> Le 25 mai 2016 à 16:59, David a écrit :
>
> I was designed as a transmitter hunting antenna sacrificing size and
> gain for minimum side lobes.
I’ve got to see your selfie.
"The power of accurate observation is commonly called cynicism by those who
have not got
In message , "Mike Monett" writes:
>The wikipedia article states "To avoid magnetic inrush, only for
>transformers with an air gap in the core, the inductive load needs
>to be synchronously connected near a supply voltage peak."
You ought to have
On Wed, 25 May 2016 09:59:33 -0500
David wrote:
> I was designed as a transmitter hunting antenna sacrificing size and
> gain for minimum side lobes. You can see a photo of it on the front
> cover of October 1995 73 magazine.
For those who are also wondering what it looks
Hi fellow time-nuts,
sorry for keeping quiet after having dropped my question. I was busy travelling
an since yesterday our booth at the IMS2016/MTT keeps me busy too.
I will answer to the various comments as soon as I got some more quiet minutes.
I look forward to see many time-nuts this
On Wed, 25 May 2016 19:33:37 +0200, you wrote:
>
>> Le 25 mai 2016 à 16:59, David a écrit :
>>
>> I was designed as a transmitter hunting antenna sacrificing size and
>> gain for minimum side lobes.
>
>Ive got to see your selfie.
It was not a selfie. Joe Moell, K0OV,
Hi Corby,
That was really what I was hoping for from the small Rb's too, but
there appears to be other things at work with them.
I had not really considered that they might be sealed, but it's
something to look at. I had been thinking more about how it was fixed
into the package and with what
On Wed, May 25, 2016 at 9:59 AM, Mike Monett
wrote:
> >Am 23.05.2016 um 05:15 schrieb Jim Palfreyman:
> >> As far as a remedy goes we are going to try a solid state relay that
> only
> >> switches on at 0V in the AC waveform. This should slow the inrush
> current,
>
Am 25.05.2016 um 18:59 schrieb Mike Monett:
This analysis shows switching at 0V is the best option.
No, it doesn't. :-)
First, the single inductor does not represent a transformer; the second
inductor
and the coupling declaration ( style: K1 L1 L2 0.99 or so) and the load are
missing.
The
Hello,
A recently published paper might be of interest to the time-nuts community. We
studied how well an unmodified commercial software defined radio (SDR)
device/firmware could serve in comparing high-performance oscillators and
atomic clocks. Though we chose to study the USRP platform, the
On Wed, May 25, 2016 at 12:59 PM, Mike Monett
wrote:
LTspice shows switching at 0V is the best point in time. ...
Bzzzt! Your simulation is seriously flawed, and your conclusions are
wrong. What you forgot, or may not have realized, is that SPICE's initial
Reminds me of the 1950's living in Wildwood, NJ. We had a TV antenna on the
roof to pick up stations from Philadelphia - 80 miles away. When ever an
airplane flew over you would see flutter and distorted sound!
73,
Bill, WA2DVU
Cape May
-Original Message-
From: time-nuts
On Mon, 23 May 2016 11:49:37 -0500
David Witten wrote:
> My knowledge in this area is superficial. But I wondered if anyone in this
> group had a reaction to the 5-May issue of nature that includes a 'News and
> Views' piece and a formal article reporting the detection by
From: Wes
A cleaver design, but the OP wanted 1pps. I have the Leo Bodnar GPSDO. It
too
is a nice frequency standard, but it doesn't know what time it is.
=
This box can do either 10 MHz or 1 PPS.
http://leontp.com/
"Coming soon"
Cheers,
David
--
Hi
Multipath on GPS normally requires a couple of things:
1) The satellite you are trying to lock on to needs to be obscured. Being below
the
local horizon is one normal way for this to happen.
2) The satellite signal needs to be reflected off of something that does not
put in enough
Still do, to this day!
With my OTA HD TV and living in the vicinity of ABIA in Austin, TX.
When the wind is out of the north, and they take off to the north darn
planes!
Don
N5CID
-Original
On 5/24/2016 7:26 PM, David wrote
The 2 meter
directional antenna I ultimately designed was good enough to not only
track airlines by their reflected RF, but it could see reflections and
shadows from nearby objects like street lights and trees which
ultimately limited outside performance
As part of the IETF Network Time Security (NTS) effort, it would be helpful
to understand the importance of NTP's symmetric peering mode. Can folks on
this list please share their experience with NTP's symmetric mode?
Do you use it, and if so why (or why not), and if so in what operational
On Wed, 25 May 2016 06:34:46 -0700, you wrote:
>On 5/24/2016 7:26 PM, David wrote
>>The 2 meter
>> directional antenna I ultimately designed was good enough to not only
>> track airlines by their reflected RF, but it could see reflections and
>> shadows from nearby objects like street lights
>Am 23.05.2016 um 05:15 schrieb Jim Palfreyman:
>> As far as a remedy goes we are going to try a solid state relay that only
>> switches on at 0V in the AC waveform. This should slow the inrush current,
>> and hopefully the magnetic impulse.
>
>In the context of transformers and motors, switching
19 matches
Mail list logo