Re: [time-nuts] Why .30 cal holes can't be seen at 800 yds...

2010-11-04 Thread d . seiter
Since when is the Anarchist Cookbook censored??? I have an original copy that I'm saving for a sale about 30 years from now. ($$$ I hope) It's really a rather simple publication with too much obvious information and questionable recipes, or so I've been told by people who should know. Dave -

[time-nuts] Chicago Master Clock Video

2010-11-04 Thread J. Forster
http://video.pbs.org/video/1579336059/ -John ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.

Re: [time-nuts] Setting clocks 100 years ago

2010-11-04 Thread Bill Hawkins
Antonio, The earliest purpose for mechanical clocks was religious, so they appeared in church towers in the 1600's. They were set by sundials. The 1800's brought the telegraph and precision telescopes. Once it was possible to transmit time signals at near the speed of light, and to determine star

Re: [time-nuts] Changing WECO connectors to BNC

2010-11-04 Thread William H. Fite
Perrier, I really appreciate your level of detail as I am about to undertake the same mods you discussed. Your experience tells me what to expect as I have not yet popped the case. It also motivated me to go hunt out my unibits. Let me know how it goes and I will do the same. Bill On Thu,

Re: [time-nuts] Why .30 cal holes can't be seen at 800 yds...

2010-11-04 Thread Bill Hawkins
And that is why lawyers have taken over the world - fear of the unknown. Bill Hawkins -Original Message- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Heathkid Sent: Thursday, November 04, 2010 8:46 PM To: Discussion of precise time and frequency measu

[time-nuts] Randomly stumbled on this...

2010-11-04 Thread Jim Palfreyman
http://www.marketwatch.com/story/frequency-electronics-awarded-contract-for-chip-scale-atomic-clock-2010-11-04?reflink=MW_news_stmp ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-n

Re: [time-nuts] Why .30 cal holes can't be seen at 800 yds...

2010-11-04 Thread Heathkid
I wasn't giving legal advice... just pointing out one can purchase the targets (not make them). Be legal and obey all laws... if you have to purchase through someone with a FFL make sure the transfer is legal (or even possible) and be responsible. Good advice Bob. But this did start out as a

Re: [time-nuts] Setting clocks 100 years ago

2010-11-04 Thread Alan Melia
Good question, probably to allow the Astronomer Royal's staff to take a transit and check their clocks for that day. Alan - Original Message - From: "WB6BNQ" To: "Discussion of precise time and frequency measurement" Sent: Friday, November 05, 2010 12:11 AM Subject: Re: [time-nuts] Sett

Re: [time-nuts] Setting clocks 100 years ago

2010-11-04 Thread Alan Melia
Hi Antonio 170 years ago in the UK the time was beginning to be distributed by telegraph. In the UK the railways were the driving force for this and a universal (countrywide) time. Prior to that all the towns in the UK had a local time I dont know where it came from but could be a sundial at a

Re: [time-nuts] Greenwich time ball

2010-11-04 Thread Bob Camp
Hi Been there done that. Rest of the family was more impressed by the view than by the chronometers ... Bob On Nov 4, 2010, at 8:19 PM, Bob Marinelli wrote: > Hi Bill, > > The astronomers were busy doing their noon transit sighting at noon. They > ball on Flamsteed House drops at 1:00. Th

Re: [time-nuts] Greenwich time ball

2010-11-04 Thread Bob Marinelli
Hi Bill, The astronomers were busy doing their noon transit sighting at noon. They ball on Flamsteed House drops at 1:00. The navigators on ships in the harbor were also likely doing a sight at noon, they set their clock at 1:00 by looking up at the observatory on the hill. BTW, the vi

Re: [time-nuts] Setting clocks 100 years ago

2010-11-04 Thread WB6BNQ
OK Bob, I'LL bite ! Why is it 1:00 pm for the ball ? BillWB6BNQ Bob Marinelli wrote: > Hi Murray, > > Actually, the ball at Greenwich drops at 1:00 pm every day. For > everyone who can get to London, the observatory is well worth at least > a half day visit, they have several working Har

Re: [time-nuts] Setting clocks 100 years ago

2010-11-04 Thread Bob Marinelli
Hi Murray, Actually, the ball at Greenwich drops at 1:00 pm every day. For everyone who can get to London, the observatory is well worth at least a half day visit, they have several working Harrison clocks and yes you can set your wristwatch at 1:00 when the ball drops :) there is also a

