PROTECTED] On Behalf Of Mark Stephens
Sent: Thursday, May 29, 2008 9:24 PM
To: time-nuts@febo.com
Subject: Re: [time-nuts] OT: Anyone programmed HP 59306A
relay actuator (orother old device)?
Doctor,
I have the full manual for HP 59306A, please contact me
offline if you would like me
Daun Yeagley wrote:
Hi David
Don't worry about all the level stuff. That's internal to the box (59306).
The only thing you need to worry about is how to generate the proper
commands on the bus for your particular H/W-S/W combination.
But looking at the example program, one sends
* ? to
of precise time and
frequency measurement
Subject: Re: [time-nuts] OT: Anyone programmed HP 59306A
relay actuator (orother old device)?
Daun Yeagley wrote:
Hi David
Don't worry about all the level stuff. That's internal to
the box (59306).
The only thing you need to worry about
-
From: Dr. David Kirkby [mailto:[EMAIL PROTECTED]
Sent: Saturday, May 24, 2008 10:13 AM
To: [EMAIL PROTECTED]; Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] OT: Anyone programmed HP 59306A relay actuator
(orother old device)?
Daun Yeagley wrote:
Hi David
Didier Juges wrote:
Remember these units don't have uC, so any signal that would normally depend
on some timing must be generated externally, i.e. come from the bus. I
suspect the box might need some signals that other equipment (uC equipped)
may not absolutely require. However, this being a
