Hi,
On 08/22/2018 12:01 AM, Dana Whitlow wrote:
> I have Wolaver's book, and it mostly seems pretty readable. Wolaver also
> describes
> a technique for extending the linear phase range of the classic "digital
> phase/freq" detector
> to several cycles, not just the usual one-cycle range.
Yes.
Hi
> On Aug 20, 2018, at 5:46 AM, Nicolas Braud-Santoni
> wrote:
>
> On Mon, Aug 20, 2018 at 01:15:10AM +0200, Attila Kinali wrote:
>> On Sun, 19 Aug 2018 23:26:03 +0200
>> Nicolas Braud-Santoni wrote:
>>
Yeah. u-blox isn't as nice as they used to be to small customers :-(
>>>
>>> Ah,
Hi
> On Aug 19, 2018, at 5:26 PM, Nicolas Braud-Santoni
> wrote:
>
> On Sat, Aug 18, 2018 at 08:25:11PM +0200, Attila Kinali wrote:
>> On Thu, 16 Aug 2018 17:45:30 +0200
>> Nicolas Braud-Santoni wrote:
>>
>>> The main issue I'm running into is that most timing GPS modules will
>>> happily
On Sat, Aug 18, 2018 at 10:13:49PM +0200, Magnus Danielson wrote:
> >> 2) replace the internal oscillator with one phase locked to your OCXO.
> >> [...]
> >
> > If you go this route, the close in phase noise of your signal needs to be
> > in the
> > “pretty good TCXO” range. There are indeed
On Sat, Aug 18, 2018 at 08:25:11PM +0200, Attila Kinali wrote:
> On Thu, 16 Aug 2018 17:45:30 +0200
> Nicolas Braud-Santoni wrote:
>
> > The main issue I'm running into is that most timing GPS modules will
> > happily give you carrier phase measurements... for their internal
> > oscillator, and
Hi,
On 08/18/2018 10:01 PM, Bob kb8tq wrote:
> Hi
>
>
>
>> On Aug 18, 2018, at 2:25 PM, Attila Kinali wrote:
>>
>> On Thu, 16 Aug 2018 17:45:30 +0200
>> Nicolas Braud-Santoni wrote:
>>
>>> The main issue I'm running into is that most timing GPS modules will
>>> happily give you carrier phase
Hi
> On Aug 18, 2018, at 2:25 PM, Attila Kinali wrote:
>
> On Thu, 16 Aug 2018 17:45:30 +0200
> Nicolas Braud-Santoni wrote:
>
>> The main issue I'm running into is that most timing GPS modules will
>> happily give you carrier phase measurements... for their internal
>> oscillator, and the
Hi,
I've been working on a self-designed GPSDO (on and off for the last couple
of years now), and while I got it working decently well, I've been thinking
about using GPS carrier phase measurements for better accuracy.
The main issue I'm running into is that most timing GPS modules will
happily