Re: [time-nuts] Setting clocks 100 years ago

2010-11-04 Thread Neville Michie
Sun dials easily give you time to about 2 minutes. You have to apply the equation of time but that its often given on the sun dial. A reasonable long case clock would maintain a minute a week, so you would need a lot of cloudy weather to seriously lose track of time. There was not a need of m

Re: [time-nuts] Setting clocks 100 years ago

2010-11-04 Thread Bob Camp
Hi My guess would be the 1600's. They certainly had everything they would need before 1620. Bob On Nov 4, 2010, at 7:49 PM, Hal Murray wrote: > >> I suspect that if your town was prosperous enough you had a noon sight setup >> that gave you a bit better accuracy than the sun dial. > > When

[time-nuts] Setting clocks 100 years ago

2010-11-04 Thread Murray Greenman
Navigators used chronometers to determine their longitude. If they were stopped in one place long enough, they could work out longitude by a complicated process of star and lunar observations; however, when they left an established port, they usually took with them a time standard based on local me

Re: [time-nuts] Setting clocks 100 years ago

2010-11-04 Thread Hal Murray
> I suspect that if your town was prosperous enough you had a noon sight setup > that gave you a bit better accuracy than the sun dial. When did clocks get good enough to notice the analemma? -- These are my opinions, not necessarily my employer's. I hate spam. ___

Re: [time-nuts] Setting clocks 100 years ago

2010-11-04 Thread J. Forster
In major ports, which were often protected by forts, there was often a "noon gun". In fact there is a joke/math olympics question about the soldier who fired the noon gun, setting his watch every morning by a jewelers clock. The jeweler set his clock every day by the fort's noon gun. -John =

Re: [time-nuts] Setting clocks 100 years ago

2010-11-04 Thread Bob Camp
Hi The simple answer is "that depends". One big driver for putting up a clock tower in the middle of town was to indeed have "one standard" that the town could run on. Without that - everybody is on their own. The main clock was often regulated by a simple sundial sitting someplace convenient

Re: [time-nuts] Setting clocks 100 years ago

2010-11-04 Thread J. Forster
My impression is that before the Railways and Telegraph, each town had time, based on local solar time, determined by a a noon sight or something similar. That means that towns kept time based on their longditude. Until the railways went long distances, Standard Time and Time Zones were not needed

[time-nuts] Changing WECO connectors to BNC

2010-11-04 Thread Perry Sandeen
Gents, Wrote:< Yikes, WECO is hard to find. Anyone know a source for WECO 439A/440A connectors and adapters? Optimist that I am, I thought they would be easy to find. Coping with an HP 3336B. Wrote: https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.

[time-nuts] Setting clocks 100 years ago

2010-11-04 Thread iov...@inwind.it
This evening I happened to hear the nearby church's bell tolling 10 pm, and thought that 100+ years ago this could have been the "official" time of the town, which maybe was used by people to set their own clocks (if any). But then I wondered, who told the priest what time was it? To what ext

Re: [time-nuts] Why .30 cal holes can't be seen at 800 yds...

2010-11-04 Thread Robert Darlington
Be careful about giving legal advice. These are not legal where I live. Making explosives in any quantity is legal at a federal level in all 50 states without any kind of license but those darn states and cities make laws to restrict that. Mixing tannerite turns it into a federally, state, and lo

Re: [time-nuts] Why .30 cal holes can't be seen at 800 yds...

2010-11-04 Thread Heathkid
Here are some exploding targets that are legal: http://www.tannerite.com/ A friend uses them and swears by them. On 11/3/2010 11:28 PM, jimlux wrote: Michael Conlen wrote: There's always nitroglycerin. I've heard it reacts well to vibration. nitromethane is much more readily available and

Re: [time-nuts] WECO aren't hard to find

2010-11-04 Thread William H. Fite
Yes, I ordered some from them yesterday. Thanks. On Wed, Nov 3, 2010 at 11:56 PM, Flemming Larsen wrote: > I have purchased WECO to BNC adapters from: > www.milestek.com > -- FL > > > --- Den ons 3/11/10 skrev William H. Fite : > > Fra: William H. Fite > Emne: [time-nuts] Yikes, WECO is

Re: [time-nuts] HP Z3801 Life time

2010-11-04 Thread ernieperes
Hi, many thanks to everybody who responded.. now everything is clear.. thanks a lot. Best regards, Ernie. -Original Message- From: Rex To: Discussion of precise time and frequency measurement Sent: Thu, Nov 4, 2010 2:54 am Subject: Re: [time-nuts] HP Z3801 Life time I