Good one George.
It is the obsessive compulsive time correcting disorder that we all have!
Raj
VU2ZAP
>The big question is "why am I doing this"? Just because I can.
>
>George
>K2CM
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, g
that to be here in about 2 weeks.
The big question is "why am I doing this"? Just because I can.
George
K2CM
From: Bill Hawkins
To: 'Discussion of precise time and frequency measurement'
Sent: Wednesday, March 14, 2012 12:27 AM
Subject:
Hi George, welcome aboard. If you are a beginner about time and frequency
don't forget to get and read what was pointed out to be our introduction to
the subject http://gpstime.com/files/tow-time2011.pdf written by Tom Clark
and Rick Hambly.
On Wed, Mar 14, 2012 at 5:27 AM, Bill Hawkins wrote:
>
Hi, George
Is there anything that distinguishes you from the thousand others on this
list?
What is there about time that interests you? That makes you a nut?
Do you lean towards theory or the soldering iron? Is bit twiddling your
interest?
Assuming that you have followed human nature and collec
Just a note to let you know that George, K2CM, has joined the list.
George
K2CM, Vestal, NY
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Found this on the main website page:
[1]http://www.downeastmicrowave.com/A32.htm
Regards,
Bill Powell af4jg
Original Message
Subject: Re: [time-nuts] New to the list...Hello from Melbourne
Date: Sun, 31 Aug 2008 10:12:38 -0700 (GMT-07:00)
From
ment
>Subject: Re: [time-nuts] New to the list...Hello from Melbourne
>
>Hello Clint,
>
>Welcome to the group.
>
>For the accurate (stabilized) LO for the 8 GHZ receiver,
>
>consider the new product offering from www.downeastmicrowave.com
>
>They are offering a syn
More on building low noise 8.4 GHz synthesizers:
http://ipnpr.jpl.nasa.gov/progress_report/42-166/166A.pdf
You can probably put one together using eval boards from the mfrs for <$500
(1 board for the VCO/PLL, 1 for the loop filter, 1 for the DDS)
___
From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of Clint Jeffrey - VK3CSJ
[EMAIL PROTECTED]
Sent: Saturday, August 30, 2008 10:52 PM
To: time-nuts@febo.com
Subject: [time-nuts] New to the list...Hello from Melbourne
As for me now, there are a couple
Clint Jeffrey - VK3CSJ wrote:
> As for me now, there are a couple of interests, I'm wanting to put together a
> receiver operating at 8.4GHz where the PLO is referenced (10MHz) from a OCXO
> which in turn is getting it's reference from a GPS Rx with a 10KHz output,
> all for the sake of increas
Hello Clint,
Welcome to the group.
For the accurate (stabilized) LO for the 8 GHZ receiver,
consider the new product offering from www.downeastmicrowave.com
They are offering a synthesized LO that uses a 10 MHz external reference.
Also consider thewww.n5ac.com product offering for a US
Hi everyone,
Not sure how many folks there are associated with the
"time-nuts" list but hi and hello from Melbourne Australia, I've just signed up
a couple of days ago and have already been seeing a degree of activityall
very good.
I don't know 'how qualified' I am to consi
12 matches
Mail list logo