Hi
How close to frequency is the 10 MHz oscillator?
Is the crystal a fundamental?
The degree you can injection lock an oscillator is (as Danna notes) a bit
difficult
to predict. Your chances improve if the oscillator is low(er) Q. They also
improve
if it is tuned very close to frequency. Pas
Hello Thomas,
What you ask is possible, but only if the native crystal oscillator
frequency is close enough to the signal from the GPSDO. You
may have to tune the oscillator yourself to get it to lock, and you
may or may not find that the result is predictable from day to day.
This would depend o
Hello.
I have a device that consists of a PLL, that has as its reference a
10MHz crystal.
What I would like to do, is to inject this with 10MHz from a GPSDO,
when that is available, and to use the internal crystal when that is
not available.
Would it be feasible to just connect it to one leg of t
My copy of this antenna has the correct threads, just as a data point.
Serial number 1718010926. No date code that I can see, but it was
delivered two weeks ago.
Attached is the spectrum of the antenna looking at the sky, taken with an
RTL-SDR dongle. There is some response at L5, but it's on th
Hi
There’s a lot more to an OCXO than how the power changes. Power changing
quickly *might* mean that the
temperature at the crystal is more stable (heat is applied as soon as the
temperature changes a very small
amount). The crystal in one uint might be tightly coupled to the oven and in
ano
Just been sent information on this technology by TI. Is it of any use/interest
to TimeNuts?
https://training.ti.com/introducing-tis-bulk-acoustic-wave-baw-resonator-technology
___
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to