Am Thu, 12 Nov 2015 18:14:57 -0800
schrieb "Richard (Rick) Karlquist" :
>
>
> On 11/12/2015 1:01 PM, William Schrempp wrote:
> >
> > has failed. I hear old machinists complaining about new machinists
> > who can't drill a hole if the drill-press isn't
> >
Hi Arthur
Thanks for the feedback, that's an interesting find and obviously
something to keep in mind.
As you know Pawel originally designed the prescaler for the CNT85/PM6685,
although in earlier Ebay listings he did comment that it also worked for
the CNT80/PM6680, and taking a look at
I went to Collins soldering school in the late 1960's. I also learned to tie
the special Collins-knot for wrapping wires into neat cable bundles for
airplanes, and still remember how to do both.
I also built a 6-digit clock using TTL chips and nixie tubes in the early
1970's. Looked great and
On Sun, Nov 15, 2015 at 3:13 AM, Mark Sims wrote:
> My bet is was just a power glitch or a corrupted message that raised the
> alarm and that your unit is OK. If the error reoccurs then you may have a
> hardware problem.
After some further poking and prodding, I think
A mentor of mine did airplane wiring during WW II. They initially used cable
lacing that was likely similar to your Collins method. What they found was a
machine gun bullet that penetrated the airframe caused more damage due to the
laced cable bundles. At some point the changed to just laying
Hi
Which counter would be best for use with time pod I have a chance to buy each
at a reasonable prices i.e. < 1000 US
Thanks in advance Scott
Content by Scott
Typos by Siri
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
Hi
I guess the first question would be - If you have a Time Pod, what do you need
a counter for?
Based on a guess that you need extended frequency range, either would do pretty
well. My vote
would go to the HP for a couple of reasons:
1) It’s more broadly supported in terms of driver software
And don't wipe your soldering iron on your wash-and-wear fatigues as we
used to do with the cotton ones.
Al, k9si
And I agree, don't solder in the nude or while wearing shorts, and don't
walk barefoot in your workshop.
___
time-nuts mailing
Thanks Bob
I'm using the actual time pod for paying activities. This would be a counter
for time nuttery using the time pod software. In those cases Where I don't
want to fire up the 5071.
I'm familiar with the Keysight counters and I have a lot of them into the high
Ghz ranges
The 53131
On Sun, November 15, 2015 3:59 pm, Bob Camp wrote:
> I guess the first question would be - If you have a Time Pod, what do you
> need a counter for?
Or was the original question a slip, and was supposed to be which counter
is good for use with TimeLab software?
--
Chris Caudle
More of a slip as I've noted I have a time pod for work but I'd like to add a
small counter for time nuttery as power is not cheap in NE so running the 5371A
for long runs can get expensive
Content by Scott
Typos by Siri
> On Nov 15, 2015, at 4:08 PM, Chris Caudle
11 matches
Mail list logo