Hi,
C field will not get you on frequency with what you read right now, are you
sure you are on the right peak?
Bert Kehren
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
Hi,
let me start out with a disclaimer, I have sold several HP 5061A through a
friend on ebay including the two recent HP 5062C's, the reason I do not do
it direct is, he does it full time and he has the ability to get them
packed professional. We have had no complaints all where tested and
Bert-
I would be willing to take a chance on a used tube if the price was
right.
Please keep me in mind as I have been looking for a used Cs tube.
-Brian, WA1ZMS
Forest, VA
On Feb 27, 2010, at 6:21 AM, ewkeh...@aol.com wrote:
Hi,
let me start out with a disclaimer, I have sold several HP
PM
To: J. L. Trantham; time-nuts@febo.com
Subject: Re: [time-nuts] 5061a now look at wrong freq A1 fault
the problem was in the syinthesizer board A1 , the xtal oscillator
12.63 was to much aging and was at the limit of pll , now I fixed this
board , now the 12.63 signal is clear
and frequency measurement
Betreff: Re: [time-nuts] 5061a now look at wrong freq A1 fault
I think the best policy re: initial setup of the 5061A is to follow the
manual. There are clear instructions on how to set the beam current and
second harmonic indications and tune the OCXO to find the central
'
time-nuts@febo.com
Sent: Saturday, February 27, 2010 12:07 AM
Subject: Re: [time-nuts] 5061a now look at wrong freq A1 fault
I fully agree to John's instructions. TvB should have the manual on his web
site. If peeking is correct, check for phase alignement as well. Did you
replace the capacitor