from:"dean"

Dear Sir or Madam:  I am Judge Dean M. Trafelet and your emails are 
erroronesouly and improperly being sent to my email address.  Notice is 
hereby given that you are to immediately remove me from your emailing. DMT

- Original Message - 

From: George Sexton [EMAIL PROTECTED]
To: 'Tomcat Users List' tomcat-user@jakarta.apache.org
Sent: Monday, May 02, 2005 10:08 AM
Subject: RE: filesystem independent tomcat [OT]

You could probably do it, but at the end you wouldn't have a servlet 
engine.

The spec EXPLICITLY states that java.io.tmpdir must be writable. Are you
allowing file uploads? Commons-fileupload uses that area for disk file
upload. Are you creating PDF output? Some packages use  the area for
temporary file space.
George Sexton
MH Software, Inc.
http://www.mhsoftware.com/
Voice: 303 438 9585

-Original Message-
From: sandy kumar [mailto:[EMAIL PROTECTED]
Sent: Friday, April 29, 2005 2:56 AM
To: Tomcat Users List
Subject: filesystem independent tomcat [OT]
Hi,
I am doing some exploratory work on tomcat and was
wondering If anyone has felt the need for tomcat which
can be loaded across the network and doesnt rely on
the underlying filesystem in anyway including the
temporary work directory, logging, catalina_home,
catalina_base etc ?
Is there any such version already out there? If not,
then does it break any servlet/jsp specs ?
Thanks for your replies.
cheers,
sandie
Send instant messages to your online friends
http://uk.messenger.yahoo.com
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: tomcat-user Digest 30 Apr 2005 13:34:46 -0000 Issue 5590

Dear Sir or Madam:  I am Judge Dean M. Trafelet and your emails are
erroronesouly and improperly being sent to my email address.  Notice is
hereby given that you are to immediately remove me from your emailing. DMT
- Original Message - 
From: J. W. Ballantine [EMAIL PROTECTED]
To: tomcat-user@jakarta.apache.org
Cc: [EMAIL PROTECTED]
Sent: Monday, May 02, 2005 10:09 AM
Subject: Re: tomcat-user Digest 30 Apr 2005 13:34:46 - Issue 5590


Thanks for that piece of information, but you missed the part of my 
message
that said it also failed the same way if I just configured for mod_jk.

Here is the tail of the build with:
./configure --with-apxs=/local/APACHE/Apache2/bin/apxs
/bin/bash /local/APACHE/Apache2/build/libtool --silent --mode=compile gcc
-I/local/APACHE/Apache2/include -g -O2 -DUSE_APACHE_MD5 -I ../common -I
/a2/JAVA/java/include -I /a2/JAVA/java/include/unix -DSOLARIS2=8
-D_POSIX_PTHREAD_SEMANTICS -D_REENTRANT -g -O2 -pthreads -DHAVE_APR
-I/a4/APACHE/httpd-2.0.54/srclib/apr/include -g -O2 -g -O2 -pthreads
-DSOLARIS2=8 -D_POSIX_PTHREAD_SEMANTICS -D_REENTRANT -c mod_jk.c
/bin/bash /local/APACHE/Apache2/build/libtool --silent --mode=link gcc
-I/local/APACHE/Apache2/include -g -O2 -DUSE_APACHE_MD5 -I ../common -I
/a2/JAVA/java/include -I /a2/JAVA/java/include/unix -DSOLARIS2=8
-D_POSIX_PTHREAD_SEMANTICS -D_REENTRANT -g -O2 -pthreads -DHAVE_APR
-I/a4/APACHE/httpd-2.0.54/srclib/apr/include -g -O2 -g -O2 -pthreads
-DSOLARIS2=8 -D_POSIX_PTHREAD_SEMANTICS -D_REENTRANT
`/local/APACHE/Apache2/bin/apxs -q LDFLAGS` -o mod_jk.la -module -rpath
/local/APACHE/Apache2/modules -avoid-version mod_jk.lo
../common/jk_ajp12_worker.lo ../common/jk_connect.lo 
../common/jk_msg_buff.lo
../common/jk_util.lo  ../common/jk_ajp13.lo ../common/jk_pool.lo
../common/jk_worker.lo ../common/jk_ajp13_worker.lo 
../common/jk_lb_worker.lo
../common/jk_sockbuf.lo  ../common/jk_map.lo 
../common/jk_uri_worker_map.lo
../common/jk_ajp14.lo ../common/jk_ajp14_worker.lo  ../common/jk_md5.lo
../common/jk_shm.lo   ../common/jk_ajp_common.lo ../common/jk_context.lo
../common/jk_status.lo
/bin/bash /local/APACHE/Apache2/build/libtool --silent --mode=install cp
`pwd`/mod_jk.so
libtool: install: you must specify a destination
Try `libtool --help --mode=install' for more information.
*** Error code 1
make: Fatal error: Command failed for target `mod_jk.so'
Current working directory 
/a4/TOMCAT/jakarta-tomcat-connectors-1.2.11-src/jk/n
ative/apache-2.0
*** Error code 1
make: Fatal error: Command failed for target `all-recursive'


 Message-ID: [EMAIL PROTECTED]
 Date: Fri, 29 Apr 2005 21:00:50 +0200
 From: Mladen Turk [EMAIL PROTECTED]
 MIME-Version: 1.0
 To: Tomcat Users List tomcat-user@jakarta.apache.org
 Subject: Re: mod_jk 1.2.11 build failure on solaris 2.8
 Content-Type: text/plain; charset=ISO-8859-1; format=flowed
 Content-Transfer-Encoding: 7bit
 J. W. Ballantine wrote:
  I'm trying to build mod_jk 1.2.11 on a solaris 2.8
  system and it fails with:
 
 
  The configuration command is:
 
./configure --with-apxs=/local/APACHE/Apache2/bin/apxs --enable-jni
  --with-java-home=/a2/JAVA/java --with-java-platform=2
 
 jni will not work anyhow on any unix system. It can work in theory
 only for WIN32 on Netware, so just use:
 ./configure --with-apxs=/local/APACHE/Apache2/bin/apxs
 Regards,
 Mladen.

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]


-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: Digester / vector usage

Dear Sir or Madam:  I am Judge Dean M. Trafelet.  Your emails are improperly 
being sent to my email address.  Please remove me from you list immediately. 
DMT

- Original Message - 
From: Henrique, Manuel [EMAIL PROTECTED]
To: tomcat-user@jakarta.apache.org
Sent: Monday, May 02, 2005 10:12 AM
Subject: Digester / vector usage

Hello all,
It made now 2 weeks that I have a little issue with the XML parsing. I use
examples founds in the net. My question is very simple, if I have for
example an XML file like that:
catalog library=somewhere
  book
 authorAuthor 1/author
 titleTitle 1/title
  /book
  book
 authorAuthor 2/author
 titleHis One Book/title
  /book
  magazine
 nameMag Title 1/name
 article page=5
headlineSome Headline/headline
 /article
 article page=9
headlineAnother Headline/headline
 /article
  /magazine
  book
 authorAuthor 2/author
 titleHis Other Book/title
  /book
  magazine
 nameMag Title 2/name
 article page=17
headlineSecond Headline/headline
 /article
  /magazine
/catalog
I have the catalog.class:
package com.erdv.logicacmg.control;
import java.util.Vector;
public class Catalog {
  private Vector books;
  private Vector magazines;
  //constructeur de catalog
  public Catalog() {
 books = new Vector();
 magazines = new Vector();
  }
//gestion des livres
  public void addBook(Book newBook) {
 books.addElement(newBook);
  }
  public void setBooks(Vector books){
   this.books = books;
  }
  public Vector getBooks(){
   return books;
  }
  //gestion des magazines
  public void addMagazine(Magazine newMagazine) {
 magazines.addElement(newMagazine);
  }
  public void setMagazines(Vector magazines){
   this.magazines = magazines;
  }
  public Vector getMagazines(){
   return magazines;
  }
}
book class:
package com.erdv.logicacmg.control;
public class Book {
  private String author;
  private String title;
  public Book() {}
  public void setAuthor(String newAuthor) {author = newAuthor;}
  public void setTitle(String newTitle) {title  = newTitle;}
  public String getAuthor(){
   return author;
  }
  public string getTitle(){
   return title;
  }
}
the magazine class:
package com.erdv.logicacmg.control;
import java.util.Vector;
public class Magazine {
  private String name;
  private Vector articles;
  public Magazine() {
 articles = new Vector();
  }
  public void setName(String newName) {name = newName;}
  public String getName(){
   return name;
  }
  public void addArticle(Article a) {
 articles.addElement(a);
  }
  public void setArticles(Vector articles){
   this.articles = articles;
  }
  public Vector getArticles(){
   return articles;
  }

}
and so on...
I have also a digester class that create the rules and parse the file as I
want. All is ok into the log file. It indicates no issue.
Now what I what is to get my values from my java code. I dont know how to
do. I search help with the vector usage but nothing helps me to get my
values.
For example: in a java code how can I get the Headline value for the
magazine called Mag 1 for the article page 5.
I tried in my java code to create a c as new catalog and after? How can I
do. In all examples they uses Vectors but nobody explains how to do after.
What it seems is that everybody talks about parsing, about digester but
nobody gives how to get the wanted value from the XML. Each time I ask to
someone always the same answers digest.parse(), now catch your object 
and
it's finished. Yes, it's exactly what I want but how can I do??

Could somebody help me please?
Regards,
Manuel
PS: I know I am a newbee in Tomcat/Java so no need to mock at me.
This e-mail and any attachment is for authorised use by the intended 
recipient(s) only. It may contain proprietary material, confidential 
information and/or be subject to legal privilege. It should not be copied, 
disclosed to, retained or used by, any other party. If you are not an 
intended recipient then please promptly delete this e-mail and any 
attachment and all copies and inform the sender. Thank you.

