On Mon, Apr 28, 2008 at 4:15 PM, Rick Karlquist [EMAIL PROTECTED] wrote:
I worked for Zeta Labs many years ago. This multiplier
undoubtedly has a step recovery diode that is being driven
at a level of a good watt or two. In most cases there was
a hefty transistor to make this power. You
Hi Matt:
Is it possible to make a DC measurement (DMM Diode function) of the SRD forward
and reverse voltage?
Have Fun,
Brooke Clarke
http://www.prc68.com/P/Prod.html Products I make and sell
http://www.prc68.com/Alpha.shtml All my web pages listed based on html name
http://www.PRC68.com
Just bought a
Zeta Labs X76 Multiplier 7600 MHz Output Model 5856-01
on ebay. Anybody have any info on these? What kind of drive should I give it?
Thanks,
Matt
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
Matt Ettus wrote:
Just bought a
Zeta Labs X76 Multiplier 7600 MHz Output Model 5856-01
on ebay. Anybody have any info on these? What kind of drive should I give
it?
Thanks,
Matt
Matt,
You'll be very lucky to find data for an old exotic beast like that. It looks
like a step
I worked for Zeta Labs many years ago. This multiplier
undoubtedly has a step recovery diode that is being driven
at a level of a good watt or two. In most cases there was
a hefty transistor to make this power. You probably need
+10 dBm or so to drive it, maybe as much as +20 dBm. Take
the
Thanks Rick. My main reason for buying this is to be able to better
measure the phase noise of my 100 MHz oscillator. I figured this
would give a truer measure than a brick since there is no PLL
involved. But then I thought there might be too much filtering going
on. If the filters are at
This is a complicated question. First of all, there is definitely
no crystal filter involved. However, the multiplier can have its
own phase noise due to either the amplifier or the SRD. There can
also be AM to PM conversion and vice versa. I have found the
technique of multiplying a source to