I was going to build the GPS reference by Brooks Shera
http://www.rt66.com/~shera/index_fs.htm
and have bought the PCB and started populating it (not much yet).
But now I am wondering if buying a used Z3801A might not be a better idea.
My thoughts are:
1) Cost - the Z3801A will probably cost less
- Original Message -
From: Dr. David Kirkby [EMAIL PROTECTED]
Subject: [time-nuts] Brooks Shera's GPS standard or HP Z3801A??
6) If one needs to buy a manual on the Z3801A, that will add to its cost.
When I bought mine from BuyLegacy 3 years ago it came with a printed
manual... I have
i'm new to this mailing list and a collector of timekeeping instruments
mainly in the field of vinatge patek philippe quartz 19 inch rack models
like early 60ties, 70ties MI,MS or T3 if that does ring a bell to the one
or the other among you. (i can mail pics in case anybody is interested)
i
Just thought I would post a note on what is happening
with websites hosting HP/Agilent manuals. It seems that
Agilent has decided to rein in on websites that are hosting
copies of HP/Agilent manuals. They have sent take-down notices
to BAMA, and ebay, amoung others. They seem to be most
Chuck Harris wrote:
Just thought I would post a note on what is happening
with websites hosting HP/Agilent manuals.
I have received a definative statement from Agilent on this. I will NOT
post full details at this time, until I have received confirmation of
permission from Agilent.
But
Quick note to my fellow nuts
I have posted the Operations manual for the FTS 4060 C-Beam at the
following address www.to-way.com/tf.html I will try and add other
interesting items as I have time.
Best to all,
Had, K7MLR
___
time-nuts mailing list
Are you saying that some HP- counters/timers/whatever would ship
with an 10811A, whereas another instrument with the same model number
and options ordered would ship with a different oscillator?
It's hard to say. I've seen mil-spec versions of
the 5238A shipped with a EGG 10811 clone. It
In message [EMAIL PROTECTED], Tom Van Baak writes:
Don't forget that a PRS10 Rb from eBay and a Oncore M12+T from
synergy-gps.com would be both cheaper and more stable.
Good point. Has someone posted a Z3801A vs.
PRS10/M12+ comparison? I have a lot of data
on the PRS10 but haven't put an M12+
Does anyone have diagrams for the cesium module?
Hubert
DB7ME
-Ursprüngliche Nachricht-
Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im
Auftrag von Had
Gesendet: Montag, 25. April 2005 19:24
An: time-nuts-febo.com
Betreff: [time-nuts] FTS 4060 Op Manual
Quick note to my fellow nuts
Hi John:
As far as I know all you can do is see what messages are being send and
turn each one off.
Have Fun,
Brooke
John Ackermann N8UR wrote:
Is there a way to tell a Motorola UT+ that is outputting some unknown
set of messages in binary format to stop all output? I don't want to do
a
John,
Reset is really about the only way to do it unless you can see what messages
are coming out and disable them one at a time. If you have LOTS of time you can
just cycle through all the messages and shut them off, but resetting is
probably the easiest thing to do.
Randy Warner
Senior
On Mon, 25 Apr 2005, David Kirkby wrote:
I won an auction on eBay for a book
PHASE NOISE IN SIGNAL SOURCES, IEE, by W P ROBINS.
Yes I have this book and it has been helpful but not always correct. I do
recommend owning it though.
Jeffrey Pawlan
Randy Warner wrote:
John,
Reset is really about the only way to do it unless you can see what messages
are coming out and disable them one at a time. If you have LOTS of time you
can just cycle through all the messages and shut them off, but resetting is
probably the easiest thing to do.
At 07:07 PM 4/25/2005 -0400, Mike S wrote:
2) Anyone have a .pdf of the user/service manual? Mine, I believe, is a
fairly late production (series 2311) for the A. If not, I suppose I'll
wait and see what Agilent is up to with the old docs.
I have a 5370A book on hand. It's on load from a friend,
I've been using an Agilent 82357A USB interface. Plenty fast enough for most
applicationa and a lot easier to move between machines including laptops...
Found mine on ebay for about half price though they seem quite rare.
- Original Message -
From: Mike S [EMAIL PROTECTED]
To:
As the proud new owner of a 5370A, a couple of requests of the list:
1) What do you use/recommend for an HP-IB/IEEE-488 interface for
a PC? (PCI bus). It looks like these things go for more than I
paid for the 5370A! Linux compatibility?
I use the linux-gpib drivers and library with
16 matches
Mail list logo