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: Apache access log timestamp issue

Dear Sir or Madam:  I am Judge Dean M. Trafelet.  Your emails are improperly 
being sent to my email address.  Please remove me from you list immediately. 
DMT

- Original Message - 
From: Simon Zeng [EMAIL PROTECTED]
To: 'Tomcat Users List' tomcat-user@jakarta.apache.org
Sent: Monday, May 02, 2005 10:18 AM
Subject: Apache access log timestamp issue

Hi all,
I have a question about what timestamp means in access.log files.  It says
it's the time when apache server finish process the request from the 
client
in the online document.  However I found the following entries in the
access.log:

xxx.xxx.xxx.xxx [01/May/2005:11:41:45 -0400] GET ...
xxx.xxx.xxx.xxx [01/May/2005:11:41:52 -0400] POST ...
xxx.xxx.xxx.xxx [01/May/2005:11:41:52 -0400] GET ...
xxx.xxx.xxx.xxx [01/May/2005:11:41:52 -0400] GET /javascript/xxx.js
HTTP/1.1 200 1283 http://www.xxx.com; Mozilla/4.0 (compatible; MSIE 
5.5;
Windows 98; Win 9x 4.90; FunWebProducts; Hotbar 4.6.1)
xxx.xxx.xxx.xxx [01/May/2005:11:37:34 -0400] POST
/bin-java/appletProcessingServlet HTTP/1.1 200 87 - Java1.3.1

The last timestamp is about 4-5 mins later than its previous one.  And
wheneverI find this kind of delay entry, there is a EOFException thrown 
from
the servlet that is trying to read data from the from Applet.

Here is the web server settings.
OS: Windows NT
Apache 2.0.47
mod_jk 1.2.6
Tomcat 4.1
http.conf
Timeout 300
KeepAlive on
KeepAliveTimeout 15
server.xml
Connector className=org.apache.coyote.tomcat4.CoyoteConnector
port=1234 minProcessors=5 maxProcessors=75
protocolHandlerClassName=org.apache.jk.server.JkCoyoteHandler
connectionTimeout=0 acceptCount=10 debug=0/
Server JRE version 1.4.1
Client JRE version 1.3.1
Does anyone know what may cause this problem?
Thanks,
Michael
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: Client Authentication

Dear Sir or Madam:  I am Judge Dean M. Trafelet.  Your emails are improperly
being sent to my email address.  Please remove me from you list immediately.
DMT
- Original Message - 
From: lercoli [EMAIL PROTECTED]
To: Tomcat Users List tomcat-user@jakarta.apache.org
Sent: Monday, May 02, 2005 10:31 AM
Subject: Re: Client Authentication


You should import only client.p12 certificate in IE browser and
when IE asks you in which folder you want to put it select Personal 
Folder.

I hope it helps you.
Luca Ercoli
- Original Message - 
From: Mahesh S Kudva [EMAIL PROTECTED]
To: tomcat-user@jakarta.apache.org
Sent: Monday, May 02, 2005 5:08 PM
Subject: Client Authentication


Dear All
I've been able to setup Tomcat 5.0.30 successfully on port 8443. I want 
to
use client authentication. Hence i've enabled clientAuth=true in
server.xml

Running on Mac OS X these were the commands to create a CA and sign a
certificate using this CA.
Creating a new CA:
1) perl CA.pl -newca
Certificate request using openssl:
1) perl CA.pl -newreq
2) perl CA.pl -sign
3) mv newreq.pem client_req.pem
4) mv newcert.pem client_cert.pem
5) openssl rsa  client_req.pem  client_key.pem
6) openssl pkcs12 -export -in client_cert.pem -inkey client_key.pem -out
   client.p12
For Tomcat using Java keytool to request certificate:
1) openssl x509 -in server_cert.pem -out server.x509
2) openssl pkcs12 -export -in server_cert.pem -inkey server_key.pem
   -out server.p12
3) keytool -genkey -alias meAsClient -storepass changeit
4) keytool -certreq -alias measclient -file client.csr -storepass 
changeit
5) openssl x509   -req -CA demoCA/cacert.pem -CAkey
   demoCA/private/cakey.pem -extensions v3_ca -in client.csr -inform DER
   -out client_cert.x509 -CAcreateserial
6) keytool -import -alias butterflyCA -keystore /Syst.. ..urity/cacerts
   -file ../CA/demoCA/cacert.pem
7) keytool -import -alias measclient -keystore clientstore -trustcacerts
   -file client_cert.x509

Following these commands I dont get any errors. I then import the
cacert.pem, the ROOT CA certificate and the client.p12 and
client_cert.x509 to the browser I.E 6.0. But still there is a popup
requesting for the clients identity and it asks me to select a
certificate and no certificates are displayed.
How can I go about this?
All suggestion and ideas are welcome.

Regards  Thanks

Mahesh S Kudva

---
Robosoft Technologies - Partners in Product Development

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]


-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]


-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: Tomcat j2sdk and image

Dear Sir or Madam:  I am Judge Dean M. Trafelet.  Your emails are improperly
being sent to my email address.  Please remove me from you list immediately.
DMT
- Original Message - 
From: [EMAIL PROTECTED]
To: tomcat-user@jakarta.apache.org
Sent: Monday, May 02, 2005 10:33 AM
Subject: Tomcat j2sdk and image

Hi,
I have a java application who generate image.
On Sun Solaris 8, It works fine with Tomcat-4.0.4 and jdk-1.3.1
It was the same with Tomcat-4.1.18 and jdk-1.4.1
But when I use Tomcat-4.1.30 with jdk-1.4.2 or Tomcat-5.0.28 with
jdk-1.4.1 or jdk-1.4.2, the image make a long time to be generating.
What is the problem ?
Can somebody help me ?
AL
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: Apache access log timestamp issue

This is Judge Dean M. Trafelet.   Your emails are improperly being sent to 
my email address. Remove immediately.  DMT

- Original Message - 
From: Simon Zeng [EMAIL PROTECTED]
To: 'Tomcat Users List' tomcat-user@jakarta.apache.org
Sent: Monday, May 02, 2005 10:18 AM
Subject: Apache access log timestamp issue

Hi all,
I have a question about what timestamp means in access.log files.  It says
it's the time when apache server finish process the request from the 
client
in the online document.  However I found the following entries in the
access.log:

xxx.xxx.xxx.xxx [01/May/2005:11:41:45 -0400] GET ...
xxx.xxx.xxx.xxx [01/May/2005:11:41:52 -0400] POST ...
xxx.xxx.xxx.xxx [01/May/2005:11:41:52 -0400] GET ...
xxx.xxx.xxx.xxx [01/May/2005:11:41:52 -0400] GET /javascript/xxx.js
HTTP/1.1 200 1283 http://www.xxx.com; Mozilla/4.0 (compatible; MSIE 
5.5;
Windows 98; Win 9x 4.90; FunWebProducts; Hotbar 4.6.1)
xxx.xxx.xxx.xxx [01/May/2005:11:37:34 -0400] POST
/bin-java/appletProcessingServlet HTTP/1.1 200 87 - Java1.3.1

The last timestamp is about 4-5 mins later than its previous one.  And
wheneverI find this kind of delay entry, there is a EOFException thrown 
from
the servlet that is trying to read data from the from Applet.

Here is the web server settings.
OS: Windows NT
Apache 2.0.47
mod_jk 1.2.6
Tomcat 4.1
http.conf
Timeout 300
KeepAlive on
KeepAliveTimeout 15
server.xml
Connector className=org.apache.coyote.tomcat4.CoyoteConnector
port=1234 minProcessors=5 maxProcessors=75
protocolHandlerClassName=org.apache.jk.server.JkCoyoteHandler
connectionTimeout=0 acceptCount=10 debug=0/
Server JRE version 1.4.1
Client JRE version 1.3.1
Does anyone know what may cause this problem?
Thanks,
Michael
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: Tomcat j2sdk and image

This is Judge Dean M. Trafelet. Your emails are incorrectly and improperly 
being sent to my email address.  Remove and correct immediately.  DMT

- Original Message - 
From: Dale, Matt [EMAIL PROTECTED]
To: Tomcat Users List tomcat-user@jakarta.apache.org
Sent: Monday, May 02, 2005 10:57 AM
Subject: RE: Tomcat j2sdk and image

I'd be surprised if anyone could with the scant information you have 
provided. You haven't even mentioned the image library that you are using.

I would suggest that you get a profiler or debugger in order to work out 
what your code is doing at the time that it is generating the image and 
which methods are taking all the time.

Ta
Matt
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Sent: 02 May 2005 16:33
To: tomcat-user@jakarta.apache.org
Subject: Tomcat j2sdk and image
Hi,
I have a java application who generate image.
On Sun Solaris 8, It works fine with Tomcat-4.0.4 and jdk-1.3.1
It was the same with Tomcat-4.1.18 and jdk-1.4.1
But when I use Tomcat-4.1.30 with jdk-1.4.2 or Tomcat-5.0.28 with
jdk-1.4.1 or jdk-1.4.2, the image make a long time to be generating.
What is the problem ?
Can somebody help me ?
AL
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: tomcat crashes with no trace?

This is Judge Dean M. Trafelet. Your emails are improperly and incorrectly 
being send to my email address.  Remove my address immediately. DMT

- Original Message - 
From: Guy Katz [EMAIL PROTECTED]
To: Tomcat Users List tomcat-user@jakarta.apache.org
Sent: Monday, May 02, 2005 11:11 AM
Subject: tomcat crashes with no trace?

hi;
i have been getting very wierd behavior from tomcat 5.0.30 lately. i have 3 
applications deployed on it. the OS is freeBSD.
tomcat just crashes with no trace, log or proper shutdown - its like someone 
pulled the power plug.
i am desperate and dont know how to attack this issue.
any suggestions would be great.

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: Tomcat j2sdk and image

You have reached Judge Dean M. Trafelet without authority.  Remove me from 
you email address. DMT

- Original Message - 
From: [EMAIL PROTECTED]
To: Tomcat Users List tomcat-user@jakarta.apache.org
Sent: Monday, May 02, 2005 12:09 PM
Subject: Re: Tomcat j2sdk and image

Hi,
The program java use :
java.awt.Frame;
java.awt.Graphics;
java.awt.Image;
and Acme.JPM.encoders.GifEncoders who encode image in Gif.
N.B. : the application works fine on W2K with Tomcat-4.0.4 using 
jdk-1.3.1, and Tomcat-4.1.30 and Tomcat-5.0.28 with jdk-1.4.2

Dale, Matt a écrit :
I'd be surprised if anyone could with the scant information you have 
provided. You haven't even mentioned the image library that you are 
using.

I would suggest that you get a profiler or debugger in order to work out 
what your code is doing at the time that it is generating the image and 
which methods are taking all the time.

