Thank you very much Mark!
I have to remark, that your program is really universal and outstanding!
I am using LH since I have Trimble Thunderbolt from the group buy long
years now.
Regards
Arnold
Am 01.03.2018 um 00:32 schrieb Mark Sims:
Lady Heather v6 Beta also has PRS10 support. You
Lady Heather v6 Beta also has PRS10 support. You can get the Windows .EXE
from here:
http://www.eevblog.com/forum/metrology/lady-heather-v6-beta-for-windows-exe/
You will need to have Heather v5 installed (from ke5fx.com) and replace the
current v5 .EXE with the new one.
Start Heather with
Hi Mike,
very interesting what you are saying, I remember long months ago that I
prepared the RbO for the calibration with the 1 PPS from Thunderbolt.
Then I stored it away until today ...
Perhaps this I should look after, but today it is already too late ...
Would be great, if my nice box
Hi Arnold,
It looks like your oscillator is locked to the rubidium and it is configured
to lock to an incoming PPS sig, but the TT value is null, so maybe you have
forgotten to connect the GPS? Or maybe to the wrong connector? Check the PPS in
to see if you have a good signal.
I don’t know
As I have the impression that my very small data pdf was not
transferred, I add therefore this explanatory data again but in open
document format odt with 10 kB. Hopefully this will pass now.
Arnold
Am 28.02.2018 um 22:14 schrieb Arnold Tibus:
Hello Michael and Tom, thanks for the quick
Hello Michael and Tom, thanks for the quick reaction!
Of course I did already think that the rubidium cell doesn't work any
more, but then I was astonished after more than 1 hour running how
precise the output frequency is and I could not see a drift beyond the
natural noise/ fluctuations
Hello Arnold,
A frequency offset of a part in 10E-11 still sounds healthy to me. I wonder
whether there is some kind of electronic problem?
I have run 40 or so PRs10s and the lamp is the usual bit that dies.
If you hook up a computer to the RS232 port, there are lots of diagnostics
available.
with the Rubidium Section.
I hope that helps.
Cheer;
Thomas Knox
From: time-nuts <time-nuts-boun...@febo.com> on behalf of Arnold Tibus
<arnold.ti...@gmx.de>
Sent: Wednesday, February 28, 2018 11:47 AM
To: time-nuts@febo.com
Subject: [time-nuts] PRS10
Hello fellow timenuts,
for my old PRS10 I need some information and help with technical
informations.
I have this item bought quite some years ago and I have manufactured an
interface cable with the special connector last year. Did work fine.
Taken out of storage I do get anymore the lock and