I'll have to look at the specs to see current
draw.
Bob
From: Paul
To: Discussion of precise time and frequency measurement
Sent: Wednesday, July 16, 2014 2:33 PM
Subject: Re: [time-nuts] Synergy-GPS SSR-6tru problems
On Wed, Jul 16, 2014 at 2:
On Wed, Jul 16, 2014 at 2:54 PM, Bob Stewart wrote:
> I fooled around with PUBX 41, and can't get the board to respond.
I had some problems but that's because they sent the wrong
configuration (a 16062133G). What's the part number? Assuming it
hasn't changed a TRu is 16062152G.
> I don't have t
wasted
all this time for nothing.
Bob
From: Dennis Ferguson
To: Discussion of precise time and frequency measurement
Cc: Bob Stewart
Sent: Tuesday, July 15, 2014 11:46 PM
Subject: Re: [time-nuts] Synergy-GPS SSR-6tru problems
On 15 Jul, 2014, at 16:32 , Bob Stewart wrote:
> I do n
Bob
From: Rex
To: Discussion of precise time and frequency measurement
Sent: Wednesday, July 16, 2014 3:45 AM
Subject: Re: [time-nuts] Synergy-GPS SSR-6tru problems
I think your story is rather incomplete. You never (to my deduction)
told us what you are plug
I think your story is rather incomplete. You never (to my deduction)
told us what you are plugging this into. You mention a GPSDO so I guess
that is where it is plugged while not doing what you want, but you never
mention what that GPSDO might be.
You blew off Art Sepin's reply as not relevant
On 15 Jul, 2014, at 16:32 , Bob Stewart wrote:
> I do not know what the problem is. The UT+ works (with the appropriate
> software). The SSR-6tru is deaf using all the software I have available to
> me. I am at my wits end, and I have nothing else that I can think of to try.
I've got severa
o.com [mailto:time-nuts-boun...@febo.com] On Behalf
Of Mike S
Sent: Tuesday, July 15, 2014 4:41 PM
To: time-nuts@febo.com
Subject: Re: [time-nuts] Synergy-GPS SSR-6tru problems
On 7/15/2014 6:58 PM, Art Sepin wrote:
> A firmware update including the 8 channel @@Ea message (like the UT+)
> will b
On 7/15/2014 6:58 PM, Art Sepin wrote:
A firmware update including the 8 channel @@Ea message (like the UT+)
will be available in the coming months. A 6 channel @@Ba command is
also being added so that users of legacy HP timing products that used
the old VP Oncore will have an up-grade path. Hope
o had experienced
problems.
Bob
From: Art Sepin
To: Bob Stewart ; Discussion of precise time and frequency
measurement
Sent: Tuesday, July 15, 2014 5:58 PM
Subject: RE: [time-nuts] Synergy-GPS SSR-6tru problems
Bob,
One of the most obvious things is that the UT+ u
have
an up-grade path. Hope this helps.
Art Sepin
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf
Of Bob Stewart
Sent: Tuesday, July 15, 2014 2:37 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] Synergy-GPS
I got one of these recently, along with the adapter board. This is the ublox
only version, and I am using u-center version 8.11 software. I am unable to
make it work properly. The NMEA section happily sends out messages, but I
cannot get anything else to work. e.g. it ignores the commands to
11 matches
Mail list logo
