Re: [time-nuts] Lady Heather for Z3801A (and other devices)

[Bill Riches]

Thank you Mark,  Spend time with your family this Thanksgiving.  We will all 
appreciate it when it does arrive.

73,

Bill, WA2DVU

-Original Message-
From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Mark Sims
Sent: Wednesday, November 23, 2016 11:14 AM
To: time-nuts@febo.com
Subject: [time-nuts] Lady Heather for Z3801A (and other devices)

I had hoped to get the 5.0 release out last weekend but got distracted...   
this weekend for sure... maybe...  perhaps...
___
time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to 
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

[time-nuts] Lady Heather for Z3801A (and other devices)

[Mark Sims]

Besides the Trimble devices, the other devices include the Z3801,  Z3811/Z3812 
(aka Lucent KS2),  Trimble/Symmetricom "UCCM" GPSDOs,  Oscilloquartz STAR-4 
GPSDO,  NEC GPSDO,  and NMEA, Ublox, Motorola, Venus, SIRF,  NVS, etc GPS 
receivers,  and GPSD.  It is probably compatible with the Z3805/Z3816/HP53xxx 
devices but has not been tested with them.

 In most cases it can auto-detect the device type and serial port configuration.

The code is compatible with Windoze, Linux, and macOS.   Runs well on the 
Raspberry PI...
 
---

> Would have been great to have the TBolt and Z3801 working.
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Re: [time-nuts] Lady Heather for Z3801A (and other devices)

[paul swed]

Oh there is hope then.
That would be a good way to finish the year.
Thanks everyone.
Paul
WB8TSL

On Wed, Nov 23, 2016 at 11:14 AM, Mark Sims  wrote:

> I had hoped to get the 5.0 release out last weekend but got distracted...
>  this weekend for sure... maybe...  perhaps...
> ___
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> and follow the instructions there.
>
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Re: [time-nuts] Lady Heather for Z3801A (and other devices)

[Bob Camp]

Hi

Code as in firmware inside the Z3801 (the question I answered) or as in LH
(the question I didn’t answer).

Bob

> On Nov 23, 2016, at 11:31 AM, paul swed  wrote:
> 
> Bob,
> Thank you for the insight. When I was reading the thread about 2 months ago
> I was thinking this was official. (As far as it gets) OK can that thought.
> Would have been great to have the TBolt and Z3801 working.
> Regards
> Paul
> WB8TSL
> 
> On Wed, Nov 23, 2016 at 10:25 AM, Bob Camp  wrote:
> 
>> Hi
>> 
>> None of the code for any of these devices was ever “released” by it’s
>> owners /
>> creators. It appears that in many cases, the code in parts currently
>> shipping is *very*
>> similar to the code from decades ago …thus their reluctance to release the
>> old code.
>> 
>> Oddly enough some of the code is indeed out there on the net by virtue of
>> various
>> people doing things to pull it out of the memory chips it’s stored in. A
>> review of the
>> Time Nut archives has a number of bread crumbs that lead one off to
>> various likely
>> locations to find it. I suspect that the big guys are not to excited about
>> the code dumps
>> so being really public about it may not be a real good idea.
>> 
>> Bob
>> 
>>> On Nov 23, 2016, at 9:50 AM, paul swed  wrote:
>>> 
>>> Curious if the code for the z3801 was ever released?
>>> Thanks
>>> Paul
>>> WB8TSL
>>> 
>>> On Mon, Sep 19, 2016 at 8:08 AM, Bill Riches 
>>> wrote:
>>> 
 Hi Mark,
 
 Will it work with Z3811 (KS24361)
 
 73,
 
 Bill, WA2DVU
 Cape May
 
 
 ___
 time-nuts mailing list -- time-nuts@febo.com
 To unsubscribe, go to https://www.febo.com/cgi-bin/
 mailman/listinfo/time-nuts
 and follow the instructions there.
 
>>> ___
>>> time-nuts mailing list -- time-nuts@febo.com
>>> To unsubscribe, go to https://www.febo.com/cgi-bin/
>> mailman/listinfo/time-nuts
>>> and follow the instructions there.
>> 
>> ___
>> time-nuts mailing list -- time-nuts@febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/
>> mailman/listinfo/time-nuts
>> and follow the instructions there.
>> 
> ___
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Re: [time-nuts] Lady Heather for Z3801A (and other devices)

[Bill Riches]

Hi Paul,

Our LH Guru is working on an update for 3801 and 3811.  It will do all sort of 
things and even cook dinner.  He has not said when it will be available but it 
will be soon.

