Re: [time-nuts] FS700 Loran-C Frequency Standard Schematics
Now there's an interesting part number for a scanner:-) I've had similar problems in the past trying to stitch schematics, I did find a program some years ago that would half work, usually matching up the ends of the lines ok, but then leaving quite significant distortion in that region. I know others have claimed some success so thought perhaps it was just me, but perhaps not after all. These days I use a Kodak feed through unit that will take up to A3, and with sheets even larger than that it generally manages in two or more A3 parts with a generous overlap which isn't too bad, so would be quite happy to do the scanning here if I had access to a copy. I'd be more than happy to pay the postage charges both ways if anyone could make a copy available for scanning, and happy to share the results, but must admit if it were my copy I'd probably be pretty reluctant to trust it to the post. Regards Nigel GM8PZR In a message dated 20/04/2014 20:09:08 GMT Daylight Time, mag...@rubidium.dyndns.org writes: Nigel, On 04/20/2014 03:43 PM, gandal...@aol.com wrote: Hi Magnus Thanks for the reply. I was aware of that, and the $35 previously mentioned in the time-nuts archives for an original manual from SRS doesn't sound too bad, but they don't seem to list the FS700 these days and for some other kit they now have the manuals priced at $100 each. I was hoping to find a less expensive option:-) Let's see if there is a scanner available to handle the fold-outs. My HP5370C scanner (read that number once more!) doesn't do that size and I have not figured out a good way to have schematics partially scanned and joined together. The one program, hugin, that seems to join photos doesn't work with scanned schematics. Cheers, Magnus ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] FS700 Loran-C Frequency Standard Schematics
They are found in the printed manual. Speaking of which, I need a antenna setup for mine. Cheers, Magnus On 04/20/2014 12:03 AM, gandal...@aol.com wrote: I have a manual for the Stanford Research FS700 but it's lacking the schematics, and so far I've been unable to find them. I anyone has copies they'd be willing to share, or could point me in the right direction, that would be much appreciated. Regards Nigel GM8PZR ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] FS700 Loran-C Frequency Standard Schematics
Hi Magnus Thanks for the reply. I was aware of that, and the $35 previously mentioned in the time-nuts archives for an original manual from SRS doesn't sound too bad, but they don't seem to list the FS700 these days and for some other kit they now have the manuals priced at $100 each. I was hoping to find a less expensive option:-) Regards Nigel GM8PZR In a message dated 20/04/2014 14:16:49 GMT Daylight Time, mag...@rubidium.dyndns.org writes: They are found in the printed manual. Speaking of which, I need a antenna setup for mine. Cheers, Magnus On 04/20/2014 12:03 AM, gandal...@aol.com wrote: I have a manual for the Stanford Research FS700 but it's lacking the schematics, and so far I've been unable to find them. I anyone has copies they'd be willing to share, or could point me in the right direction, that would be much appreciated. Regards Nigel GM8PZR ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] FS700 Loran-C Frequency Standard Schematics
Nigel, On 04/20/2014 03:43 PM, gandal...@aol.com wrote: Hi Magnus Thanks for the reply. I was aware of that, and the $35 previously mentioned in the time-nuts archives for an original manual from SRS doesn't sound too bad, but they don't seem to list the FS700 these days and for some other kit they now have the manuals priced at $100 each. I was hoping to find a less expensive option:-) Let's see if there is a scanner available to handle the fold-outs. My HP5370C scanner (read that number once more!) doesn't do that size and I have not figured out a good way to have schematics partially scanned and joined together. The one program, hugin, that seems to join photos doesn't work with scanned schematics. Cheers, Magnus ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] FS700 Loran-C Frequency Standard Schematics
My Fujitsu can duplex scan up to something like 40 x 12 inches. -Chuck Harris Magnus Danielson wrote: Nigel, On 04/20/2014 03:43 PM, gandal...@aol.com wrote: Hi Magnus Thanks for the reply. I was aware of that, and the $35 previously mentioned in the time-nuts archives for an original manual from SRS doesn't sound too bad, but they don't seem to list the FS700 these days and for some other kit they now have the manuals priced at $100 each. I was hoping to find a less expensive option:-) Let's see if there is a scanner available to handle the fold-outs. My HP5370C scanner (read that number once more!) doesn't do that size and I have not figured out a good way to have schematics partially scanned and joined together. The one program, hugin, that seems to join photos doesn't work with scanned schematics. Cheers, Magnus ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] FS700 Loran-C Frequency Standard Schematics
For large copies I have taken them to the county clerk's office or a surveyor's office. They can make a copy for you at a reasonable price or free most of the time. Take them donuts!73, Bill, WA2DVU Cape May -Original Message- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Magnus Danielson Sent: Sunday, April 20, 2014 2:29 PM To: time-nuts@febo.com Subject: Re: [time-nuts] FS700 Loran-C Frequency Standard Schematics Nigel, On 04/20/2014 03:43 PM, gandal...@aol.com wrote: Hi Magnus Thanks for the reply. I was aware of that, and the $35 previously mentioned in the time-nuts archives for an original manual from SRS doesn't sound too bad, but they don't seem to list the FS700 these days and for some other kit they now have the manuals priced at $100 each. I was hoping to find a less expensive option:-) Let's see if there is a scanner available to handle the fold-outs. My HP5370C scanner (read that number once more!) doesn't do that size and I have not figured out a good way to have schematics partially scanned and joined together. The one program, hugin, that seems to join photos doesn't work with scanned schematics. Cheers, Magnus ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
[time-nuts] FS700 Loran-C Frequency Standard Schematics
I have a manual for the Stanford Research FS700 but it's lacking the schematics, and so far I've been unable to find them. I anyone has copies they'd be willing to share, or could point me in the right direction, that would be much appreciated. Regards Nigel GM8PZR ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.