Unfortunately I have never worked with moteworks
and T1 (T1 = tinyos 1.X ?)
I work with tinyos-2.1.1 and the standard i2c component of atmle128L (iris)
which uses the under laying twi (two wire interface)
of the atmel128L chip but it seems that with this
special co2-sensor (with long reaction
Hi Sebastian,
The I2CMasterPacketC in tinyos 2.1.1 had a bunch of bugs, try the SVN
version from here:
http://code.google.com/p/tinyos-main/
It should be enough to replace the i2c folder.
Andris
On Thu, Nov 24, 2011 at 11:57 AM, Sebastian Dölker
sebastiandoel...@gmx.de wrote:
Unfortunately I
I have recently installed Tinyos-2.0.2 with the support for IRIS motes, I can
compile the blink application on mica2 but when I try to compile on iris (
make iris) I have got the following problem:
mkdir -p build/iris
compiling BlinkAppC to a iris binary
ncc -o build/iris/main.exe -Os -Wall
which simulator can be used for simulating routing protocol in tinyos
2.1.1nbsp;
___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
pls , could any one tell me which routing protocol is built-in for tinyos 2.1.1
and where the source .nc file is located???___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
Sorry I was imprecise.. I started with tinyos 2.1.1
but work with a check out from the googlecode repository.
(Downloaded in august 11)
Anyway i downloaded the newest source today..
but the problem seems to continue!
Because the I2C-Funktions returned EBUSY I thought,
that there was a
Hi,
Can you find out what's in the state variable when the i2c stops working?
By the way: when we had problems with the i2c drivers, I modified the
hpls to print every low level communication:
http://dl.dropbox.com/u/363226/munka/I2CDriver.zip
Don't forget to change the Clk/Data pins in the
Yes, TOS 1.x, which underlies Moteworks. Although I just noticed
that the last release of T1 has a hardware impl for I2C in mica128.
Here is what I used, including my small patch to I2CM.nc:
http://www.etantdonnes.com/Motes/T1_I2C.zip
But I imagine that it will be fairly pointless to try to
Hello everyone,
I am trying to design an home automation system with telosb nodes, right
now I have only two nodes, one node is plugged into my laptop as a sink for
data reception using BaseStation and the other is equipped with a light
sensor and use Oscilloscope to transfer data to the
Good afternoon everyone,
I use a telosb node equipped with a light sensor, I have succeeded in
receiving data from the node on my laptop, but for me the data are talking
non sense because I always get a value next to 4000 (when I convert the
readings to a decimal value) even if it is dark in my
Hi,
I am using TinyOS on Atmel Atmega128RFA1 , I am using Phillipp Sommer port
of TinyOS for Atmega128rfa1.
I have been trying to synchronize number of Atmega128RFA1 modules to
accuracy of 25 microsecond using FTSP. I have been able to run FTSP on
these nodes and subsequently synchronize number
Can anyone please let me know how to run the tossim
program? The tossim I am using is of version 1.0. Please let me know the
command
for the same.
Thanks Regards
Ms. Amrita Ghosal
Assistant Professor
Department of Computer Science and Engineering
Dr. B C Roy Engineering College
Jemua
12 matches
Mail list logo