Hi Chris --
Two possibilities:
1. Make sure you have TimeLab set for the correct mode (timestamp vs
time interval), for two channels, and for the right scaling factor (for
timestamps, scale by 1). Any of those can cause 1e0-type results.
2. If the two channels have timestamps that are within
Chris
I don't have any of that kit yet but it seems to me that the two units have
locked to each other somehow, a bit like the question I raised a while ago
about crystals locking to each other.
Just a pure guess though.
John
___
time-nuts mailing
Hi
You have three inputs to the TICC:
1) The “frequency standard” input that delivers 10 MHz to the device.
2) The (likely pps) to channel A
3) the (likely also pps) to channel B
The device runs a continuous time count based on the frequency standard input.
Each edge it sees on channel A
I'm looking for a splitter to allow three or four GPSDO's to share my
roof-mounted Lucent PCTEL KS24019L112C 26db GPS twist antenna.
I understand from scanning past threads that inexpensive splitters by
companies like Mini-Circuits often turn up on eBay, but I'm having
trouble narrowing down
Lady Heather's TICC parser does not expect alternating ABAB readings and
handles the ABAB vs ABBA situation properly.
___
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
On 4/29/20 6:01 PM, Bob kb8tq wrote:
Here’s a few:
Bob, thanks very much for the suggestions.
Five of the seven splitters in your list appear to offer a total of two
output ports. What I'm looking for is one that will accommodate
(specifically) three or four ports.
Of the remaining two on
Hi
Here’s a few:
