Re: [time-nuts] source for ICS525 demo board ...
I assume you've seen phk's page about doing similar things to the soekris boards? http://phk.freebsd.dk/soekris-pps/ His page says that he used an ICS 521 instead of an ICS 525, but (a) you're basically on the same page, and (b) I think that it was a typo and that he actually used a 525. :) Did you check digikey and jameco for the demo board? -Dave On Thu, Feb 16, 2006 at 09:29:54PM -0800, John Pettitt scribed: I've been toying with the idea of replacing the crystal in one of my soekris 4801's (it's 27Mhz for the Geode processor) with a signal synthesized from the 5Mhz GPS disciplined output of my TrueTime box - the ICS525 looks like a good part to use to do the work and I was wondering if anybody has used this part in a project and can point at a good source for the demo board with seems to be a quick and dirty way of implementing what I want John W6/G6KCQ ___ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
Re: [time-nuts] source for ICS525 demo board ...
In message [EMAIL PROTECTED], John Pettitt writes: I've been toying with the idea of replacing the crystal in one of my soekris 4801's (it's 27Mhz for the Geode processor) with a signal synthesized from the 5Mhz GPS disciplined output of my TrueTime box - the ICS525 looks like a good part to use to do the work and I was wondering if anybody has used this part in a project and can point at a good source for the demo board with seems to be a quick and dirty way of implementing what I want Apart from bugging ICS a lot, I know of no source. I keep hoping that the TAPR people will issue a board with it... -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 [EMAIL PROTECTED] | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. ___ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
