Hi There are a few folks around who have done boards. The circuit is simple enough that point to point wiring on perf board works pretty well. ( = mixer plus opamp after it).
Bob > On Sep 5, 2019, at 12:19 PM, Peter Vince <petervince1...@gmail.com> wrote: > > On Thu, 5 Sep 2019 at 19:00, Bob kb8tq <kb...@n1k.org> wrote: > >> ...If you indeed want to do a quick and simple measurement that goes into >> 1 Hz ( or possibly less) >> the answer is to use a mixer based setup. A single mixer setup ( half of a >> DMTD) will do a much >> better job than a counter based approach. Cost wise it is not very >> expensive at all … >> >> Bob >> > > I wonder if one of you clever people could design a circuit, and get kits > produced by TAPR ? > > Peter > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.