-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Daun Yeagley
Sent: Sunday, January 21, 2007 6:42 PM
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] 10811 warmup (Jason Rabel)
Hi Jason
I might have something for you
To: [EMAIL PROTECTED]; 'Discussion of precise time and frequency
measurement'
Subject: Re: [time-nuts] 10811 warmup (Jason Rabel)
Made'm red just for ya in the updated 10811 manual
DO NOT OPERATE THE OVEN CIRCUITS WHEN THE OVEN MASS IS OUTSIDE OF THE
OSCILLATOR
INSULATED HOUSING. DOING SO
: Sunday, January 21, 2007 1:04 AM
To: [EMAIL PROTECTED]; 'Discussion of precise time and frequency
measurement'
Subject: Re: [time-nuts] 10811 warmup (Jason Rabel)
Made'm red just for ya in the updated 10811 manual
DO NOT OPERATE THE OVEN CIRCUITS WHEN THE OVEN MASS IS OUTSIDE OF THE
OSCILLATOR
PROTECTED] On Behalf
Of Jason Rabel
Sent: Sunday, January 21, 2007 4:36 PM
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] 10811 warmup (Jason Rabel)
Thanks Bruce,
I think we have gotten a little off-subject here... My issue is not with the
oven, but the oscillator
Is it okay to power up the main assembly once it is removed
from the outer shell / insulation?
The oscillator circuit, yes. The oven circuit, no.
Is there any way to test just the crystal can easily
(assuming it doesn't rattle)?
Yes, follow the instructions in manual section 8-95. You
Yep yep... Thanks to all who have replied... I just finished reading the
whole service section of the manual, so I think I'll just take it one step
at a time and see how it goes. I'm still hoping for a loose connection or
broken wire, who knows.
I must of read at least 15 times 'do not power up
Jason Rabel wrote:
I must of read at least 15 times 'do not power up the oven circuit' in the
documentation... lol.
I am trying to think of why they say this. I don't see why
you can't power the oven when it is disassembled. I can see
that it might not reach 80 degrees or might oscillate and
AM
To: Discussion of precise time and frequency measurement
Cc: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] 10811 warmup (Jason Rabel)
Jason Rabel wrote:
I must of read at least 15 times 'do not power up the oven circuit' in the
documentation... lol.
I am
