I have a TrueTime XL-DC that has an IRIG B plug-in that uses that same
Tri-Lobe BNC connector. I'm planing on changing these out to normal
BNC connectors due to the rarity and expense of trying to use them
as-is!
Steve
___
time-nuts mailing
Boy I almost remember what the XL was.
They also make insulated shield bncs or as easily an audio xlr if you need
balanced.
Regards
Paul
On Sun, Feb 10, 2013 at 7:59 PM, st...@pacair.com wrote:
I have a TrueTime XL-DC that has an IRIG B plug-in that uses that same
Tri-Lobe BNC connector. I'm
...@hotmail.com
To: Time-Nuts time-nuts@febo.com
Sent: Friday, February 8, 2013 4:08:28 PM
Subject: Re: [time-nuts] truetime 820-350 display
Hi Tammy;
Here is a link to the operation and service manual on Symmetricoms site:
www.symmetricom.com/link.cfm?lid=5283
Best Wishes;
Thomas Knox
:45
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] truetime 820-350 display
Yes that was the way they used to send differential data most likely a
timecode signal, but also most likely not IRIG it would not have ever needed
a triax feed. Triax was quite expensive
Hi Tammy;
Here is a link to the operation and service manual on Symmetricoms site:
www.symmetricom.com/link.cfm?lid=5283
Best Wishes;
Thomas Knox
4475 Whitney Place
Boulder Colorado 80305
1-303-554-0307
Date: Fri, 8 Feb 2013 15:35:56 -0700
From: tammy-li...@wiztech.biz
To:
Hi Tammy
I see that smetricom has a manual for some other version of remote display.
But thats about it.
Regards
Paul.
On Fri, Feb 8, 2013 at 5:35 PM, Tammy A. Wisdom tammy-li...@wiztech.bizwrote:
Hi All,
I ended up with some trutime 820-350 displays and I am trying to find out
anything
Any idea what the triax connector is for?
--Tammy
- Original Message -
From: Tom Knox act...@hotmail.com
To: Time-Nuts time-nuts@febo.com
Sent: Friday, February 8, 2013 4:08:28 PM
Subject: Re: [time-nuts] truetime 820-350 display
Hi Tammy;
Here is a link to the operation