On 2014-12-14 10:29, Francesco Messineo wrote:
On Sun, Dec 14, 2014 at 6:12 PM, Bob Camp kb...@n1k.org wrote:
that's not meant as a time nut stratum 1.
It's just a free gps module I would like to recycle as a needed
stratum 1 server for a small network.
Of course if I can find informations on
On Mon, Dec 15, 2014 at 9:09 AM, Brian Inglis
brian.ing...@systematicsw.ab.ca wrote:
On 2014-12-14 10:29, Francesco Messineo wrote:
The A1029, which is a newer model, has indeed a PPS output and I've
been able to find a datasheet for it but the pinout isn't anything
like the A1025.
I planned
I reply to myself,
On Mon, Dec 15, 2014 at 2:41 PM, Francesco Messineo
francesco.messi...@gmail.com wrote:
I've found a couple of articles saying the A1025 indeed has PPS output
as I suspected. However, none of them reports any hint about the
pinout of this module.
The module itself is
Hi all,
I've just found an old anti-theft system (I think) for cars . It has a tyco
electronics A1205 gps module.
I've been unable to find any information about this module, other than it
should be a 3.3V 12 channel GPS module with serial NMEA output.
Does anyone have any informations about it?
Hi
On Dec 14, 2014, at 6:03 AM, Francesco Messineo
francesco.messi...@gmail.com wrote:
Hi all,
I've just found an old anti-theft system (I think) for cars . It has a tyco
electronics A1205 gps module.
I've been unable to find any information about this module, other than it
should be a
Strongly agree with Bob. The neo 6 on ebay is a good example silly stupid
cheap!
Regards
Paul
WB8TSL
On Sun, Dec 14, 2014 at 9:46 AM, Bob Camp kb...@n1k.org wrote:
Hi
On Dec 14, 2014, at 6:03 AM, Francesco Messineo
francesco.messi...@gmail.com wrote:
Hi all,
I've just found an old
Should have added. You get great documentation also and everything is well
established and most likely will handle some 1024 week rollovers.
The old stuff is quite annoying with respect to this.
Regards
Paul
WB8TSL
On Sun, Dec 14, 2014 at 11:05 AM, paul swed paulsw...@gmail.com wrote:
Strongly
Hi
Maybe a bit more on a timing receiver:
GPS is (for some reason) better known for navigation than for timing. In
navigation the receiver moves around a lot. In most timing applications, the
receiver is stationary. When moving, the mathematical solution to the “where am
I / what time is it”
On Sun, Dec 14, 2014 at 3:46 PM, Bob Camp kb...@n1k.org wrote:
Hi
On Dec 14, 2014, at 6:03 AM, Francesco Messineo
francesco.messi...@gmail.com wrote:
Hi all,
I've just found an old anti-theft system (I think) for cars . It has a tyco
electronics A1205 gps module.
I've been unable
Hi
On Dec 14, 2014, at 12:01 PM, Francesco Messineo
francesco.messi...@gmail.com wrote:
On Sun, Dec 14, 2014 at 3:46 PM, Bob Camp kb...@n1k.org wrote:
Hi
On Dec 14, 2014, at 6:03 AM, Francesco Messineo
francesco.messi...@gmail.com wrote:
Hi all,
I've just found an old anti-theft
On Sun, Dec 14, 2014 at 6:12 PM, Bob Camp kb...@n1k.org wrote:
It’s unlikely that a consumer targeted GPS has a good dedicated PPS out of
it. Finding one that will do position hold is even less likely. You can get
modules that will do both for $20 and have a documented interface.
that's
kb...@n1k.org said:
My guess is that there is no PPS out of the device. It would be very unusual
if there was. Finding the NEMA output pin should be possible with an
oscilloscope. At that point, a simple serial connection to the server is
about all you need. Bring up the NEMA driver and it is
12 matches
Mail list logo