I/O" rev 0x01: line 0 irq 5
com0 at ssio0 offset 3f8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at ssio0 offset 2f8 irq 3: ns16550a, 16 byte fifo
lpt0 at ssio0 offset 378 irq 7
ohci1 at pci3 dev 14 function 2 "NS USB" rev 0x02: line 0 irq 5, version 1.0,
legacy support
siop0 at pci3 dev 15 function 0 "Symbios Logic 53c896" rev 0x04: line 1 irq 6,
using 8K of on-board RAM
scsibus1 at siop0: 16 targets, initiator 7
siop0: switching to single-ended mode
siop1 at pci3 dev 15 function 1 "Symbios Logic 53c896" rev 0x04: line 1 irq 6,
using 8K of on-board RAM
scsibus2 at siop1: 16 targets, initiator 7
sd0 at scsibus2 targ 5 lun 0: <SEAGATE, ST336607LC, 0007> SCSI3 0/direct fixed
serial.SEAGATE_ST336607LC_3JAX0RVN00007516ZSR5
sd0: 35003MB, 512 bytes/sector, 71687372 sectors
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NS OHCI root hub" rev 1.00/1.00 addr 1
ehci0: unrecoverable error, controller halted
Cheers,
Ivan
