...@earthlink.net
To:time-nuts@febo.com
Subject: Re: [time-nuts] Fwd: CGSIC: FW: New NANU 2014090
Message-ID:5490c7d8.9060...@earthlink.net
Content-Type: text/plain; charset=UTF-8; format=flowed
On 12/16/14, 3:36 PM, Magnus Danielson wrote:
Paul,
That is indeed the question. Considering that the signal
On 12/17/14, 5:20 AM, Dan Kemppainen wrote:
Not sure if this is quite the right platform, but for someone wanting to
experiment it may be worth a look...
https://www.kickstarter.com/projects/swiftnav/piksi-the-rtk-gps-receiver
http://www.swiftnav.com/piksi.html
from that page:
3-bit, 16.368
Fellow time-nuts,
We have now 15 L2C signals and 8 L5 signals in the air.
An L2C only receiver start to become useful in it's own right.
L1 C/A, L2C and L5 would allow for tripple frequency receiver. Things is
starting to be interesting, if you have the receiver for it. With a
Magnus exciting. Now which ublox receiver is that on ebay? :-)
Regards
Paul
WB8TSL
On Tue, Dec 16, 2014 at 4:09 PM, Magnus Danielson
mag...@rubidium.dyndns.org wrote:
Fellow time-nuts,
We have now 15 L2C signals and 8 L5 signals in the air.
An L2C only receiver start to become useful in
Paul,
That is indeed the question. Considering that the signal is better
supported, I hope the light goes on somewhere. The signals is all
1,023 Mchips/s, just a thad different. Should be possible to pull off if
people want to do dual frequency without going full bandwidth.
Then again, if
On 12/16/14, 3:36 PM, Magnus Danielson wrote:
Paul,
That is indeed the question. Considering that the signal is better
supported, I hope the light goes on somewhere. The signals is all
1,023 Mchips/s, just a thad different. Should be possible to pull off if
people want to do dual frequency
On Wed, Dec 17, 2014 at 12:01 AM, Jim Lux jim...@earthlink.net wrote:
On 12/16/14, 3:36 PM, Magnus Danielson wrote:
what about one of the software receivers? I would think that making L2 and
L5 filters isn't that tough, so all you need is the back end.
I'm pretty sure GNSS-SDRLIB supports
HI
On Dec 16, 2014, at 8:14 PM, Gregory Maxwell gmaxw...@gmail.com wrote:
On Wed, Dec 17, 2014 at 12:01 AM, Jim Lux jim...@earthlink.net wrote:
On 12/16/14, 3:36 PM, Magnus Danielson wrote:
what about one of the software receivers? I would think that making L2 and
L5 filters isn't that
