Hi ,
these jumps when tapping is normal when the HP5065A is restored to the life
ater a long storage time, they disappears after a long warmup (weeks).
Luciano
Da "time-nuts" time-nuts-boun...@febo.com
A "Ulf Kylenfall" ulf_...@yahoo.com,"Discussion of precise time and
Charles,
Imagine having a source and fixed resistors with TC equal to zero.
The current variation of the coil varies between 2.5 and 6 mA.
In addition, the relationship between current and frequency variation of the
HP5065A is not linear.
If the pot is short-circuit, the current
Hi Corby,
I would first like to thank you for sharing your precious studies with us.
I love the HP5065A because it's an extremely interesting project and I'm
convinced like you we have a lot of room for improving its performance.
*
In addition
pse replace: 1k sec 6.64 E-15
with: 1k sec 6.64 E-14
Luciano
Da "time-nuts" time-nuts-boun...@febo.com
A t...@leapsecond.com, time-nuts@febo.com
Cc
Data Sat, 11 Nov 2017 14:38:29 +0100
Oggetto Re: [time-nuts] Favorite counters (current production)?
Hi
Hi all,
just for info the ADEV noise floor of my TICC is:
1 sec 6.35 E-11
10 sec 6.33 E-12
100 sec 6.30 E-13
1k sec 6.64 E-15
best regards ,
Luciano
Da "time-nuts" time-nuts-boun...@febo.com
A "Discussion of precise time and frequency measurement"
Hi Corby,
about the C field ten turn pot you write is a low TC pot. Normally a good
Vishay pot is 20 PPM/C, This is in conflict with the 1PPM resistors ad voltage
reference.
What kind of pot do you have used?
http://www.mouser.com/ds/2/427/533534-768216.pdf
Luciano
timeok
Hi Charles,
what you refer is the resistance relation referred to the LM299 source
around 14VDc but you have to consider
the tuning range of the pot, in the original HP5065A is 2E10-9.
Of course, it depends on the setting value of the variable resistance, but
you have to consider a
Hi,
I have a Trimble Thunderbolt.
I'm looking for the command to reset the registry that blocks the update of
the Date once full.
Can someone help me?
thanks,
Luciano
www.timeok.it
___
time-nuts mailing list -- time-nuts@febo.com
Hi,
I'm looking for a connection on the Thunderbolt board, a logical level, that
showme when the GPSDO is locked to the GPS.
Can someone help me?
Luciano
www.timeok.it
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go
Hi all,
Thank you all for the precious answers and the links you sent me.
I'm studying them very carefully.
I still continue to look for the manual of the 5950 because I like to keep
the manuals of all the measuring instruments I have in my laboratory.
Thanks again
Luciano
Da "tim...@timeok.it" tim...@timeok.it
A att...@kinali.ch
Cc
Data Tue, 12 Jun 2018 07:22:26 +0200
Oggetto Re: [time-nuts] Raw phase data of super-5065
Ciao Attila,
here the .gif file.
Luciano
Da "Attila Kinali" att...@kinali.ch
A tim...@t
6 days run of a modified 5065'B' against GPS.
Adrian
Am 08.06.2018 um 14:05 schrieb tim...@timeok.it:
> Here a ten days simultaneously run of the A and B version compared with my
HP Z3816A GPSDO.
> Luciano
>
>
> Da "time-nuts" time-nuts-boun...@fe
her people could carry out the same tests in the medium and long term Adev
stability.
Luciano
www.timeok.it
Da "Bob kb8tq" kb...@n1k.org
A "Luciano Paramithiotti" tim...@timeok.it,"Discussion of precise time and
frequency measurement" time-nuts@febo.com
C
Hi,
I have four EROS 5MHz oscillator brand new. The external connections are via
an octal connector.
On the top there are coarse and fine tuning trim.
Does anyone have the pin connection and technical data?
Thank you
Luciano
___
Hi Attila,
I am doing the long therm stability test on a couple of HP5065, one original
A type, the second B or "super" compared with my best long therm stability, a
GPSDO HPz3816A.
This test will be 30 days long. It is a second test, with a second couple of
HP5065A/B, to verify the
stability and not the short term stability of the Super
version I agree it is improved..
Luciano
Da "Bob kb8tq" kb...@n1k.org
A "Luciano Paramithiotti" tim...@timeok.it,"Discussion of precise time and
frequency measurement" time-nuts@febo.com
Cc
Data
Hi,
It has become a colossus.
And market competition?
Luciano.
www.timeok.it
Da "time-nuts" time-nuts-boun...@febo.com
A "Discussion of precise time and frequency measurement" time-nuts@febo.com
Cc
Data Fri, 27 Oct 2017 20:14:01 -0400
Oggetto Re: [time-nuts]
Corby,
thanks for the information.
I'm definitely interested in the short therm ADEV but especially for Tau
from 1 day and over to test high stability standard over the time.
I will have further tests.
Cheers,
Luciano
Da "time-nuts" time-nuts-boun...@febo.com
A
Very interesting news.
It would be nice to be able to set the RS232 port to work with the TICC in
real time.
Luciano
www.timeok.it
Da "time-nuts" time-nuts-boun...@febo.com
A "Discussion of precise time and frequency measurement" time-nuts@febo.com
Cc
Data Tue, 2 Jan
tim...@timeok.it
www.timeok.it
Da "time-nuts" time-nuts-boun...@febo.com
A "Discussion of precise time and frequency measurement" time-nuts@febo.com
Cc
Data Wed, 3 Jan 2018 22:15:23 -0800
Oggetto [time-nuts] Anyone have a working HP-113AR/BR Clock?
I'd
Hi Corby,
I did several tests to verify the system noise floor using the same source
for both input channels. I have seen that the result varies a lot as the
difference in time between the two channels varies.
Moreover, if I do two successive tests without changing the parameters and
Perrier pse can you give your email to have a direct contact?
Luciano
tim...@timeok.it
Da "time-nuts" time-nuts-boun...@febo.com
A "time-nuts@febo.com" time-nuts@febo.com
Cc
Data Wed, 28 Feb 2018 02:51:48 + (UTC)
Oggetto [time-nuts] HP 107BR FS
22 matches
Mail list logo