On Sun, Aug 11, 2013 at 03:12:00PM +0200, Magnus Danielson wrote:
I'm sure that the NTP drivers can be hacked to make necessary
adjustments without too much code.
I seem to have been caught by the same time warp (or a similar one)
on a GPS unit that I've been using with our NTP server since
Le 14 août 2013 à 09:44, David Malone a écrit :
On Sun, Aug 11, 2013 at 03:12:00PM +0200, Magnus Danielson wrote:
I'm sure that the NTP drivers can be hacked to make necessary
adjustments without too much code.
I seem to have been caught by the same time warp (or a similar one)
on a GPS
David, Well Done, your patch has breathed life into some refclocks I thought
had reached the end of the road.
--marki
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf
Of David Malone
Sent: Wednesday, 14 August 2013 5:44 PM
To: Magnus
Hi
Commercial system:
1) GPS is giving wrong time, NTP is still running (as a slave)
2) GPS is broke
3) Manufacturer says they won't fix / patch the obsolete GPS
4) Buy new GPS on company credit card
Whole process likely takes less than an hour.
Bob
On Aug 14, 2013, at 3:58 AM, mc235960
Hi all
Due to ongoing requests, I am producing another batch of ThunderBolt Displays.
With 80 units already produced and shipped worldwide, this will be the third
and last batch.
For more information of this device, please refer to:
http://vk4ghz.com/thunderbolt-display/
The concept and
Paul said:
As a reference comparison wwvb is quite poor compared to loran c or GPS
approx 3 decades worse. But it sure is interesting to watch. Its a shame
paper recorders aren't anymore. I loved to pull a strip over a day or 2 and
look. Now I use a Dig-i-tal recorder works very well makes great
Yeah, after trying to (reliably) get the time out of the pertinent TSIP
message using an Arduino UNO, I can understand your statement Adam about
the Arduino approach. It kinda works, but it felt like I was fighting the
implementation of the controller card and that I should cut-over to my own
What was the problem you found. Other then a new to you platform? I'm
trying to understand why reading serial data would be hard.
An advantage of the Adruino is that you don't need to make a PCB. Even if
you want to do something like add a graphical display or and SD card for
logging they just
Anyone have a pinout and power supply requirements for a frequency
electronics fe-2129b 5 Mhz oscillator???
Thanks,
Corby
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
On 08/14/2013 12:25 PM, Bob Camp wrote:
Hi
Commercial system:
1) GPS is giving wrong time, NTP is still running (as a slave)
2) GPS is broke
3) Manufacturer says they won't fix / patch the obsolete GPS
4) Buy new GPS on company credit card
Whole process likely takes less than an hour.
So
I'm looking for information about mounting (packaging) quartz
crystals with conductive epoxy such as:
1. Recommended type of epoxy.
2. Curing time and temperature.
3. Surface preparation of the gold.
4. Experts/consultants in this area you could recommend.
(Note: this refers to mounting
Yes indeed tick tick tick. But its funny if something happens and the pen
jumps you can tell its worth going over for a look. SIDs and such. The
digital ones make no noise.
On Wed, Aug 14, 2013 at 12:55 PM, Robert Roehrig k9...@yahoo.com wrote:
Paul said:
As a reference comparison wwvb is
Paul,
On 08/15/2013 03:45 AM, paul swed wrote:
Yes indeed tick tick tick. But its funny if something happens and the pen
jumps you can tell its worth going over for a look. SIDs and such. The
digital ones make no noise.
They made software that simulates the loudness of shouting on the trade
Mark and David,
On 08/14/2013 12:24 PM, Mark C. Stephens wrote:
David, Well Done, your patch has breathed life into some refclocks I thought
had reached the end of the road.
It should be noted that they way GPS works, most if not all GPS
receivers will process the data properly including leap
14 matches
Mail list logo
