I know this should be as simple as reading the manual however...
I am using Tera Term with a PC laptop connected from serial port to serial port: VT100 9600 Baud Data: 8 bit Parity: None Stop: 1 bit Flow control: none The cable is a DB9 to DB9 "Straight Through" Serial Cable of 6.6 ft length (New pre-made cable). Dip Switch 4 which allows manual setting of the Netclock 2 is enabled (on). It updates the Tera Term window every second in Format 1 (which is the same as the rotary switch setting) with its current Day, Date, Month, Year as if the (T)ime command is being issued again and again. It ignores any and all commands found in the manual. I'm at a loss. Donald R. Resor Jr. T. W. & T. C. Svc. Co. http://hammondorganservice.com Hammond USA warranty service "Most people don't have a sense of humor. They think they do, but they don't." --Jonathan Winters _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.