73,

Bill, WA2DVU
Cape May

-Original Message-
From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of paul swed
Sent: Wednesday, November 23, 2016 9:50 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Lady Heather for Z3801A (and other devices)

Curious if the code for the z3801 was ever released?
Thanks
Paul
WB8TSL

On Mon, Sep 19, 2016 at 8:08 AM, Bill Riches <bill.ric...@verizon.net>
wrote:

> Hi Mark,
>
> Will it work with Z3811 (KS24361)
>
> 73,
>
> Bill, WA2DVU
> Cape May
>
>
> ___
> time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to 
> https://www.febo.com/cgi-bin/ mailman/listinfo/time-nuts and follow 
> the instructions there.
>
___
time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to 
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

[time-nuts] Lady Heather for Z3801A (and other devices)

[Mark Sims]

I had hoped to get the 5.0 release out last weekend but got distracted...   
this weekend for sure... maybe...  perhaps...
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Re: [time-nuts] Lady Heather for Z3801A (and other devices)

[Bob Camp]

Hi

None of the code for any of these devices was ever “released” by it’s owners / 
creators. It appears that in many cases, the code in parts currently shipping 
is *very*
similar to the code from decades ago …thus their reluctance to release the old 
code. 

Oddly enough some of the code is indeed out there on the net by virtue of 
various
people doing things to pull it out of the memory chips it’s stored in. A review 
of the
Time Nut archives has a number of bread crumbs that lead one off to various 
likely
locations to find it. I suspect that the big guys are not to excited about the 
code dumps
so being really public about it may not be a real good idea.

Bob

> On Nov 23, 2016, at 9:50 AM, paul swed  wrote:
> 
> Curious if the code for the z3801 was ever released?
> Thanks
> Paul
> WB8TSL
> 
> On Mon, Sep 19, 2016 at 8:08 AM, Bill Riches 
> wrote:
> 
>> Hi Mark,
>> 
>> Will it work with Z3811 (KS24361)
>> 
>> 73,
>> 
>> Bill, WA2DVU
>> Cape May
>> 
>> 
>> ___
>> time-nuts mailing list -- time-nuts@febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/
>> mailman/listinfo/time-nuts
>> and follow the instructions there.
>> 
> ___
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Re: [time-nuts] Lady Heather for Z3801A (and other devices)

[paul swed]

Curious if the code for the z3801 was ever released?
Thanks
Paul
WB8TSL

On Mon, Sep 19, 2016 at 8:08 AM, Bill Riches 
wrote:

> Hi Mark,
>
> Will it work with Z3811 (KS24361)
>
> 73,
>
> Bill, WA2DVU
> Cape May
>
>
> ___
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> and follow the instructions there.
>
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Re: [time-nuts] Lady Heather for Z3801A (and other devices)

[Bill Riches]

Hi Mark,

Will it work with Z3811 (KS24361)

73,

Bill, WA2DVU
Cape May


___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

[time-nuts] Lady Heather for Z3801A (and other devices)

[Mark Sims]

Yes,  the next release (should be out in a couple of weeks) supports numerous 
receiver types.  Included are:

Native binary formats:
Trimble TSIP devices - (Thunderbolts, Resolution T family, various telecom 
GPSDOs like the NTWB, NTPX, etc)
Datum Starloc II (ugh!)
Ublox
Motorola (6, 8, 12 channel)
Sirf
Venus
Jupiter
NVS

SCPI devices (tested):
Z3801A
Z3812A (and related Lucent GPSDO's)
UCCM devices (Trimble and Symmetricom telecom GPSDO's - SCPI like)
SCPI mode for Trimble telecom GPSDO's like the NTBW, NTPX, etc

SCPI devices (untested... if you have one and can compile a Linux program email 
me...)
HP 53
Z3805, Z3810. Z3816, etc
Lucent KS

The following devices in a monitoring mode:
NMEA receivers
GPSD (a universal GPS device interface for Linux)
Receiver-less, operating system clock driven mode.

The next release has support for OS/X in it... if you can compile a C program 
for OS/X and are familiar with or would like to be familiar with  X11 / XQuartz 
under OS/X) email me, I've lost contact with my OS/X guy).  Also it works great 
with the Raspberry PI's...

-

> Does Lady Heather software support the HP Z3801A GPSDO? I recently read 
that it supports "most GPS receivers" but I have not heard that it 
supports the Z3801A. It would be great if it can do this...
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.