Ta
Matt
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Sent: 02 May 2005 16:33
To: tomcat-user@jakarta.apache.org
Subject: Tomcat j2sdk and image
Hi,
I have a java application who generate image.
On Sun Solaris 8, It works fine with Tomcat-4.0.4 and jdk-1.3.1
It was the same with Tomcat-4.1.18 and jdk-1.4.1
But when I use Tomcat-4.1.30 with jdk-1.4.2 or Tomcat-5.0.28 with
jdk-1.4.1 or jdk-1.4.2, the image make a long time to be generating.
What is the problem ?
Can somebody help me ?
AL
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: Client Authentication

You have reached Judge Dean M. Trafelet without authorization.  Remove me 
from your email list immediately.
- Original Message - 
From: Mahesh S Kudva [EMAIL PROTECTED]
To: Tomcat Users List tomcat-user@jakarta.apache.org
Sent: Monday, May 02, 2005 12:34 PM
Subject: Re: Client Authentication


Hi
I tried with client.p12 first, when i failed I went on with
client_cert.x509. I placed it in the personal folder ...
Regards  Thanks

Mahesh S Kudva
-Original Message-
From: lercoli [EMAIL PROTECTED]
To: Tomcat Users List tomcat-user@jakarta.apache.org
Date: Mon, 2 May 2005 17:31:54 +0200
Subject: Re: Client Authentication
You should import only client.p12 certificate in IE browser and
when IE asks you in which folder you want to put it select Personal
Folder.
I hope it helps you.
Luca Ercoli
- Original Message - 
From: Mahesh S Kudva [EMAIL PROTECTED]
To: tomcat-user@jakarta.apache.org
Sent: Monday, May 02, 2005 5:08 PM
Subject: Client Authentication

 Dear All

 I've been able to setup Tomcat 5.0.30 successfully on port 8443. I
want to
 use client authentication. Hence i've enabled clientAuth=true in
 server.xml

 Running on Mac OS X these were the commands to create a CA and sign a
 certificate using this CA.

 Creating a new CA:
 1) perl CA.pl -newca

 Certificate request using openssl:
 1) perl CA.pl -newreq
 2) perl CA.pl -sign
 3) mv newreq.pem client_req.pem
 4) mv newcert.pem client_cert.pem
 5) openssl rsa  client_req.pem  client_key.pem
 6) openssl pkcs12 -export -in client_cert.pem -inkey client_key.pem
-out
client.p12

 For Tomcat using Java keytool to request certificate:
 1) openssl x509 -in server_cert.pem -out server.x509
 2) openssl pkcs12 -export -in server_cert.pem -inkey server_key.pem
-out server.p12
 3) keytool -genkey -alias meAsClient -storepass changeit
 4) keytool -certreq -alias measclient -file client.csr -storepass
changeit
 5) openssl x509   -req -CA demoCA/cacert.pem -CAkey
demoCA/private/cakey.pem -extensions v3_ca -in client.csr -inform
DER
-out client_cert.x509 -CAcreateserial
 6) keytool -import -alias butterflyCA -keystore /Syst..
..urity/cacerts
-file ../CA/demoCA/cacert.pem
 7) keytool -import -alias measclient -keystore clientstore
-trustcacerts
-file client_cert.x509


 Following these commands I dont get any errors. I then import the
 cacert.pem, the ROOT CA certificate and the client.p12 and
 client_cert.x509 to the browser I.E 6.0. But still there is a popup
 requesting for the clients identity and it asks me to select a
 certificate and no certificates are displayed.

 How can I go about this?


 All suggestion and ideas are welcome.



 Regards  Thanks
 
 Mahesh S Kudva



 ---
 Robosoft Technologies - Partners in Product Development



 -
 To unsubscribe, e-mail: [EMAIL PROTECTED]
 For additional commands, e-mail: [EMAIL PROTECTED]




-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

---
Robosoft Technologies - Partners in Product Development

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]


-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: Removal from List

Thanks.  DMT
- Original Message - 
From: Parsons Technical Services [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: Tomcat Users List tomcat-user@jakarta.apache.org
Sent: Monday, May 02, 2005 1:41 PM
Subject: Removal from List

Dear Sir,
I am a user of the Tomcat List and noticed a large number of emails from 
you. It appears that someone subscribed you to the list and you 
inadvertently confirmed the subscription or someone has access to your 
email. As an IT person who deals with security I recommend you have 
someone check your security and that you scan your system and that you 
change all of your passwords.

As for the List subscription, if you will look at the bottom of the emails 
you will see a link where you can send an email to unsubscribe yourself. 
As this list is staffed by volunteers and the person with the access 
needed to remove you may not get you request for several days, this would 
be your best course of action. If after attempting this you are unable to 
unsubscribe, please post to the list explaining you have tried to 
unsubscribe and have been unsuccessful. At that point as soon as a person 
with the needed access gets your message they can assist you in removing 
your email from the list.

As a user of this list it is always a concern when someone wants off the 
list and is unable to do so. As this reflects poorly on the List even 
though it is out of the lists control that you were subscribed in the 
first place.

Doug Parsons
Tomcat User
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Tomcat 4.1, Java 1.4.2_06, SSL randonmly crashing

2005-01-10 Thread Dean Jackson

If anyone can help on this, it'd be hugely appreciated.  I'm unable to
find much through Google, although am planning to spend the day looking.

Previously, I had hardware doing https:// security, and then passing to
Tomcat, which handles http:// requests quite nicely.  Now, I have Tomcat
handing https:// directly.

https:// seems to stall/lock occasionally under reasonable load.
Hitting the same exact page in http:// seems to work fine.  This is in a
production environment, and it has crashed every few hours since moving
to https://.

Help?  Any suggestions as to what I'm doing wrong?

Thanks!
Dean Jackson

j2sdk1.4.2_06
jakarta-tomcat-4.1.18

Server.xml exerpt:

Connector className=org.apache.coyote.tomcat4.CoyoteConnector
   port=80 minProcessors=5 maxProcessors=150
   enableLookups=true redirectPort=443
   acceptCount=100 debug=0 connectionTimeout=12
   useURIValidationHack=false disableUploadTimeout=true
   compression=4096 /

Connector className=org.apache.coyote.tomcat4.CoyoteConnector
   port=443 minProcessors=5 maxProcessors=150
   enableLookups=true connectionTimeout=18
   acceptCount=100 debug=0 scheme=https secure=true
   useURIValidationHack=false disableUploadTimeout=true
   compression=4096 
  Factory
className=org.apache.coyote.tomcat4.CoyoteServerSocketFactory
clientAuth=false protocol=TLS /
/Connector

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: bug in 4.1.30?? PageContextImpl hides exception cause

2004-10-10 Thread Dean Hiller

never mind.  This is fixed in tomcat 5.
thanks,
dean

- Original Message - 
From: Dean Hiller [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, October 09, 2004 11:07 PM
Subject: bug in 4.1.30?? PageContextImpl hides exception cause

In 4.1.30, In PageContextImpl, I see this code (should I post this on the
dev list instead)

525 if (t instanceof IOException) throw (IOException)t;
526 if (t instanceof ServletException) throw (ServletException)t;
527if (t instanceof RuntimeException) throw (RuntimeException)t;
528if (t instanceof JspException) {
529Throwable rootCause = ((JspException)t).getRootCause();
530if (rootCause != null) {
531throw new ServletException(t.getMessage(),
rootCause);
532} else {
533throw new ServletException(t);
534}
535}
536 throw new ServletException(t);
537 }
538}

Notice on line 533, the root cause is correctly chained.  Unfortunately,
when the exceptions print out, t is not printed and I don't know what
really happened.  This is quite annoying.  It takes 27 steps to build tomcat
4.1.30 so I wasn't quite interested in investigating further.  If it took 3,
I would probably be posting a fix because I would know more by now.

thanks for any help here,  The full exception chain is shown below.  It is
obvious there is an exception missing from this stack trace from looking at
the code of JspServletWrapper and PageContextImpl
dean

org.apache.jasper.JasperException: Cannot find message resources under key
org.apache.struts.action.MESSAGE
at
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:2
54)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Application
FilterChain.java:247)
at
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterCh
ain.java:193)
at
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.ja
va:256)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok
eNext(StandardPipeline.java:643)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.ja
va:191)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok
eNext(StandardPipeline.java:643)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at
org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2422)
at
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180
)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok
eNext(StandardPipeline.java:643)
at
org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.
java:171)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok
eNext(StandardPipeline.java:641)
at
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:163
)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok
eNext(StandardPipeline.java:641)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java
:174)
at
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invok
eNext(StandardPipeline.java:643)
at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:199)
at
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:828)
at
org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConne
ction(Http11Protocol.java:700)
at
org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:584)
at
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.jav
a:683)
at java.lang.Thread.run(Thread.java:534)
root cause(well, tomcat claims it is, but there really is one more exception
that caused this one)javax.servlet.ServletException: Cannot find message
resources under key org.apache.struts.action.MESSAGE
at
org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImp
l.java:533)
at org.apache.jsp.index_jsp._jspService(index_jsp.java:95)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853

bug in 4.1.30?? PageContextImpl hides exception cause

2004-10-09 Thread Dean Hiller

In 4.1.30, In PageContextImpl, I see this code (should I post this on the dev list 
instead)

525 if (t instanceof IOException) throw (IOException)t;
526 if (t instanceof ServletException) throw (ServletException)t;
527if (t instanceof RuntimeException) throw (RuntimeException)t;
528if (t instanceof JspException) {
529Throwable rootCause = ((JspException)t).getRootCause();
530if (rootCause != null) {
531throw new ServletException(t.getMessage(), rootCause);
532} else {
533throw new ServletException(t);
534}
535}
536 throw new ServletException(t);
537 }
538}

Notice on line 533, the root cause is correctly chained.  Unfortunately, when the 
exceptions print out, t is not printed and I don't know what really happened.  This 
is quite annoying.  It takes 27 steps to build tomcat 4.1.30 so I wasn't quite 
interested in investigating further.  If it took 3, I would probably be posting a fix 
because I would know more by now.

thanks for any help here,  The full exception chain is shown below.  It is obvious 
there is an exception missing from this stack trace from looking at the code of 
JspServletWrapper and PageContextImpl
dean


org.apache.jasper.JasperException: Cannot find message resources under key 
org.apache.struts.action.MESSAGE
at 
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:254)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at 
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at 
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at 
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
at 
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at 
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at 
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2422)
at 
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at 
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at 
org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
at 
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at 
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:163)
at 
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at 
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at 
org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:199)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:828)
at 
org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:700)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:584)
at 
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:534)
root cause(well, tomcat claims it is, but there really is one more exception that 
caused this one)javax.servlet.ServletException: Cannot find message resources under 
key org.apache.struts.action.MESSAGE
at 
org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:533)
at org.apache.jsp.index_jsp._jspService(index_jsp.java:95)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137

