Before I got my multi-band splitter/amp I was using a HP-58517A 8 channel unit.
It worked reasonably well with GLONASS and BEIDOU L1. GLONASS signal was a
bit degraded and you would lose a few satellites. I could even track GPS L2
with an Ashtech Z12, but the L2 carrier phase / pseudorange
martin.fl...@compdecon.org; Discussion of precise time and frequency
measurement
Subject: Re: [time-nuts] Connector help?
Hi
Yes I know, this is beating a dead horse …..
Since the HP splitter will knock out everything that is not right on top of
GPS, are you
sure you want to go that route? Yes it d
2019 3:52 PM
To: martin.fl...@compdecon.org; Discussion of precise time and frequency
measurement
Subject: Re: [time-nuts] Connector help?
It is an SMC connector. Hard to find and expensive, but worth it to insure
that the DC power to the splitter doesn't get accidentally hooked to a signal
message From: Martin Flynn
Date: 1/27/19 15:17 (GMT-06:00) To:
time-nuts@lists.febo.com Subject: [time-nuts] Connector help?
Planning deployment of an HP 58516A GPS 1x4 antenna splitter with the
external power option (option 05Q) at our makerspace.
Anyone know what the mating DC
Hi
Yes I know, this is beating a dead horse …..
Since the HP splitter will knock out everything that is not right on top of
GPS, are you
sure you want to go that route? Yes it does depend a bit on the antenna. If
it’s one of
the telecom / narrowband gizmos then the splitter will not have much
Planning deployment of an HP 58516A GPS 1x4 antenna splitter with the
external power option (option 05Q) at our makerspace.
Anyone know what the mating DC connector is?
martin
___
time-nuts mailing list -- time-nuts@lists.febo.com
To
