: [time-nuts] PTS 3200 remote programming
Hi Alan,
thanks for answer. Yes I have the manual, but the latches on my pts
not are as are showed in the user manual. Maybe my unit it is a
different version or release, or have some customozation from the pts
guys.
In myunit, I tested the SO-2005
, March 02, 2013 12:37 AM
Subject: Re: [time-nuts] PTS 3200 remote programming
Hi Alan,
thanks for answer. Yes I have the manual, but the latches on my pts
not are as are showed in the user manual. Maybe my unit it is a
different version or release, or have some customozation from the pts
guys
Hi,
I'm traying to use to program the bcd interface of a PTS 3200.
My truble us tha the 100Mhz decade 8 value bit is ignored by the PTS,
then if I send 800Mhz to the PTS dont get output, and if send 900Mhz
then I get 100Mhz.
I checked the unit and the hardware looks OK. And my code is working
switches.mabe a wire off. Does the 800Mhz front panel switch setting
work correctly ??
Alan
G3NYK
- Original Message -
From: Iban Cardona icard...@gmail.com
To: time-nuts@febo.com
Sent: Friday, March 01, 2013 6:42 PM
Subject: [time-nuts] PTS 3200 remote programming
Hi,
I'm traying
One of the PTSs I have had a defective chip in one of the decade units. To
confirm I swapped two of them and the problem followed. Same with a analog
issue
On Mar 1, 2013 10:51 AM, Iban Cardona icard...@gmail.com wrote:
Hi,
I'm traying to use to program the bcd interface of a PTS 3200.
My
Hi Iban
I'm not sure that the programming data for the versions having decade
switches will apply to PTS3200, but the good news is I have a copy of the 3200
manual and will email that direct:-)
Regards
Nigel
GM8PZR
In a message dated 01/03/2013 18:51:24 GMT Standard Time,
I looked at a copy of the 3200 manual I found a while ago. I used to
have a bunch of PTS stuff on my web pages but was asked by the company
to take it down. I think KO4BB manual pages have the same issue. Do you
have the manual?
It doesn't look like there is anything unexpected in the
Cardona icard...@gmail.com
To: time-nuts@febo.com
Sent: Friday, March 01, 2013 6:42 PM
Subject: [time-nuts] PTS 3200 remote programming
Hi,
I'm traying to use to program the bcd interface of a PTS 3200.
My truble us tha the 100Mhz decade 8 value bit is ignored by the PTS,
then if I send
switches.mabe a wire off. Does the 800Mhz front panel switch setting
work correctly ??
Alan
G3NYK
- Original Message - From: Iban Cardonaicard...@gmail.com
To:time-nuts@febo.com
Sent: Friday, March 01, 2013 6:42 PM
Subject: [time-nuts] PTS 3200 remote programming
Hi,
I'm traying