Re: displaying JSP output through servlet

2004-08-16 Thread Dean A. Hoover

David,
I'm not sure what you are trying to do but if you're just trying to
do MVC then you might want to use struts and tiles. It works
well for me. I also occasionally have a need for custom jsp
tags, so I learned how to do that too.
Hope this helps.
Dean Hoover
David Aleksanyan wrote:
I'm trying to design an app in a way that all requests will have to go
through a servlet.
e.g. http://localhost:8080/myservlet?somestring
But I want to make use of the JSP technology.
So I'm thinking that I'll have to somehow include the JSP compiled classes
into the servlet. and somehow put the output of the JSP into the response of
the servlet.
My question is - is this possible? and how do I do it?
Any examples would help.
Thanks,
David Aleksanyan
P.S. This is my first post, I hope it is to the point and it hasn't been
answered before, otherwise - please tell me so.
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
 


-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

deploying via ant, mutiple virtual hosts apache/tomcat

2004-07-22 Thread Dean A. Hoover

I have a named virtual host in apache that
uses mod_jk to communicate with tomcat.
I use ant/manager to deploy from my development
area, and everything works great. Now I've added
another named virtual host to apache and a new
worker for the tomcat connection. This works
great too, but not for deployment. How can I
get tomcat manager to differentiate between these
applications, since both of them are ROOT under
different directories. When I run manager through
HTML, I just see /. I can deploy my war by
hand and restart tomcat, but that is a pain.
Any ideas?
Dean Hoover
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

multiple virtual apache hosts

2004-07-17 Thread Dean A. Hoover

I have a website I have been working on
for quite some time now. I use apache as
the front end, and to serve static stuff. I
use mod_jk to connect to tomcat 5.
I develop in one area and use ant to
deploy the entire app. On disk the
/home/foo/ROOT
directory is mapped to / for foo.com.
This all works nicely. Now I want to
set up a virtual host in apache to do the
same thing (map /home/bar/ROOT to
/ for bar.com). The apache setup is done
and works. What I don't understand is
how to get tomcat manager to be able
to deploy (via ant) / for 2 different domains.
Can someone point me to an example?
Thanks.
Dean Hoover
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: HTTP header for dynamic pdf and IE6

2004-06-06 Thread Dean A. Hoover

Mark Lowe wrote:
I've seen this before ;o)
Try appending .pdf to the actual request.
/myapp/pdfgen.do;iehack=.pdf 
That's not what seems to matter. If I change
Content-Type from attachment to inline, the document
opens OK in Acrobat Reader but the Open/Save dialog
does not come up. As I stated in my email, the developers
of Yahoo mail have somehow pulled off a hack that works
as expected, I just can't seem to figure out how to replicate
it.

I've seen this used in teh xplanner project.
Mark
On 5 Jun 2004, at 11:52, Dean A. Hoover wrote:
I have a java web application that allows
an end-user in their browser to download
a file, which happens to be bytes stored
in a database.
In experimenting with how to do this, I have
this snippet of code in my servlet:
   AttachmentListItem attachment =
EmailSQL.getAttachmentListItem(connection, 3, 1);
   response.setContentType(attachment.getContentType());
   byte[] data =
EmailSQL.getAttachmentBytes(connection, 3, 1);
   response.setContentLength(data.length);
   response.setHeader(Content-Disposition,
attachment; filename=\ + attachment.getFileName() + 
\);
   ServletOutputStream out = response.getOutputStream();
   out.write(data);
   out.flush();
   out.close();

To test this out, I hit the link in my IE browser which brings up
a dialog box allowing me to Open or Save the file. If I save
the file, it does the right thing. If I press the open button, Acrobat
Reader opens up and then errors out with an alert box:
There was an error opening the document. The file does not exist.
I have a yahoo email account that I tried a test on. I sent an email
message with the same pdf file attached to that account. I wanted to
see if yahoo figured out how to make this work. They did! (but I can't
figure out how to replicate)
Their header looks like this:
Date: Thu, 03 Jun 2004 15:37:58 GMT
P3P: policyref=http://p3p.yahoo.com/w3c/p3p.xml;, CP=CAO DSP COR CUR
ADM DEV TAI PSA PSD IVAi IVDi CONi TELo OTPi OUR DELi SAMi OTRi UNRi
PUBi IND PHY ONL UNI PUR FIN COM NAV INT DEM CNT STA POL HEA PRE GOV
Content-Disposition: attachment; filename=reference.pdf
Connection: close
Transfer-Encoding: chunked
Content-Type: application/pdf; filename=foo.bar
.s4g--v=1
There is also some other stuff I am seeing just after the header: 
.s4g-v=1
which looks something like a query string, but I'm not sure.

My header looks like this:
HTTP/1.1 200 OK
Date: Thu, 03 Jun 2004 15:35:15 GMT
Server: Apache/2.0.40 (Red Hat Linux) mod_perl/1.99_07-dev Perl/v5.8.0
mod_jk/1.2.5 PHP/4.2.2 mod_python/3.0.1 Python/2.2.2 mod_ssl/2.0.40
OpenSSL/0.9.7a
Set-Cookie: JSESSIONID=DD3D0938B780EEBEBDC1B558CCBAD095; Path=/
Pragma: No-cache
Cache-Control: no-cache
Expires: Thu, 01 Jan 1970 00:00:00 GMT
Content-Disposition: attachment; filename=reference.pdf
Content-Length: 214982
Keep-Alive: timeout=15, max=100
Connection: Keep-Alive
Content-Type: application/pdf;charset=UTF-8
Does anyone know how to work around this problem? I suppose
there are actually 2 parts to this:
1) What is the magic in the HTTP header that allows this to work?
2) How can one create such a header in java?
Thanks.
Dean Hoover

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]


-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

HTTP header for dynamic pdf and IE6

2004-06-05 Thread Dean A. Hoover

I have a java web application that allows
an end-user in their browser to download
a file, which happens to be bytes stored
in a database.
In experimenting with how to do this, I have
this snippet of code in my servlet:
   AttachmentListItem attachment =
EmailSQL.getAttachmentListItem(connection, 3, 1);
   response.setContentType(attachment.getContentType());
   byte[] data =
EmailSQL.getAttachmentBytes(connection, 3, 1);
   response.setContentLength(data.length);
   response.setHeader(Content-Disposition,
attachment; filename=\ + attachment.getFileName() + \);
   ServletOutputStream out = response.getOutputStream();
   out.write(data);
   out.flush();
   out.close();
To test this out, I hit the link in my IE browser which brings up
a dialog box allowing me to Open or Save the file. If I save
the file, it does the right thing. If I press the open button, Acrobat
Reader opens up and then errors out with an alert box:
There was an error opening the document. The file does not exist.
I have a yahoo email account that I tried a test on. I sent an email
message with the same pdf file attached to that account. I wanted to
see if yahoo figured out how to make this work. They did! (but I can't
figure out how to replicate)
Their header looks like this:
Date: Thu, 03 Jun 2004 15:37:58 GMT
P3P: policyref=http://p3p.yahoo.com/w3c/p3p.xml;, CP=CAO DSP COR CUR
ADM DEV TAI PSA PSD IVAi IVDi CONi TELo OTPi OUR DELi SAMi OTRi UNRi
PUBi IND PHY ONL UNI PUR FIN COM NAV INT DEM CNT STA POL HEA PRE GOV
Content-Disposition: attachment; filename=reference.pdf
Connection: close
Transfer-Encoding: chunked
Content-Type: application/pdf; filename=foo.bar
.s4g--v=1
There is also some other stuff I am seeing just after the header: .s4g-v=1
which looks something like a query string, but I'm not sure.
My header looks like this:
HTTP/1.1 200 OK
Date: Thu, 03 Jun 2004 15:35:15 GMT
Server: Apache/2.0.40 (Red Hat Linux) mod_perl/1.99_07-dev Perl/v5.8.0
mod_jk/1.2.5 PHP/4.2.2 mod_python/3.0.1 Python/2.2.2 mod_ssl/2.0.40
OpenSSL/0.9.7a
Set-Cookie: JSESSIONID=DD3D0938B780EEBEBDC1B558CCBAD095; Path=/
Pragma: No-cache
Cache-Control: no-cache
Expires: Thu, 01 Jan 1970 00:00:00 GMT
Content-Disposition: attachment; filename=reference.pdf
Content-Length: 214982
Keep-Alive: timeout=15, max=100
Connection: Keep-Alive
Content-Type: application/pdf;charset=UTF-8
Does anyone know how to work around this problem? I suppose
there are actually 2 parts to this:
1) What is the magic in the HTTP header that allows this to work?
2) How can one create such a header in java?
Thanks.
Dean Hoover

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: Virtual Host, Locations and Mod_JK2

2004-04-13 Thread Dean Searle

I have found that if you do the following it works for me:

Location /*.jsp
JkUriSet worker ajp13:localhost:28009
/Location

Hope that this helps, I have found that by doing this I can redirect any file type to 
be handled by Tomcat.

Dean


-Original Message-
From: Alexander F. Hartner [mailto:[EMAIL PROTECTED]
Sent: Tue 4/13/2004 4:23 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Virtual Host, Locations and Mod_JK2
 
I host several websites on my apache2 (2.0.49) using virtual hosts. One 
of the hosts I would like to forward fully to a web application 
deployed on tomat via Mod_JK. What I have done is the following:

Installed the webapplication in tomcat's root / context

Configured a worker in workers2.properties

Configured a virutal host on apache2

VirtualHost 196.22.194.227
 ServerAdmin [EMAIL PROTECTED]
 DocumentRoot /home/www/solms.co.za/
 ServerName www.solms.co.za
 ServerAlias solms.co.za *.solms.co.za solmstraining.co.za 
*.solmstraining.co.za
 ErrorLog logs/solms.co.za-error_log
 CustomLog logs/solms.co.za-access_log combined
 Location /
   JkUriSet worker ajp13:localhost:28009
 /Location
/VirtualHost

Everything is working, except the Location directive spans all my other 
virtual hosts as well. A request to any of the virtual hosts is 
redirected to /index.jsp, which I guess comes from my web application's 
deployment descriptor. Direct requests to otherhost.com/index.html are 
still processed by apache correctly, but general request to 
otherhost.com are redirected to otherhost.com/index.jsp.

Ugly solution:
What I have done in the mean time is to either
-create index.jsp files which are typically copies of the index.html
-modify the webapplication to redirect to index.html

I should not have to do this as the location should only work for the 
virtual host in which it is configured.

Any suggestions welcome

Alex



-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Securing a folder

2004-03-25 Thread Dean Searle

Hello Everyone,

Not to sure how to phrase this but here I go anyways. I am attempting to secure a 
folder that is located within my application. This folder contains pdf's that only 
need to be accessible by tomcat, the site requires a password to enter. At first if I 
did www.domain.com/pdfs/somefile.pdf it would open up somefile.pdf. So I tried this in 
my http.conf file for the website:

Location /pdfs
  order deny,allow
  deny from all
  allow from 127.0.0.1
/Location

But now tomcat cannot even retrieve the pdf's. Am I doing this right. Could you please 
point me to some doc's that might explain this more.

