Re: [time-nuts] Efratom 105243-003 10MHz OCXO

2018-03-02 Thread Bob kb8tq
Hi

Pretty good bet that if it’s a 100K termination it’s a square wave output.
The highest impedance you typically see on a sine wave is about 1K ohms. 
Even that is pretty rare on OCXO’s. 

Bob

> On Mar 2, 2018, at 2:07 PM, David C. Partridge 
>  wrote:
> 
> Does anyone know the specs for the 10MHz output of this?   I'm looking at a
> board using it that is terminating it with a 100kOhm resistor to ground.
> 
> Yeah I know, probe it with a scope - the catch is that the equipment is
> currently well disassembled so I can't do that so easily ...
> 
> Is the output of this beast 0-5V square wave?
> 
> Dave
> 
> ___
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


[time-nuts] Efratom 105243-003 10MHz OCXO

2018-03-02 Thread David C. Partridge
Does anyone know the specs for the 10MHz output of this?   I'm looking at a
board using it that is terminating it with a 100kOhm resistor to ground.

Yeah I know, probe it with a scope - the catch is that the equipment is
currently well disassembled so I can't do that so easily ...

Is the output of this beast 0-5V square wave?

Dave

___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.