When manually entering coordinates to the Tbolt, using either Tboltmon
or Lady Heather, is the altitude value to be entered as MSL or as GPS?
The Trimble docs don't seem to indicate which value is used.
Based on the surveys I've done with the Motorola receivers, at my
location there appears
Let the TBolt do its autosurvey and see the difference... then you can
correct with a more precise set of coordinates. Or, is the autosurvey not
available in the TBolt? OK, Let me take a look at the manual...
On Sun, Feb 12, 2012 at 4:42 PM, John Ackermann N8UR j...@febo.com wrote:
When
] Entering Altitude for Thunderbolt
Let the TBolt do its autosurvey
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
the 48 hour survey.
Dave
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of Azelio Boriani
Sent: 12 February 2012 16:31
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Entering Altitude
antenna
signal there will be almost no sudden phase jumps as sat change.
ws
*
[time-nuts] Entering Altitude for Thunderbolt
John Ackermann N8UR jra at febo.com
That's an experiment I should run, but the current experiment requires
setting the Tbolt to the same coordinates
*
[time-nuts] Entering Altitude for Thunderbolt
John Ackermann N8UR jra at febo.com
That's an experiment I should run, but the current experiment requires
setting the Tbolt to the same coordinates as the other units, so I'm just
looking to do that. :-)
On Feb 12, 2012, at 12:42 PM, David C
[mailto:time-nuts-boun...@febo.com] On
Behalf Of Azelio Boriani
Sent: 12 February 2012 16:31
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Entering Altitude for Thunderbolt
Let the TBolt do its autosurvey