Not sure if this helps or not:

Windows 2000 Server SP4
Tomcat 4.1.24 LE
Apache 2.0.46
JDK 1.4.1_02

Thank you for time

Dean

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: Tomcat configuration

2004-03-24 Thread Dean Searle

If you want Tomcat to start as a service in Windows 2k you can use this program by 
Davis Boyer called Tomcat Service Manager at 
http://web.bvu.edu/staff/david/index.jsp?section=softwaresubsection=tcservcfgpage=overview
 I use this for both Tomcat 4.1 and Tomcat 5. This utility also let you set the heap 
size also.

Hope this helps.

Dean


-Original Message-
From: Adam Brundrett [mailto:[EMAIL PROTECTED]
Sent: Wed 3/24/2004 9:59 AM
To: Tomcat Users List
Subject: Re: Tomcat configuration
 
Hmm...not sure on Windows but on unix you set an environment variable 
called CATALINA_OPTS.  Set the Xmx and Xms parameters to the amount of 
memory you want to dedicate to the heap.  On our web server where we 
have 2GB ram I have:

CATALINA_OPTS=-Xms=750m  -Xmx=750m

Tomcat then picks up this memory option when it fires up.

Reis, Tom wrote:

   I am running Tomcat 4.03 on a windows 2K server with JDK1.3.1. I am
confused on configuration and was hoping someone could clarify or point to
documentation on it. I am confused on memory configuration do I change the
memory configuration for java or for Tomcat. I am also not sure how to
change the heap size. Do I put a statement in the server.xml or is it
something else. Is there documentation that tells you how to configure
Tomcat. Thanks.

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

  


-- 
***
Adam Brundrett
DBA/Software Engineer
MLC Development
Medical Research Council
Harwell
Oxon.
OX11 0RD

Email: [EMAIL PROTECTED] 
Tel: +44(0)1235 841253
***



-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]





-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

No error message when welcome page is not present

2004-03-17 Thread Dean Searle

Hello Group,

I am running Apache 2.0.48 and Tomcat 4.1.30 with mod_jk2 connector
2.0.2 all on windows xp.

The problem I have is this. I have virtual hosts setup to go to their
own folder for their documentroot=/theirfolder. But if I do not have a
valid welcome file there, either an index.(htm,jsp) It takes me to
tomcat manager page. Without restarting anything I can put a valid file
in the folder and site works fine. Where can I shut this off at? I would
like to get an error page, since I have directory listing shut off.
Would it be in web.xml or server.xml?

Thanks in advance,

Dean


-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: Multiple Host (no apache or iis)

2004-03-17 Thread Dean Searle

What port is tomcat listening to? If you have not changed this then it
would be 8080 (I believe) so you would type in a browser
http://www.test1-domain.com:8080 and it should bring up your site. To
keep from having to enter the port every time, change your server.xml to
listen to port 80 instead. 80 is the default http port.

Best regards,

Dean

-Original Message-
From: Roland Carlsson [mailto:[EMAIL PROTECTED] 
Sent: Friday, March 12, 2004 2:24 PM
To: Tomcat Users List
Subject: Multiple Host (no apache or iis)

Hi!
I have tried to search for this but all hits seems to be about getting
tomcat to work together with apache or iis.

I can't figure out why my test1-domain doesn't answer at all. All I gets
is
a 400-error. What bother me the most is that there is nothing in the
catalina.out log that indicats that there are something wrong so I don't
even know where to start look.

I post the Host-part of my server.xml below.

Thanks in advance
Roland Carlsson


Host name=test1.mydomain.com debug=0 appBase=webapps:
unpackWARs=true autoDeploy=true
xmlValidation=false xmlNamespaceAware=false
Valve className=org.apache.catalina.valves.AccessLogValve
directory=logs prefix=test1_access_log. suffix=.txt
pattern=combined resolveHosts=false/
Logger className=org.apache.catalina.logger.FileLogger
directory=logs prefix=test1.log. suffix=.txt
timestamp=true/
/Host
Host name=localhost debug=0 appBase=webapps
unpackWARs=true autoDeploy=true
xmlValidation=false xmlNamespaceAware=false

Valve className=org.apache.catalina.valves.AccessLogValve
directory=logs prefix=localhost_access_log. suffix=.txt
pattern=combined resolveHosts=false/
Logger className=org.apache.catalina.logger.FileLogger
directory=logs prefix=localhost_log. suffix=.txt
timestamp=true/
/Host



-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]




-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

apache 2, tomcat 5, and ROOT application

2004-02-26 Thread Dean A. Hoover

Tomcat 5 uses ROOT for the root application,
and whatever for other applications. For
example, I am keeping my content in its
own hierarchy:
/home/tomcat/mywebsite/webapps/ROOT
/home/tomcat/mywebsite/webapps/myapp
I want apache to handle static content
and tomcat to handle servlet related
stuff (jsp, etc). I am wondering how
to specify that in httpd.conf. If I set
DocumentRoot to /home/mywebsite/webapps/ROOT/
that will work for http://mywebsite.com/ but
it will not find myapp. If I set it to
/home/mywebsite/webapps/ it can find
http://mywebsite.com/myapp, but then I don't
know how it can find the ROOT directory.
Here's an httpd.conf snippet:
#==
VirtualHost *:80
  ServerAdmin [EMAIL PROTECTED]
  ServerName www.mywebsite.com
  ServerAlias mywebsite.com
  DocumentRoot /home/tomcat/mywebsite.com/webapps/ROOT/
  ErrorLog /home/tomcat/mywebsite.com/logs/error_log
  CustomLog /home/tomcat/mywebsite.com/logs/access_log common
  # Deny direct access to WEB-INF and META-INF
  #
  Location /WEB-INF
AllowOverride None
deny from all
  /Location
#  Location /META-INF
AllowOverride None
deny from all
  /Location
  JkMount /*.jsp mywebsite
/VirtualHost
#=
Any ideas?
Dean Hoover

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

ant emulation of Upload a WAR file to install

I am using ant 1.6 and tomcat 4.1.29.
I have set my webapps directory to someplace
other than the usual place. When I use
the /manager/html/list application through
my browser, I can use the Upload a WAR file to install
form to put my war file in the webapps directory,
unpack it and run it. This is exactly the behavior
I would like to emulate in ant, but I do not see
how. I have played around with the install and
deploy tasks, but they do not operate the same
as the upload form does. How can I do what the
form does using ant?
Thanks.
Dean Hoover
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: ant emulation of Upload a WAR file to install

Thanks. I'll give that a try... when does tomcat notice
the war file?
Adam Hardy wrote:

On 02/23/2004 03:04 PM Dean A. Hoover wrote:

I am using ant 1.6 and tomcat 4.1.29.
I have set my webapps directory to someplace
other than the usual place. When I use
the /manager/html/list application through
my browser, I can use the Upload a WAR file to install
form to put my war file in the webapps directory,
unpack it and run it. This is exactly the behavior
I would like to emulate in ant, but I do not see
how. I have played around with the install and
deploy tasks, but they do not operate the same
as the upload form does. How can I do what the
form does using ant?


You just need ant to copy the war into your APPBASE directory. Then 
tomcat will do the rest, assuming that your host (in server.xml) is 
configured to autoDeploy=true and unpackWARs=true.

Adam




-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: ant emulation of Upload a WAR file to install

Shapira, Yoav wrote:

Howdy,

This says everything...Excerpt from
http://www.devx.com/Java/Article/17908/0/page/4
Tomcat does not detect changes to the WAR archive, so it does not
automatically deploy new versions of an application when new WAR files
are copied over old ones in the Tomcat deploy directory (except in the
case of statically specified Tomcat applications in the server.xml
configuration file).

Note that:
- The DevX article writer would have done well to tell people about the
Ant tasks tomcat supplies in order to deploy/undeploy/restart webapps,
instead of encouraging people to write their own (possibly buggy, likely
incompatible with future tomcat versions) tasks.
- The article was written prior to the release of tomcat 5 stable, which
contains behavioral changes in this area.

Like what? I am using 4.1.29 and ant 1.6. All I want to do is emulate
the behavior
of the upload war file form in the browser manager. I do not seem to be
able to do
that with the ant manager tasks that come with 4.1.29. Are there more in
5.0?

Yoav Shapira

This e-mail, including any attachments, is a confidential business communication, and may contain information that is confidential, proprietary and/or privileged. This e-mail is intended only for the individual(s) to whom it is addressed, and may not be saved, copied, printed, disclosed or used by anyone else. If you are not the(an) intended recipient, please immediately delete this e-mail from your computer system and notify the sender. Thank you.

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Apache Tomcat/5.0.19 manager app

I just upgraded from 4.1.29 to 5.0.19.
How does tomcat find the manager and admin
apps? In the older versions, they used
context fragments in the standard webapps
directory that effectively pointed to
../server/webapps. I don't see this
mechanism in 5.0.19 and want to know
how it works.
I need this because I am changing
Host appBase to another location so
that I can keep my apps separate from
tomcats home. When I did this under
4.1.x, I simply put a manager.xml file
in my webapps directory that pointed
to the standard app, with an absolute
path. That worked like a charm. I do
not know how to do the same thing
in 5.x.
Any help? Thanks.
Dean Hoover
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

deploy with ant over https

2004-02-22 Thread Dean A. Hoover

I have used ant and tomcat 4.1 manager to
deploy to my localhost, and it works just
great. On a remote host, I have an apache/tomcat
setup with manager only accessible over https.
In a browser, I can get to the manager functions
without any problem. However, when I try it
through ant I get:
build.xml:158: javax.net.ssl.SSLHandshakeException: 
java.security.cert.CertificateException: Couldn't find trusted certificate

I assume I have to perform some magic on the
client side. Does anyone know what that magic
is?
Regards.
Dean Hoover
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

server.xml versioning

2004-02-22 Thread Dean A. Hoover

I have tomcat 4.1.x running on 2 different machines.
I am using the manager application. On one machine,
the server.xml file is versioned, such as:
server.xml.2004-02-22.09-13-01

on the other server it is not. What enables
versioning?
Dean Hoover

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

URL Redirect

2004-02-18 Thread Dean Searle

Hello All,

 

I have a simple, yet allusive question. In Apache and Tomcat you can create Virtual 
Hosts. Within the Virtual Hosts you can specify different parameters. In Apache 
httpd.conf I can have the following:

VirtualHost 192.168.1.1
 ServerName www.domain1.com
 Redirect permanent / http://www.domain2.com/domain2
/VirtualHost

 

Is there a feature like that in Tomcat, either in the server.xml or web.xml, I'm 
probably guessing server.xml.

