These expensive and exotic connectors are nice but are over kill for most
projects which live their entire lives on a lab bench and never fly to Mars
or even Low Earth Orbit.
I found out about "GX" style connectors a while back. They are multi-pin
circular connectors with screw down locking
>
> They will definitely not work loose.
ODU or Glennair (I forget which) has a ratcheting lock ring on some of
their connectors. It has asymmetric ramps on the ratchet cam that tighten
the lock ring under vibration.
-ch
73 de AI6KG
On Fri, Jun 23, 2017 at 9:01 PM, Charles Steinmetz
Working in motorsport, we used the Deutsch Autosport series. They're based
on military connectors but are lighter and possibly cheaper. Still far from
cheap, but high density, high reliability and MUCH easier to assemble than
Lemos. Usually crimped pins and raychem heatshrink cable entry.
Hi
If you have a phase noise under vibration requirement, you do *not* want to use
the “D connector” setup. Go with an SMA ….
Bob
> On Jun 24, 2017, at 7:54 PM, Didier Juges wrote:
>
> I have been forced to use micro-D by a customer on a military power supply,
> not even
I have been forced to use micro-D by a customer on a military power supply,
not even space rated, it was well over $100 each in 50 piece quantity (I
think it was a 25 pin).
However, unless they are mistreated (which is easy for the reason you
listed), they seem reliable. I do not believe we have
This is what we use with good results
Bert Kehren
In a message dated 6/24/2017 12:03:09 A.M. Eastern Daylight Time,
csteinm...@yandex.com writes:
Someone previously mentioned "aviation" style connectors (which many
will recognize as mobile microphone connectors) (see graphic below). I
Someone previously mentioned "aviation" style connectors (which many
will recognize as mobile microphone connectors) (see graphic below). I
switched to these for power and other connections long ago, and have
been extremely happy with them.
One nice thing about them (IMO) is that all chassis
I have a design rule that I've used for decades: "If it fits, it works, or it
does no harm."
-Original Message-
Why so many connecter types? So you don't cross stuff up.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go
On 6/22/17 4:22 PM, William H. Fite wrote:
A good friend of mine, sadly of blessed memory, was a lead engineer for
Grumman on the comm systems of the lunar lander. He spoke of small
space-rated multi-pin connectors that cost upward of $500 each.
The Micro-D is widely used in spaceflight, and
Hi,
Either that, or make protection schemes to save the day.
If you can't come up with a protection scheme that works, then you need
to move on to another connector. A crow-bar circuit and a diode for
reverse-bias and a fuse could probably form sufficient protection.
There is plenty of
I've been caught by that one.
Someone used 240V IEC inlets as convenient 10A DC inputs to an oven in an
ion trap. Fiddling around in the back of the racks, I made the inevitable
mistake and Poof! there went $1000 worth of isotopically separated Yb 171.
A few years later, someone else did the same
Hi
… but not a Cannon connector. If you get those inserts along with a few signal
leads, they
are up into the $50 to $200 a pair range. They also don’t do terribly well in
vibration.
Bob
> On Jun 22, 2017, at 8:34 PM, Arnold Tibus wrote:
>
> Bob,
>
> look to this
Hi:
A few tips on Power Poles.
1. Super Flex wire works very well. It's typically made of of 44 AWG strands. For PCB mounting a single strand can be
used for mechanical rigidity.
2. There's no rule that all the current has to be carried by a single terminal
The M455-1 power supply uses
Bob,
look to this spec. data from Amphenol found @ Mouser as example:
Current Rating:
power Contacts: 55 Amperes (per contact)
Signal Contacts: 5 Amperes (per contact)
Contact Resistance:
Power Contacts: .25 milliohms max
Signal Contacts: 20 milliohms max
Insulation Resistance: 5000 Megohms
A good friend of mine, sadly of blessed memory, was a lead engineer for
Grumman on the comm systems of the lunar lander. He spoke of small
space-rated multi-pin connectors that cost upward of $500 each.
On Thursday, June 22, 2017, Arnold Tibus wrote:
>
> Hello,
>
> I can
I hear what you are saying and basically agree with you.
In my experience however phrases such as "25 pair amphenol connector" and "2
pin Deutsch connector" have a commonly accepted meaning in the industries I
have worked in over the years. Putting these terms into Google brings up the
Hi
You can get and use PP’s at 30 to 50A in a 12V circuit without frying them or
the cable they are
attached to. Doing the same with a “Cannon” connector is not at all easy ….You
can also bump up
to the larger PP’s and get into a couple of hundred amps.
Bob
> On Jun 22, 2017, at 6:54 PM,
Hello,
I can second Magnus and want to throw in some more details.
Cannon, Deutsch, Bendix, Souriau, Matrix, Amphenol, etc. etc. are (big)
companies manufacturing all kind of connectors and are n o t connector
type designations! Important are the type numbers of the manufacturer or
higher
Keep in mind that there are a large variety of power pole connectors. I first
encountered them in the cables and connectors used to recharge electric
forklifts. Plenty big and can handle plenty of power.
> On Jun 22, 2017, at 16:06, Chris Albertson wrote:
>
> I
On Thu, Jun 22, 2017 at 1:06 PM, Chris Albertson
wrote:
>
> A really dumb idea was this guy, I heard this story secondhand. He used
> A/C extension cords for speaker cables because they work well for that
> purpose, but then someone plugged a speaker into a 120vac
I think they call these "16mm aviation plugs" in the CNC machine tool
world. They are common for connecting servo or stepper motors to their
controllers.
they have any number of poles from 2 to 6 or more and screw rings that
secure them. Usually really good quality even from Chinese eBay
There seem to be many variations in colloquial naming in different regions and
industries. Part of the reason I prefer to deal with local vendors with a
parts counter is to be able to more or less confirm that connectors match /
mate properly prior to purchasing them.
All the best.
Mark
Hi,
The second connect has been called "Cannon" and XLR, and is not
generally recogniced as XLR, which is the product range name.
Naming of the first connector as "Cannon" is at least for me and many
others confusing. This is a good example how vendor name for a connector
type is not a good
Sorry if I have caused any un due confusion thru my perhaps incorrect use of
the terms "cannon" and "XLR."
The green connector with 4 separate female contacts is what I perhaps in
correctly referred to as a "cannon" connector. The silver connector with 3
separate female contacts was what I
24 matches
Mail list logo