Thanks
On Sun, Jul 20, 2014 at 8:11 AM, Oz-in-DFW wrote:
> On 7/19/2014 3:45 PM, paul swed wrote:
> > Attilla I did look at some of the documents. But none showed practical HF
> > class injection locking. Say as an example a 6 MHz xtal to a 1 or 2 MHz
> > reference.
> > It maybe as easy as a si
On 7/19/2014 3:45 PM, paul swed wrote:
> Attilla I did look at some of the documents. But none showed practical HF
> class injection locking. Say as an example a 6 MHz xtal to a 1 or 2 MHz
> reference.
> It maybe as easy as a single transistor in the oscillators ground lead.
Paul, everything I seen
HI
As long as you have a really poor crystal oscillator (wide band loop) they are
quite easy to lock. If you have a high performance crystal oscillator (high Q /
narrow band loop) they are relatively difficult to lock. If you are trying to
*guarantee* a lock bandwidth and *guarantee* a level of
if you have enough buffering -- look for now noise amplifiers, which
have low h12 [= "backward gain " ] a quartz oscillator will not lock so
easy
On 7/19/2014 5:24 PM, Attila Kinali wrote:
On Sat, 19 Jul 2014 16:45:14 -0400
paul swed wrote:
Attilla I did look at some of the documents. B
On Sat, 19 Jul 2014 16:45:14 -0400
paul swed wrote:
> Attilla I did look at some of the documents. But none showed practical HF
> class injection locking. Say as an example a 6 MHz xtal to a 1 or 2 MHz
> reference.
> It maybe as easy as a single transistor in the oscillators ground lead.
> Always
Attilla I did look at some of the documents. But none showed practical HF
class injection locking. Say as an example a 6 MHz xtal to a 1 or 2 MHz
reference.
It maybe as easy as a single transistor in the oscillators ground lead.
Always on till a brief pulse from the 1 or 2 MHz ref cuts it off. I th
On Tue, 24 Jun 2014 21:18:20 +0200
Francesco Messineo wrote:
> what would be the best method to try injection locking a butler common
> base crystal oscillator (see figure in
> http://www.eska.dk/oscillator_data.htm for schematic)?
> Any comment about close-in phase noise performance when adding
Dear Francesco,
Connect the two oscillators to a mixer, which will provide a path into
the clock under test and provide a beat note for monitoring. Adjust the
EFC and observe the locking width, when the beat note is missing.
Cheers,
Magnus
On 06/24/2014 09:18 PM, Francesco Messineo wrote:
H
Hi all,
what would be the best method to try injection locking a butler common
base crystal oscillator (see figure in
http://www.eska.dk/oscillator_data.htm for schematic)?
Any comment about close-in phase noise performance when adding
injection locking to such oscillators?
Thanks in advance for a