On Fri, May 11, 2012 at 1:27 AM, Chris Albertson
albertson.ch...@gmail.comwrote:
I've alway have thought that if nanosecond level jitter is bad then
breathing while listening must be really bad. If you inhale the path
length from your ear to the speaker changes at the microsecond level.
I'll either be at the TAPR booth inside (booths 455-458, in the same vicinity
as the ARRL and AMSAT booths), wandering the flea market searching for The
Great Bargain, or hanging out at the flea spaces Bob mentioned.
We'll have a T2-Mini demo running at the TAPR booth (and product available for
Hi All
I am building the Brooke Shera GPSDO controller board but have run into
problems sourcing U7.
I have tried without success for a few days to obtain or at least find a
source of:
ECS300S-24
XC 313
DCO 2400
ECS-240-3-C3X1A
EXO 35M
I have tried RS Components, Farnell, Mouser,
Maybe you can remind us what U7 is. Someplace I have a schematic but
not handy right now.
On Sun, May 13, 2012 at 5:24 AM, Kevin Staley kevin.sta...@virgin.net wrote:
Hi All
I am building the Brooke Shera GPSDO controller board but have run into
problems sourcing U7.
Chris Albertson
Redondo
It is the Xtal with 1/4
Bert Kehren
In a message dated 5/13/2012 10:52:47 A.M. Eastern Daylight Time,
albertson.ch...@gmail.com writes:
Maybe you can remind us what U7 is. Someplace I have a schematic but
not handy right now.
On Sun, May 13, 2012 at 5:24 AM, Kevin Staley
It is an 8 pin DIP, 24 MHz oscillator with an onboard divide output in order
to provide a dual output oscillator. It is an ECS-300CX-240 and DigiKey
lists it as obsolete since 2009. They say 'call'. They also show stock on
the 12.8 MHz chip. I wonder if that would work?
Joe
-Original
On Sun, May 13, 2012 at 8:11 AM, J. L. Trantham jlt...@att.net wrote:
It is an 8 pin DIP, 24 MHz oscillator with an onboard divide output in order
to provide a dual output oscillator. It is an ECS-300CX-240 and DigiKey
lists it as obsolete since 2009. They say 'call'.
Sounds like a you could
Hi all
Thanks for the many responses.
It would seem that U7 is pretty rare.
I think I will be going with a 24 MHz Can oscillator and a separate 6MHz
source for the PIC either divided from the 24MHz oscillator or a separate
oscillator.
Thanks again
Kevin
-Original Message-
From:
A radical procedure (short of replacing the Trimble Asic) is to take a brush
and brush the pins on the pcb. Hard, but not hard enough to damage the board or
the pins. Then clean the pcb with alcohol and compressed air.
Trimble uses RoHs solder, which will eventually generate tin whiskers that
Hello to the group
Can't seem to pickup wwvb. Have several different rcvrs and antennas. Its
either really weak or not there and been that way since Friday. Looked at
the nist site and no real notice of any sort.
Thanks
Paul
___
time-nuts mailing list --
On Sun, May 13, 2012 at 12:27 PM, paul swed paulsw...@gmail.com wrote:
Hello to the group
Can't seem to pickup wwvb. Have several different rcvrs and antennas. Its
either really weak or not there and been that way since Friday.
Where are you located? Maybe the lack of signal is related to
Just checked my Spectracom and it is locked and time synced at 19:48 UTC from
Edmonton, AB.
Shaun M
Sent from my iPad3
No Regret
On 2012-05-13, at 13:27, paul swed paulsw...@gmail.com wrote:
Hello to the group
Can't seem to pickup wwvb. Have several different rcvrs and antennas. Its
Chris east coast the signal is indeed there at -128db thats easily 30 plus
db lower then normal. Or its Englands 60 kc MSF station that I am hearing.
(quite possible)
On Sun, May 13, 2012 at 3:43 PM, Chris Albertson
albertson.ch...@gmail.comwrote:
On Sun, May 13, 2012 at 12:27 PM, paul swed
Shaun
Thanks. Boy perplexing.
Regards
Paul.
On Sun, May 13, 2012 at 3:51 PM, paul swed paulsw...@gmail.com wrote:
Chris east coast the signal is indeed there at -128db thats easily 30 plus
db lower then normal. Or its Englands 60 kc MSF station that I am hearing.
(quite possible)
On Sun,
It's OK here in southern Kentucky.
Regards.
Max. K 4 O DS.
Email: m...@maxsmusicplace.com
Transistor site http://www.funwithtransistors.net
Vacuum tube site: http://www.funwithtubes.net
Woodworking site
http://www.angelfire.com/electronic/funwithtubes/Woodworking/wwindex.html
Music site:
Good site had not run into it before
Thanks
On Sat, May 12, 2012 at 6:54 PM, J. Forster j...@quikus.com wrote:
Hi,
I fround this site this evening:
http://w140.com/tekwiki/wiki/Main_Page
The scans are not as good as some commercial pones, but the price is
right. It has manuals that are
A 74AC74 in SO-14 package mounted dead bug style will make a handy /4 that is
no bigger than most crystal oscillators.
If that's still too big, you can go with the TSSOP, but no coffee for you for a
week prior to soldering that baby :)
Didier KO4BB
Sent from my BlackBerry Wireless thingy
I have always been interested in trying to improve the look of the 'dead
bug' style.
How about a small PCB with an 8 pin DIP connector that is used to mount the
oscillator, the divide by 4 and get power, ground and provide 24 MHz and 6
MHz outputs to the 8 pin DIP. That way, the 'little
Hi:
Is there a manual, data sheet, docs of any kind or software for the FEI Pico
Sync?
http://www.prc68.com/I/FEIFS.shtml#Picosync
--
Have Fun,
Brooke Clarke
http://www.PRC68.com
http://www.end2partygovernment.com/Clarke4Congress.html
___
19 matches
Mail list logo
