https://www.youtube.com/watch?v=oMcRUqhrYNY
Right at the end of this teardown (50:50 minutes) Mike reaches the Vectron
oscillator module and opens that up too.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
The nearest data I can find is Vectron C4550 datasheet which is not
very helpful.
Does anyone have the spec. for the 63.8976 ocxo?
thanks
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
Hi,
is there anybody in the group who could give me informations of the
Vectron Crystal Oscillator Model 217-5604?
I got two of this type with 9.995985 MHz and 9.99597 MHz and I think
these would be good for mixing 10 MHz units down to 4 kHz Audio for
measurement purpose.
Can dim. is 2 x 2 x 3
); SAEximRunCond expanded to false
Errors-To: [EMAIL PROTECTED] RETRY
Hi All
I have a Vectron 10 MHz ovened oscillator, model CO-206B59VW, with output
via SMA and 7 solder pins for power and control lines.
It's only been connected previously for basic supply, and I can probably
trace that
); SAEximRunCond expanded to false
Errors-To: [EMAIL PROTECTED] RETRY
On Fri, 7 Sep 2007 11:18:58 EDT, [EMAIL PROTECTED] wrote:
I have a Vectron 10 MHz ovened oscillator, model CO-206B59VW, with output
via SMA and 7 solder pins for power and control lines.
It's only been connected previously
Dear All,
Can someone provide me with the pin-out of a Vectron 244-4799-2
oscillator? It has a SMA output and a DB-9 connector for power supply.
Other data (stability, supply voltage) is welcome as well!
Thank you, best regards, Jeroen
--
Ing. Jeroen Bastemeijer
Delft University of
Hello all,
Same question for the Vectron 224-8647-2 100MHz.
Henk ten Pierick
On Jun 19, 2007, at 12:43, Jeroen Bastemeijer wrote:
Dear All,
Can someone provide me with the pin-out of a Vectron 244-4799-2
oscillator? It has a SMA output and a DB-9 connector for power supply.
Other data
: Tuesday, June 19, 2007 9:34 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Vectron oscillator data
Hello all,
Same question for the Vectron 224-8647-2 100MHz.
Henk ten Pierick
On Jun 19, 2007, at 12:43, Jeroen Bastemeijer wrote:
Dear All,
Can someone