Any help is greatly appreciated.

Thank you in advanced,

Dean


-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: workers2.properties syntax

2004-02-04 Thread Dean Searle

What aspects are you wanting to change and I'll see if I can help explain them. I'm 
somewhat new to this also, but have spent almost a year decipering and figuring things 
out.

Dean


-Original Message-
From: Alvaro Seixas [mailto:[EMAIL PROTECTED]
Sent: Tue 2/3/2004 3:15 PM
To: Tomcat Users List
Subject: workers2.properties syntax
 
Hello,

I'd like to know if someone knows where I can find any document describing the syntax 
for workers2.properties different from the one that comes with Tomcat 5.
Cause the one that I'm using I copied from this list (and it's working) and there's 
some aspects I want to change that I have no idea how to do it.

Thanks,
Alvaro



-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: HTTPS with Apache 2.0.48 and Tomcat 5.0.16

2004-02-03 Thread Dean Searle

Here is part of my httpd.conf for and Apache2, Tomcat 4.1.29 and mod_jk2 setup. This 
is only for the Virtual host part. Assuming you have everyhting else loading correctly 
it should work.

NameVirtualHost 127.0.0.1:443
NameVirtualHost 127.0.0.1:80

VirtualHost 127.0.0.1:80
ServerName www.domain.com
ServerAlias domain.com
Redirect permanent / https://www.domain.com
/VirtualHost


VirtualHost 127.0.0.1:443
ServerName www.domain.com
ServerAlias domain.com
DocumentRoot z:/tomcattest/webapps
ErrorLog z:/tomcattest/logs/domain_error.log
CustomLog z:/tomcattest/logs/domain_access.log common
SSLEngine On
SSLCertificateFile  conf/ssl/domain.crt
SSLCertificateKeyFile   conf/ssl/domain.key.unsecure
SSLCACertificateFileconf/ssl/intermediate.crt

Location /rvdc
SSLRequireSSL
/Location

Location /domain/WEB-INF/*
AllowOverride None
deny from all
/Location

Location /webapps/*.jsp
JkUriSet group ajp13:localhost:8109
/Location
/VirtualHost

The JkMount directives only work for mod_jk. Mod_jk2 requires a whole new set of 
directives to work. Following is my server.xml and workers2.properties that should 
help.

***workers2.properties***

# only at beginnin. In production uncomment it out
[logger.apache2]
level=DEBUG

[shm]
file=z:/tomcat/logs/jk2.shm
size=1048576

# Example socket channel, override port and host.
[channel.socket:localhost:8109]
port=8109
host=127.0.0.1

[channel.socket:localhost:8110]
port=8110
host=127.0.0.1

[channel.socket:localhost:8111]
port=8111
host=127.0.0.1

#[channel.jni:jni]
#info=The jni channel, used if tomcat is started inprocess

[status:]
info=Status worker, displays runtime information

#[vm:]
#info=Parameters used to load a JVM in the server process
#JVM=C:\jdk\jre\bin\hotspot\jvm.dll
#OPT=-Djava.class.path=Z:/Tomcat/bin/tomcat-jni.jar;Z:/Tomcat/server/lib/commons-logging.jar
#OPT=-Dtomcat.home=${TOMCAT_HOME}
#OPT=-Dcatalina.home=${TOMCAT_HOME}
#OPT=-Xmx128M
#OPT=-Djava.compiler=NONE
#disabled=0

#[worker1.jni:onStartup]
#info=Command to be executed by the VM on startup. This one will start tomcat.
#class=org/apache/jk/apr/TomcatStarter
#ARG=start
#disabled=0
#stdout=Z:/tomcat/logs/stdout.log
#stderr=Z:/tomcat/logs/stderr.log

#[worker1.jni:onShutdown]
#info=Command to be executed by the VM on shutdown. This one will stop tomcat.
#class=org/apache/jk/apr/TomcatStarter
#ARG=stop
#disabled=0

# Define the worker
# First Web Application Worker
[ajp13:localhost:8109]
channel=channel.socket:localhost:8109

# Second Web Application Worker
[ajp13:localhost:8110]
channel=channel.socket:localhost:8110

# Third Web Application Worker
[ajp13:localhost:8111]
channel=channel.socket:localhost:8111

 Uri mapping
[uri:127.0.0.1/*.jsp]
worker=ajp13:localhost:8109

[uri:/jkstatus/*]
info=Display status information and checks the config file for changes.
worker=status:status

[uri:www.domain.com/*.jsp]
group=ajp13:localhost:8109


***server.xml***
***This is the only section you need to make sure is enabled. Leave everything else 
alone. Note: the port designated here might be different than yours. You can use any 
port you want here as long as you use the same port in the httpd.conf and the 
workers2.properties file.

 !-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 --
Connector className=org.apache.coyote.tomcat4.CoyoteConnector
   port=8109 minProcessors=5 maxProcessors=75
   enableLookups=true redirectPort=8443
   acceptCount=10 debug=0 connectionTimeout=0
   useURIValidationHack=false
   protocolHandlerClassName=org.apache.jk.server.JkCoyoteHandler/

***I hope that this helps you out.***

Dean


-Original Message-
From: Oscar Carrillo [mailto:[EMAIL PROTECTED]
Sent: Mon 2/2/2004 4:04 PM
To: Tomcat Users List; [EMAIL PROTECTED]
Subject: Re: HTTPS with Apache 2.0.48 and Tomcat 5.0.16
 
Hi,

The JkMount directives tell Apache to pass these request thru the 
Connector to Tomcat.

I do this very same thing for jWebMail, cause I don't want it accessible 
thru http, only https. Here's my ssl.conf config section for it:
--
VirtualHost _default_:443
#Other stuff about your ssl host

#Webmail
# Static files
Alias /webmail /usr/local/tomcat/webapps/webmail

Directory /usr/local/tomcat/webapps/webmail
Options Indexes FollowSymLinks
DirectoryIndex index.jsp
/Directory

Location /webmail/META-INF/*
AllowOverride None
deny from all
/Location

Location /webmail/WEB-INF/*
AllowOverride None
deny from all
/Location

JkMount /webmail/do/*  ajp13
JkMount /webmail/*.jsp  ajp13
JkMount /webmail/WebMail  ajp13
JkMount /webmail/WebMail

Re: apache + tomcat virtual hostnames

2004-02-02 Thread Dean A. Hoover

OK, I am answering my own question here...

The trick is to set:

UseCanonicalName on

in httpd.conf

Dean A. Hoover wrote:

I am using apache 2 and tomcat 4.1 connected
with mod_jk. I have multiple virtual named
hosts in the httpd.conf file, such as:
VirtualHost *:80
  ServerName www.myserver.com
  ServerAlias myserver.com
  ...
set up so that apache serves up the static
content, and tomcat will handle the servlet
stuff. In my server.xml file I set the attribute
name to www.myserver.com in the Host tagset.
This works fine if I hit http://www.myserver.com
but not for http://myserver.com. Apache handles
both the same, but not tomcat. Is there something
like ServerAlias in tomcat?
Dean

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]



-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

apache + tomcat virtual hostnames

2004-02-01 Thread Dean A. Hoover

I am using apache 2 and tomcat 4.1 connected
with mod_jk. I have multiple virtual named
hosts in the httpd.conf file, such as:
VirtualHost *:80
  ServerName www.myserver.com
  ServerAlias myserver.com
  ...
set up so that apache serves up the static
content, and tomcat will handle the servlet
stuff. In my server.xml file I set the attribute
name to www.myserver.com in the Host tagset.
This works fine if I hit http://www.myserver.com
but not for http://myserver.com. Apache handles
both the same, but not tomcat. Is there something
like ServerAlias in tomcat?
Dean

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Requiring SSL for web sites

2004-01-29 Thread Dean Searle

Hello to Everyone.

I am trying to get SSL to run on a standalone version of Tomcat 4.1. I can import 
certificate into the keystore and I can get to https:\\localhost with no problems (I 
specified port 443 for the SSL config). But what I was wondering is how do I set a 
requirement that certain folders use SSL only. Because I can get to http:\\localhost 
(as an example) also with no problem.

Any help would be greatly appreciated.

Dean Searle

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: Requiring SSL for web sites

2004-01-29 Thread Dean Searle

Sorry for the bother I found the answer I was looking for further down in previous 
posts, but thanks anyways.

Dean

-Original Message-
From: Dean Searle [mailto:[EMAIL PROTECTED]
Sent: Thu 1/29/2004 1:13 PM
To: Tomcat Users List
Subject: Requiring SSL for web sites

Hello to Everyone.

I am trying to get SSL to run on a standalone version of Tomcat 4.1. I can import 
certificate into the keystore and I can get to https:\\localhost with no problems (I 
specified port 443 for the SSL config). But what I was wondering is how do I set a 
requirement that certain folders use SSL only. Because I can get to http:\\localhost 
(as an example) also with no problem.

Any help would be greatly appreciated.

