this summer.
Bill Reed ree...@otelco.net
-Original Message-
From: Alexander Pummer
Sent: Monday, June 02, 2014 5:18 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] VNA design
Although I used to work for one of the competitor, I still do have
Hi,
I have a set of extender boards for the HP 5355 as follows:
05355-60023
05335-60025
05355-60021
05355-60020
05355-60024
If $ 75.00 including shipping in US seems reasonable contact me or make offer.
Bill Reed
---
This email is free from viruses and malware because avast! Antivirus
Hi Perrier,
Thanks, I would like the documents.
I have a HP 3586B and its sensitivity is right on for the 20 Hz and 400 Hz
bands but is about 30 dB low for the 3100 Hz band.
I have manuals but have not found the fault. Do you have suggestions?
Regards,
Bill
br...@otelco.net
-Original
Hi,
Does anyone know the suitability of this module for GPSDO ?
I am new to the group.
Thanks,
Bill R
http://www.ebay.com/itm/Navman-jupiter-T-Tu60-GPS-Kit-1pps-10khz-GPS-Module-/260790984470?pt=US_Ham_Radio_Amplifiershash=item3cb85a9f16
___
Hi Merv,
Thanks. I will try one.
This is a great group!
Bill
-Original Message-
From: Merv Thomas
Sent: Thursday, September 19, 2013 9:01 PM
To: time-nuts@febo.com
Subject: Re: [time-nuts] GPS with 10KHz output
Hi Bill,
I have a number of these modules purchased from the
under Impulse.
Bill Reed256 586-3446
-Original Message-
From: ct1dmk
Sent: Sunday, December 29, 2013 7:36 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] fast edge, rise time.
Thank you all for your comments on this subject.
Happy new year
Hi,
Since there is no interest in my pulse generator maybe one of you knows
someone at NBS who can provide a schematic of the generator.
It has NBS Impulse Generator SN 3-75-2 engraved on the front panel and
is ~ 10 x 16 x 17.
Thanks,
Bill Reed
-Original Message-
From: Bill
-25-4.pdf
From the age of the paper, I'd say this generator is probably more than 40
years young.
On Mon, Jan 13, 2014 at 2:22 PM, Bill Reed br...@otelco.net wrote:
Hi,
Since there is no interest in my pulse generator maybe one of you knows
someone at NBS who can provide a schematic
and curious what does it weigh? I would guess since its NIST a
lot.
Regards
Paul
WB8TSL
On Wed, Jan 15, 2014 at 1:15 PM, Bill Reed br...@otelco.net wrote:
Thanks Mark
I must have serial number 2 of that series of IPG's. The one in the
article is SN-3-75-1 and mine is SN-3-75-2.
It was probably
Hi,
I have a GPS board with “Motorola 84D43796M02” on the board.
The Rx chip has M 58M01 and WORB on it.
The shielded cage has what appears to be a 19.09 MHz oscillator. The frequency
is hard to read.
A chip (oscillator ?)outside of the cage has 32.768 VT on it.
It has a double row 10 pin
a stored file)?
If anybody has any experience with ProfiLab. I would like to know it
capabilities before procuring. I have the demo but it seems to be missing some
dll’s that are required.
Contact me offline if you do not want a new thread.
Bill Reed
br...@otelco.net
---
This email has been
I have an NI GPIB board ( $ 29.00 on Ebay ) with an ISA connector. The
computer I use has Win 98SE with one ISA and several PCI.
NI has two short programs ( ULI and Ibconf ) that will allow QB45 to
interface with the ISA board. I have interfaced with several instruments
with no trouble ( HP
I have a service manual for the 6080A/AN. The cal procedure may be the same.
Bill Reed
-Original Message-
From: John Ackermann N8UR
Sent: Tuesday, August 11, 2015 6:06 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Fluke/Gigatronics 6060 series
locked systems I contracted Dr. Gardner to conduct a course
on phase locked techniques at MSFC. This course became the basis
for his book. He gave me a signed copy.
Bill Reed
-Original Message-
From: Alexander Pummer
Sent: Friday, October 16, 2015 5:33 PM
To: Discussion of precise time
systems I contracted Dr. Gardner to conduct a course
on phase locked techniques at MSFC. This course became the basis
for his book. He gave me a signed copy.
Bill Reed
-Original Message-
From: Alexander Pummer
Sent: Friday, October 16, 2015 7:05 PM
To: Discussion of precise time
Hi,
I got at auction three CXR LARUS 54500-9 chassis.
They slots are empty – no cards included.
The chassis have two GPSDO slots and 13 others ???
The back panel has:
1. Two TNC antenna connectors
2. Three BNC connectors
a. 10 MHz
b. 1 PPS
c. IRIG-B
3. RJxx TCC/IP
4. A
suggestions?
Bill Reed
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
HP3325A_HP3478A_Sweep.vi
Description: Binary data
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https
17 matches
Mail list logo