Re: [time-nuts] HP 106B on Ebay

https://www.ebay.com/itm/HP-Agilent-106B-Quartz-Oscillator-Frequency-Standard/303514587258 > On Mar 20, 2020, at 1:20 PM, Tim Lister wrote: > > On Fri, Mar 20, 2020 at 9:59 AM Perry Sandeen via

Re: [time-nuts] Looking for info/help on TruePosition GPSDO behavior

Not seeing any replies, I started up one of my TrueTime units here. I’m not seeing that behavior. (Last 96 min from an 18 hour run below.) I see my software version is slightly different (12.1.1) but the GPS version is the same. I have other units (TrueTime and UCCM variants) with the same

Re: [time-nuts] U-Blox GPS Module At All-Electronics Corp

Looking closer at the picture provided at that link, it appears that pin 3 (TIMEPULSE) is broken out to a resistor and LED (toward the bottom right mounting hole). Probably still best to ask though. > On Sep 21, 2019, at 6:20 PM, Hal Murray wrote: > > > j...@westmorelandengineering.com said:

Re: [time-nuts] Lucent RFTGM-II-Rb (KS-24019 L108) Standalone

Lucent RFTGm-II-Rb (KS-24019 L108) Standalone Notes After further investigation, I found that the pinout in the ‘Lucent RFTGm-II-XO Notes’ pdf from John Warner @ Warner Labs is correct. And after sifting through lots of messages and archives, I found one message from Guido Kueppers from 11 Feb

[time-nuts] Lucent RFTGM-II-Rb (KS-24019 L108) Standalone

To help keep me occupied over the holidays, I’ve dusted off a Lucent RFTGm-II-Rb unit to see if I can make it behave as a standalone device. It would be easier with the mating L109 XO unit, but unfortunately I don’t have one. I’ve done quite a bit of digging over the last week or so but have