Re: [time-nuts] PICTIC II Parts - SOIC to PDIP Adaptor
Yes, they look like they should work. I have a few of item #380243138677 that I bought a while back. As long as C9 is low enough or is bent out of the way they should work. Item #330436763629 is interesting. The trace lengths will be shorter than the above adapters. Item # 250661866947 is possible, but a little ugly (SOIC - Wide DIP - Narrow DIP). Item # 320558409884 is a little different, but it should work. I haven't seen the last three, I'm only going by the pictures. Note that some include pins and some don't. Of course, I'm not associated with any of the sellers. Ed Tom Clifton wrote: Would something like eBay 180460919851 be a suitable adaptor? The description says that it takes .1 header pins on .3 centers 'ready for socket insertion'. I'm sure that there are other places (Sparkfun) that sell similar adaptors for those that have an aversion to on-line auction sites for one reason or another. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II Parts - SOIC to PDIP Adaptor
stanley_reyno...@yahoo.com said: No, the ebay item 180460919851 looks correct, data sheet for 74ac175 has the same pin out for all packages I agree that that one should work. Anybody interested in this mess who hasn't yet looked at it should check out the back half of that ebay page in case it goes away. It's got good pictures. The catch is that there aren't through-holes for half of the pins so you have to chop off the pins or bend them over to fit the non-hole pads. I can't find the part that I thought my turned sideways was referring to. Apologies for the clutter. This one is turned sideways, but it's also too wide: 18046092 That may be what I was referring to, but I thought I was smart enough to ignore it because it was too wide (which was already mentioned?) rather than clutter up the group with a redundant won't-work comment. Here is another potentially interesting part: 330436763629 It's SSOP on one side and SOIC on the other. The pads on the SOIC side look too short to my eye. If anybody tries it, please let me/us know. -- These are my opinions, not necessarily my employer's. I hate spam. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II Parts - SOIC to PDIP Adaptor
http://www.futurlec.com/SMD_Adapters.shtml Joe Gray W5JG On Fri, Jul 9, 2010 at 9:06 PM, Tom Clifton kc0...@yahoo.com wrote: Would something like eBay 180460919851 be a suitable adaptor? The description says that it takes .1 header pins on .3 centers 'ready for socket insertion'. I'm sure that there are other places (Sparkfun) that sell similar adaptors for those that have an aversion to on-line auction sites for one reason or another. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II Parts - SOIC to PDIP Adaptor
Same ebay seller, different layout. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=18046092rvr_id=crlp=1_263602_263622UA=%3F*%3F%3FGUID=7c4b40741290a0b3f8f587f5ff797212itemid=18046092ff4=263602_263622 Joe Gray W5JG On Fri, Jul 9, 2010 at 9:06 PM, Tom Clifton kc0...@yahoo.com wrote: Would something like eBay 180460919851 be a suitable adaptor? The description says that it takes .1 header pins on .3 centers 'ready for socket insertion'. I'm sure that there are other places (Sparkfun) that sell similar adaptors for those that have an aversion to on-line auction sites for one reason or another. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II Parts - SOIC to PDIP Adaptor
The ebay item will fit the .3 inch spacing of the pcb. Looks like the futurlec is .6 inch spacing like many of the other ebay items. Stanley - Original Message From: Joseph Gray jg...@zianet.com To: Discussion of precise time and frequency measurement time-nuts@febo.com Sent: Fri, July 9, 2010 10:44:28 PM Subject: Re: [time-nuts] PICTIC II Parts - SOIC to PDIP Adaptor http://www.futurlec.com/SMD_Adapters.shtml Joe Gray W5JG On Fri, Jul 9, 2010 at 9:06 PM, Tom Clifton kc0...@yahoo.com wrote: Would something like eBay 180460919851 be a suitable adaptor? The description says that it takes .1 header pins on .3 centers 'ready for socket insertion'. I'm sure that there are other places (Sparkfun) that sell similar adaptors for those that have an aversion to on-line auction sites for one reason or another. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II Parts - SOIC to PDIP Adaptor
From ad : 0.700 accross: Not DIP socket insertable for solderless breadboarding custom pcb only Stanley - Original Message From: Joseph Gray jg...@zianet.com To: Discussion of precise time and frequency measurement time-nuts@febo.com Sent: Fri, July 9, 2010 10:53:25 PM Subject: Re: [time-nuts] PICTIC II Parts - SOIC to PDIP Adaptor Same ebay seller, different layout. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=18046092rvr_id=crlp=1_263602_263622UA=%3F*%3F%3FGUID=7c4b40741290a0b3f8f587f5ff797212itemid=18046092ff4=263602_263622 Joe Gray W5JG On Fri, Jul 9, 2010 at 9:06 PM, Tom Clifton kc0...@yahoo.com wrote: Would something like eBay 180460919851 be a suitable adaptor? The description says that it takes .1 header pins on .3 centers 'ready for socket insertion'. I'm sure that there are other places (Sparkfun) that sell similar adaptors for those that have an aversion to on-line auction sites for one reason or another. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II Parts - SOIC to PDIP Adaptor
stanley_reyno...@yahoo.com said: The ebay item will fit the .3 inch spacing of the pcb. Check the pinout. It's turned sideways. -- These are my opinions, not necessarily my employer's. I hate spam. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
Re: [time-nuts] PICTIC II Parts - SOIC to PDIP Adaptor
No, the ebay item 180460919851 looks correct, data sheet for 74ac175 has the same pin out for all packages. Attached a picture pin 1 to pin 1 no crossed pins. Stanley - Original Message From: Hal Murray hmur...@megapathdsl.net To: Discussion of precise time and frequency measurement time-nuts@febo.com Sent: Fri, July 9, 2010 11:09:18 PM Subject: Re: [time-nuts] PICTIC II Parts - SOIC to PDIP Adaptor stanley_reyno...@yahoo.com said: The ebay item will fit the .3 inch spacing of the pcb. Check the pinout. It's turned sideways. -- These are my opinions, not necessarily my employer's. I hate spam. ___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. attachment: smt18.jpg___ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