Dean Searle

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

http, https, shared, and deployment

2004-01-25 Thread Dean A. Hoover

Suppose I want to create a website that has some
dynamic content (served by tomcat) and some static
content (served by apache). Also suppose that some
of the pages on my website need to be https and
some of the pages need to be http. Some stuff is
shared (both http and https), like the logo GIF
and css files.
I have figured a way to do this by hand, and
am interested in comments on this approach. I am
also interested in how one would go about deploying
such a website, using ant. Maybe some more ideas
on directory layout, if you have any.
Thanks.
Dean Hoover
Here's what I am currently doing by hand (foo.com
is obviously fictituous):
httpd.conf:
...
#--
VirtualHost *:80
  ServerAdmin [EMAIL PROTECTED]
  ServerName www.foo.com
  ServerAlias foo.com
  DocumentRoot /home/tomcat/foo.com/http
  ErrorLog /home/tomcat/foo.com/logs/error_log
  CustomLog /home/tomcat/foo.com/logs/access_log common
  IfModule mod_jk.c
JkMount /*.jsp foo-http
  /IfModule
  Alias /images/ /home/tomcat/foo.com/images/

  Location /*/WEBINF/*
AllowOverride None
Deny from all
  /Location
/VirtualHost
#--
VirtualHost *:443
  ServerAdmin [EMAIL PROTECTED]
  ServerName www.foo.com
  ServerAlias foo.com
  DocumentRoot /home/tomcat/foo.com/https
  ErrorLog /home/tomcat/foo.com/logs/error_log
  CustomLog /home/tomcat/foo.com/logs/access_log common
  IfModule mod_jk.c
JkMount /*.jsp foo-https
  /IfModule
  Alias /images/ /home/tomcat/foo.com/images/

  IfModule mod_ssl.c
SSLEngine on
SSLCertificateFile /home/tomcat/foo.com/foo.com.pem
  /IfModule
/VirtualHost
...
workers.properties:
ps=/
workers.tomcat_home=/usr/jakarta-tomcat
workers.java_home=/usr/java/j2sdk1.4.2
worker.list=foo-http,foo-https

worker.foo-http.port=8009
worker.foo-http.host=localhost
worker.foo-http.type=ajp13
worker.foo-https.port=8010
worker.foo-https.host=localhost
worker.foo-https.type=ajp13


server.xml:
Server port=8005 shutdown=SHUTDOWN debug=0
  Listener className=org.apache.ajp.tomcat4.config.ApacheConfig
modJk=/usr/lib/httpd/modules/mod_jk.so
workersConfig=/usr/local/jakarta-tomcat/conf/jk/workers.properties
jkLog=/usr/local/jakarta-tomcat/logs/mod_jk.log
jkDebug=info/
  Service name=foo-http
Connector className=org.apache.ajp.tomcat4.Ajp13Connector
   address=127.0.0.1
   port=8009
   minProcessors=5
   maxProcessors=75
   enableLookups=false
   acceptCount=10
   debug=0/
Engine name=standalone debug=0 defaultHost=foo.com
  Logger className=org.apache.catalina.logger.FileLogger
  prefix=catalina_log. suffix=.txt
  timestamp=true/
  Host name=foo.com debug=0 unpackWARs=true
Context path= docBase=/home/tomcat/foo.com/http
 debug=0 reloadable=true /
  /Host
/Engine
  /Service
  Service name=foo-https
Connector className=org.apache.ajp.tomcat4.Ajp13Connector
   address=127.0.0.1
   port=8010
   minProcessors=5
   maxProcessors=75
   enableLookups=false
   acceptCount=10
   debug=0/
Engine name=standalone debug=0 defaultHost=foo.com
  Logger className=org.apache.catalina.logger.FileLogger
  prefix=catalina_log. suffix=.txt
  timestamp=true/
  Host name=foo.com debug=0 unpackWARs=true
Context path= docBase=/home/tomcat/foo.com/https
 debug=0 reloadable=true /
  /Host
/Engine
  /Service
/Server

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Creating Database realm problem...

2004-01-14 Thread Richard Dean

Hi,

I am tearing my hair out at this one! I am attempting to set up JDBCRealm
for my tomcat installation (vers 4.1) and I keep getting the:

Catalina.start: LifecycleException: Exception Opening Database Connection:
Java.sql.SQLException: Com.ibm.db2.jdbc.app.DB2Driver

when I try and start tomcat.

My server.xml looks like:

Realm className=org.apache.catalina.realm.JDBCRealm debug=99
  driverName=COM.ibm.db2.jdbc.app.DB2Driver
  connectionURL=jdbc:db2:antech
  connectionName = ausername
  connectionPassword =apassword
  userTable=user 
  userNameCol=userid 
  userCredCol=pwd
  userRoleTable=user_roles 
  roleNameCol=user_role / 

Things I have done include:

Put db2java.jar in : %CATALINA_HOME%/lib/ , /server/lib/, /common/lib/,
../web-inf/lib
Set JDBC_HOME to point to /server/lib/db2java.jar (also tried pointing
db2java.jar in sqllib/java directory for DB2)
Connecting to the database using the above driverName and connectionURL from
a java app - works no problem
Sacrificed an old mobile phone to the code gods!

This covers every other answer I have found to this problem on the internet,
if anyone can come up with any other solutions I would be a happy chappy!

Cheers

Richard

Unclear about JDBC resource def in Tomcat 4.1

2003-12-04 Thread Dean, Michael D.

I'm using Tomcat 4.1...

I have the O'Reilly after-market book for reference AWA the Jakarta info...

I'm unclear about JDBC config issues...

*   Any JDBC client webapp can instantiate a driver and get a Connection
WITHOUT ANY DEFINITION TO THE server.xml or the web.xml as long as the
driver jars are in /shared/lib or /application/WEB-INF/lib...True or
False?

*   For convenience, JDBC resources may be be defined to Tomcat as JNDI
Data Sources to the default JNDI context provided by Tomcat,otherwise no
config required...True or false?

Best Regards,

Michael Dean
Sun Certified Programmer for the Java 2 Platform
Washington State Department of Corrections
ph: 360-664-8802
fx:  360-664-3985
mailto:[EMAIL PROTECTED]

I'm a sailor, of the waters and the sun,
I can fight the waves but have no weapons for the calm... 
 - The Ship



Best Regards,

Michael Dean
Sun Certified Programmer for the Java 2 Platform
Washington State Department of Corrections
ph: 360-664-8802
fx:  360-664-3985
mailto:[EMAIL PROTECTED]

I'm a sailor, of the waters and the sun,
I can fight the waves but have no weapons for the calm... 
 - The Ship


-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Recall: Unclear about JDBC resource def in Tomcat 4.1

2003-12-04 Thread Dean, Michael D.

Dean, Michael D. would like to recall the message, Unclear about JDBC
resource def in Tomcat 4.1.

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Unclear about JDBC resource def in Tomcat 4.1

2003-12-04 Thread Dean, Michael D.

I'm using Tomcat 4.1...

I have the O'Reilly after-market book for reference AWA the Jakarta info...

I'm unclear about JDBC config issues...

*   Any JDBC client webapp can instantiate a driver and get a Connection
WITHOUT ANY DEFINITION TO THE server.xml or the web.xml as long as the
driver jars are in /shared/lib or /application/WEB-INF/lib...True or
False?

*   For convenience, JDBC resources may be be defined to Tomcat as JNDI
Data Sources to the default JNDI context provided by Tomcat,otherwise no
config required...True or false?

Best Regards,

Michael Dean
Sun Certified Programmer for the Java 2 Platform
Washington State Department of Corrections
ph: 360-664-8802
fx:  360-664-3985
mailto:[EMAIL PROTECTED]

I'm a sailor, of the waters and the sun,
I can fight the waves but have no weapons for the calm... 
 - The Ship



Best Regards,

Michael Dean
Sun Certified Programmer for the Java 2 Platform
Washington State Department of Corrections
ph: 360-664-8802
fx:  360-664-3985
mailto:[EMAIL PROTECTED]

I'm a sailor, of the waters and the sun,
I can fight the waves but have no weapons for the calm... 
 - The Ship


-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: LDAP connection problem through JSP

2003-12-01 Thread Dean Searle

This is the simple jsp I used to test my JNDI Connection with:

%
String id = request.getRemoteUser();
out.write(User:  + id);
%

See if that helps any.

Dean


-Original Message-
From:   Damien Pacaud [mailto:[EMAIL PROTECTED]
Sent:   Mon 12/1/2003 06:00
To: [EMAIL PROTECTED]
Cc: 
Subject:LDAP connection problem through JSP
hi list, 
I am trying to get the login for the user authentificated through LDAP in a JSP...
I tryed : request.getRemoteUser();
but that returns always null...
I am sure it can be done but am unable to find how...

Any help would be greatly appreciated ;)

Thanks in advance

Damien Pacaud

---
le prsent message (ainsi que ses ventuelles pices jointes) peut
contenir des informations confidentielles. Etant tabli  l'intention de ses
destinataires, son utilisation ou diffusion non autorise est interdite.

Tout message lectronique tant susceptible d'altration, Prisma Presse
dcline toute responsabilit au titre dudit message en cas de falsification.

Ce message a t trait par un anti virus et aucun virus connu n'a t dtect.





-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: Unique error message when starting Tomcat 4.1.27

2003-11-17 Thread Dean Searle

ok, sorry I didn't see that in the error message until I reread it. I'll use the flag 
-Djava.net.preferIPv4Stack=true and see if that helps.

Thank you again,

Dean


-Original Message-
From:   Shapira, Yoav [mailto:[EMAIL PROTECTED]
Sent:   Mon 11/17/2003 09:02
To: Tomcat Users List
Cc: 
Subject:RE: Unique error message when starting Tomcat 4.1.27

Howdy,
Not a tomcat problem: it's your OS configuration.  Either make sure your
OS has an IPv6 stack installed or add the IPv4 preference flag to
JAVA_OPTS as the error message suggests.

Yoav Shapira
Millennium ChemInformatics


-Original Message-
From: Dean Searle [mailto:[EMAIL PROTECTED]
Sent: Friday, November 14, 2003 10:54 PM
To: Tomcat Users List
Subject: Unique error message when starting Tomcat 4.1.27

I have just installed tomcat 4.1.27 from the FreeBSD Ports for FreeBSD
5.0-RELEASE-p11. Here is the JDK I am using:

Java(TM) 2 Runtime Environment, Standard Edition (build
1.4.2-p5-dean_13_nov_2003_15_51)
Java HotSpot(TM) Client VM (build 1.4.2-p5-dean_13_nov_2003_15_51,
mixed
mode)

