Mark Sims skrev:
Here is an updated version of the good Lady Heather's GPS Disciplined
Oscillator control program for the Thunderbolt. This version adds command
line support for setting the video mode:
/VS = 800x600
/VM = 1024x768 (default)
/VL = 1280x960 (also good for 1280x1024)
I had similar probs with trying to run on WinxP Home – just a few coloured
dots at the top of a black screen. But then I read the words
the compiled version is for DOS/WIN98 and mayby WIN ME, WIN/NT DOS
mode on systems with a VESA compatible video BIOS.
Martin G8BHC
2009/1/31 Magnus Danielson
I tried it on my Compaq 486 running WIN98SE I get a black screen
with Logoff on it and a couple of other lines that make no sense ?
Who has the Rosetta Stone ??
73, Dick, W1KSZ
-Original Message-
From: Mark Sims hol...@hotmail.com
Sent: Jan 29, 2009 9:27 PM
To: time-nuts@febo.com
Richard W. Solomon skrev:
I tried it on my Compaq 486 running WIN98SE I get a black screen
with Logoff on it and a couple of other lines that make no sense ?
Who has the Rosetta Stone ??
I do not know... British Museum maybe?
I tried to recompile in my Cygwin environment but with no luck,
Hi all, I am running an AMD Duron 700MHz running W98SE when run the program
opens a DOS window but crashes the video monitor until the program is
stopped with the escape key. So some of the problems may be with the monitor
parameters which may not support the high res that a lot will be running
Both the old new versions of Heather run fine on my Win-XP pc here. Help
only flashes on the screen, but the 3 screen options all work fine.
73,
Bob
K1REM
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com]on
Behalf Of Magnus Danielson
Sent:
Bob Martinson wrote:
Both the old new versions of Heather run fine on my Win-XP pc here. Help
only flashes on the screen, but the 3 screen options all work fine.
runs fine on my 2 x winxp-pro machines and I just tried an old win2K
laptop - again works fine.
Its a pity people are having
Does anyone know if it is possible to use the HP4352A/B VCO/PLL
analyzers with signal generators other than the 8665A? What is
involved?
I have a sig gen which is plenty good, so buying an 8665 just to go
with a 4352 (which you can now get for about $1K) seems like a waste.
Thanks,
Matt
Hi Matt:
Where can I get one for that price?
The Sig Gen phase noise is the driving spec since it needs to be better than
the phase noise of the VCO you are measuring.
Have Fun,
Brooke Clarke
http://www.prc68.com
Matt Ettus wrote:
Does anyone know if it is possible to use the HP4352A/B
For you volt-nuts out there...
There's a fellow in California, John Lion (LionElectronicLabs at
BigPlanet dot com) who has a supply of temperature-chamber-aged and then
hand-selected LM-199AH references that he will install into an HP 3456A
DMM for a fairly reasonable price.
I don't know how
There's a 4352B on ebay for a $1K start bid, but there's a reserve.
There's a 4352A for $1999 Buy it Now with an Or Best Offer option.
In general, this is an absolutely great time to get modern test
equipment at very low cost. With the economy down, everybody wants to
get rid of inventory. I
Hello again Magnus,
If the program is started up and it is not seeing the Tbolt on the COM port you
should see the Log: OFF indicator, two lines of text that are the plot area
header, and the plot axes/grid. Pressing the SPACE bar should bring up a
help screen in place of the plot grid.
Magnus Danielson skrev:
Mark Sims skrev:
Here is an updated version of the good Lady Heather's GPS Disciplined
Oscillator control program for the Thunderbolt. This version adds command
line support for setting the video mode:
/VS = 800x600
/VM = 1024x768 (default)
/VL = 1280x960 (also
Mark Sims skrev:
Hello again Magnus,
Hi Mark,
If the program is started up and it is not seeing the Tbolt on the COM
port you should see the Log: OFF indicator, two lines of text that
are the plot area header, and the plot axes/grid. Pressing the
SPACE bar should bring up a help screen
I'm trying to bring the Win32 version up to date with the graphical version,
but am dealing with a bug that apparently puts the Thunderbolt into some
kind of mode where it returns junk data over the serial line. My Win32
build runs for a minute or so, draws some graphs that don't make sense, and
I need to clarify something about my earlier posting regarding the 3456A
upgrade.
The upgrade involves more than dropping in a new part; there are other
circuit changes also required. Lion Electronics does the conversion,
but doesn't supply the parts separately (after all, he's in business!).
O Nuts of Time,
I was recently asked to make a big PDF file of the HP AC-4 counter
modules manual that I have had on my website for a few years as a
series of jpeg files. So I did...
http://www.nixiebunny.com/hpac4/hpac4.pdf
These modules are used in the ancient HP 521 to 524 series of
17 matches
Mail list logo
