There is a way to slide the board in that clears the standoffs; almost
impossible to describe so I should make a video of it one of these days!
In general, you slide the board in with a very shallow angle of
attack and do an overshoot-and-reverse. I'm sure that's an unusable
description,
John Ackermann N8UR wrote:
There is a way to slide the board in that clears the standoffs; almost
impossible to describe so I should make a video of it one of these days!
In general, you slide the board in with a very shallow angle of
attack and do an overshoot-and-reverse. I'm sure that's
Hello,
I am placing my TADD-2 into the TAPR TADD enclosure, and I need to know the
size / threads of the fixed mounting posts.
Anyone know?
Thanks,
Dave
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
Dave, the standoffs are threaded for a 4-40 screw, but I'll tell you a
secret -- if you use the nuts and washers on the BNC connectors, the
board is held very securely without any need for the mounting screws;
I've frankly never bothered with them.
John
Dave hartzell said the following
Thanks John.
I picked some screws up at the local hardware store. I see what you mean
about the BNC mounting...
FYI, I had to bend the vertical nut ears a bit to be able to get the board
in, and screwed in.
I'm probably going to be operating open lid for a while just to see the
LED status.