Here is the message I get when I start tomcat:

snip


./catalina.sh run
Using CATALINA_BASE:   /usr/local/jakarta-tomcat4.1
Using CATALINA_HOME:   /usr/local/jakarta-tomcat4.1
Using CATALINA_TMPDIR: /usr/local/jakarta-tomcat4.1/temp
Using JAVA_HOME:   /usr/local/jdk1.4.2
Nov 14, 2003 9:55:06 PM org.apache.commons.modeler.Registry
loadRegistry
INFO: Loading registry information
Nov 14, 2003 9:55:06 PM org.apache.commons.modeler.Registry getRegistry
INFO: Creating new Registry instance
Nov 14, 2003 9:55:07 PM org.apache.commons.modeler.Registry getServer
INFO: Creating MBeanServer
Nov 14, 2003 9:55:08 PM org.apache.coyote.http11.Http11Protocol init
SEVERE: Error initializing endpoint
java.net.SocketException: IPv4 mapped addresses usage is turned off.
Set net.inet6.ip6.v6only=0 or use '-Djava.net.preferIPv4Stack=true' to
disable java IPv6 support
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:331)
at java.net.ServerSocket.bind(ServerSocket.java:318)
at java.net.ServerSocket.init(ServerSocket.java:185)
at java.net.ServerSocket.init(ServerSocket.java:141)
at
org.apache.tomcat.util.net.DefaultServerSocketFactory.createSocket(Defa
u
ltServerSocketFactory.java:96)
at
org.apache.tomcat.util.net.PoolTcpEndpoint.initEndpoint(PoolTcpEndpoint
.
java:275)
at
org.apache.coyote.http11.Http11Protocol.init(Http11Protocol.java:150)
at
org.apache.coyote.tomcat4.CoyoteConnector.initialize(CoyoteConnector.ja
v
a:1156)
at
org.apache.catalina.core.StandardService.initialize(StandardService.jav
a
:579)
at
org.apache.catalina.core.StandardServer.initialize(StandardServer.java:
2
246)
at
org.apache.catalina.startup.Catalina.start(Catalina.java:511)
at
org.apache.catalina.startup.Catalina.execute(Catalina.java:400)
at
org.apache.catalina.startup.Catalina.process(Catalina.java:180)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.ja
v
a:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccesso
r
Impl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:203)
Catalina.start: LifecycleException:  Protocol handler initialization
failed: java.net.SocketException: IPv4 mapped addresses usage is turned
off.  Set net.inet6.ip6.v6only=0 or use
'-Djava.net.preferIPv4Stack=true' to disable java IPv6 support
LifecycleException:  Protocol handler initialization failed:
java.net.SocketException: IPv4 mapped addresses usage is turned off.
Set net.inet6.ip6.v6only=0 or use '-Djava.net.preferIPv4Stack=true' to
disable java IPv6 support
at
org.apache.coyote.tomcat4.CoyoteConnector.initialize(CoyoteConnector.ja
v
a:1158)
at
org.apache.catalina.core.StandardService.initialize(StandardService.jav
a
:579)
at
org.apache.catalina.core.StandardServer.initialize(StandardServer.java:
2
246)
at
org.apache.catalina.startup.Catalina.start(Catalina.java:511)
at
org.apache.catalina.startup.Catalina.execute(Catalina.java:400)
at
org.apache.catalina.startup.Catalina.process(Catalina.java:180)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.ja
v
a:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccesso
r
Impl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:203)
Catalina.stop: LifecycleException:  This server has not yet been
started
LifecycleException:  This server has not yet been started
at
org.apache.catalina.core.StandardServer.stop

RE: Unique error message when starting Tomcat 4.1.27

2003-11-17 Thread Dean Searle


Yoav,

That worked. I put JAVA_OPTS=-Djava.net.preferIPv4Stack=true for run,start and stop 
in my catalina.sh and now it starts.

Thank you very much

Dean

-Original Message-
From:   Dean Searle
Sent:   Mon 11/17/2003 10:04
To: Tomcat Users List
Cc: 
Subject:RE: Unique error message when starting Tomcat 4.1.27
ok, sorry I didn't see that in the error message until I reread it. I'll use the flag 
-Djava.net.preferIPv4Stack=true and see if that helps.

Thank you again,

Dean


-Original Message-
From:   Shapira, Yoav [mailto:[EMAIL PROTECTED]
Sent:   Mon 11/17/2003 09:02
To: Tomcat Users List
Cc: 
Subject:RE: Unique error message when starting Tomcat 4.1.27

Howdy,
Not a tomcat problem: it's your OS configuration.  Either make sure your
OS has an IPv6 stack installed or add the IPv4 preference flag to
JAVA_OPTS as the error message suggests.

Yoav Shapira
Millennium ChemInformatics


-Original Message-
From: Dean Searle [mailto:[EMAIL PROTECTED]
Sent: Friday, November 14, 2003 10:54 PM
To: Tomcat Users List
Subject: Unique error message when starting Tomcat 4.1.27

I have just installed tomcat 4.1.27 from the FreeBSD Ports for FreeBSD
5.0-RELEASE-p11. Here is the JDK I am using:

Java(TM) 2 Runtime Environment, Standard Edition (build
1.4.2-p5-dean_13_nov_2003_15_51)
Java HotSpot(TM) Client VM (build 1.4.2-p5-dean_13_nov_2003_15_51,
mixed
mode)

Here is the message I get when I start tomcat:

snip


./catalina.sh run
Using CATALINA_BASE:   /usr/local/jakarta-tomcat4.1
Using CATALINA_HOME:   /usr/local/jakarta-tomcat4.1
Using CATALINA_TMPDIR: /usr/local/jakarta-tomcat4.1/temp
Using JAVA_HOME:   /usr/local/jdk1.4.2
Nov 14, 2003 9:55:06 PM org.apache.commons.modeler.Registry
loadRegistry
INFO: Loading registry information
Nov 14, 2003 9:55:06 PM org.apache.commons.modeler.Registry getRegistry
INFO: Creating new Registry instance
Nov 14, 2003 9:55:07 PM org.apache.commons.modeler.Registry getServer
INFO: Creating MBeanServer
Nov 14, 2003 9:55:08 PM org.apache.coyote.http11.Http11Protocol init
SEVERE: Error initializing endpoint
java.net.SocketException: IPv4 mapped addresses usage is turned off.
Set net.inet6.ip6.v6only=0 or use '-Djava.net.preferIPv4Stack=true' to
disable java IPv6 support
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:331)
at java.net.ServerSocket.bind(ServerSocket.java:318)
at java.net.ServerSocket.init(ServerSocket.java:185)
at java.net.ServerSocket.init(ServerSocket.java:141)
at
org.apache.tomcat.util.net.DefaultServerSocketFactory.createSocket(Defa
u
ltServerSocketFactory.java:96)
at
org.apache.tomcat.util.net.PoolTcpEndpoint.initEndpoint(PoolTcpEndpoint
.
java:275)
at
org.apache.coyote.http11.Http11Protocol.init(Http11Protocol.java:150)
at
org.apache.coyote.tomcat4.CoyoteConnector.initialize(CoyoteConnector.ja
v
a:1156)
at
org.apache.catalina.core.StandardService.initialize(StandardService.jav
a
:579)
at
org.apache.catalina.core.StandardServer.initialize(StandardServer.java:
2
246)
at
org.apache.catalina.startup.Catalina.start(Catalina.java:511)
at
org.apache.catalina.startup.Catalina.execute(Catalina.java:400)
at
org.apache.catalina.startup.Catalina.process(Catalina.java:180)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.ja
v
a:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccesso
r
Impl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:203)
Catalina.start: LifecycleException:  Protocol handler initialization
failed: java.net.SocketException: IPv4 mapped addresses usage is turned
off.  Set net.inet6.ip6.v6only=0 or use
'-Djava.net.preferIPv4Stack=true' to disable java IPv6 support
LifecycleException:  Protocol handler initialization failed:
java.net.SocketException: IPv4 mapped addresses usage is turned off.
Set net.inet6.ip6.v6only=0 or use '-Djava.net.preferIPv4Stack=true' to
disable java IPv6 support
at
org.apache.coyote.tomcat4.CoyoteConnector.initialize(CoyoteConnector.ja
v
a:1158)
at
org.apache.catalina.core.StandardService.initialize(StandardService.jav
a
:579)
at
org.apache.catalina.core.StandardServer.initialize(StandardServer.java:
2
246)
at
org.apache.catalina.startup.Catalina.start(Catalina.java:511)
at
org.apache.catalina.startup.Catalina.execute(Catalina.java:400)
at
org.apache.catalina.startup.Catalina.process(Catalina.java:180)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.ja
v
a:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccesso
r

Unique error message when starting Tomcat 4.1.27

2003-11-14 Thread Dean Searle

 I cvsup'd on Nov 14 at 16:30 EDT.

Thanks in advance,

Dean

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Load balancing a standalone Tomcat 4.1

I have searched around to find this and have found nothing, but is it possible to load 
balance a complete standalone Tomcat server or cluster standalone Tomcat's doing HTTP 
and Application requests?

Thank you everyone in advance

Dean




-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: Load balancing a standalone Tomcat 4.1

I knew you could do that with apache and tomcat, but I'm looking at only Tomcat itself 
and nothing else.

-Original Message-
From:   Asif Chowdhary [mailto:[EMAIL PROTECTED]
Sent:   Tue 11/11/2003 14:37
To: Tomcat Users List
Cc: 
Subject:RE: Load balancing a standalone Tomcat 4.1
Yes you can cluster and load balance tomcat using mod-jk2 Connector

-Original Message-
From: Dean Searle [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 11, 2003 2:27 PM
To: Tomcat Users List
Subject: Load balancing a standalone Tomcat 4.1

I have searched around to find this and have found nothing, but is it possible to load 
balance a complete standalone Tomcat server or cluster standalone Tomcat's doing HTTP 
and Application requests?

Thank you everyone in advance

Dean

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: Load balancing a standalone Tomcat 4.1

Thank you very much, Yoav.

Reading through it looks like I would need the assistance  of Apache anyways, or can I 
have an instance of Tomcat listening on port 80 and do the load balancing?

Dean


-Original Message-
From:   Shapira, Yoav [mailto:[EMAIL PROTECTED]
Sent:   Tue 11/11/2003 14:44
To: Tomcat Users List
Cc: 
Subject:RE: Load balancing a standalone Tomcat 4.1

Howdy,
Yes, you can do with tomcat standalone.  See
http://www.filip.net/tomcat/tomcat-javagroups.html

Yoav Shapira
Millennium ChemInformatics


-Original Message-
From: Dean Searle [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 11, 2003 2:43 PM
To: Tomcat Users List
Subject: RE: Load balancing a standalone Tomcat 4.1

I knew you could do that with apache and tomcat, but I'm looking at
only
Tomcat itself and nothing else.


-Original Message-
From:  Asif Chowdhary [mailto:[EMAIL PROTECTED]
Sent:  Tue 11/11/2003 14:37
To:Tomcat Users List
Cc:
Subject:   RE: Load balancing a standalone Tomcat 4.1
Yes you can cluster and load balance tomcat using mod-jk2 Connector

-Original Message-
From: Dean Searle [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 11, 2003 2:27 PM
To: Tomcat Users List
Subject: Load balancing a standalone Tomcat 4.1


I have searched around to find this and have found nothing, but is it
possible to load balance a complete standalone Tomcat server or cluster
standalone Tomcat's doing HTTP and Application requests?

Thank you everyone in advance

Dean






-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]








This e-mail, including any attachments, is a confidential business communication, and 
may contain information that is confidential, proprietary and/or privileged.  This 
e-mail is intended only for the individual(s) to whom it is addressed, and may not be 
saved, copied, printed, disclosed or used by anyone else.  If you are not the(an) 
intended recipient, please immediately delete this e-mail from your computer system 
and notify the sender.  Thank you.


-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]





-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: Load balancing a standalone Tomcat 4.1