RE: How to make tomcat work on a remote server?
This might be something to look at, but I know in Fedora Core 3, the last SE Linux Policy broke mod_jk. You had to either turn of SELinux or modify targeted policy. If you think you may have this problem, look at /var/log/messages to see if the security policy is logging any errors. You can also run: audit2allow -d to see if any policy changes needed to be added. Randall -Original Message- From: Raghupathy,Gurumoorthy [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 21, 2005 7:10 AM To: 'Tomcat Users List' Subject: RE: How to make tomcat work on a remote server? Hey just got it Look at : http://www.junlu.com/msg/170819.html -Original Message- From: Raghupathy,Gurumoorthy [mailto:[EMAIL PROTECTED] Sent: 21 June 2005 14:04 To: 'Tomcat Users List' Cc: '[EMAIL PROTECTED]' Subject: RE: How to make tomcat work on a remote server? From my experience Your DocumentRoot should be different to the appBase of your virtual host ... Set the document root to something else and try Regards Guru -Original Message- From: Raghupathy,Gurumoorthy [mailto:[EMAIL PROTECTED] Sent: 21 June 2005 13:45 To: 'Tomcat Users List' Cc: '[EMAIL PROTECTED]' Subject: RE: How to make tomcat work on a remote server? Sorry could not get back to you earlier ... I think you are worker2.properties ... Remove LoadModule jk2_module modules/mod_jk2.so Include /usr/local/tomcat/conf/auto/mod_jk2.conf Your workers. Should be somehting like this .. .. http://jakarta.apache.org/tomcat/connectors-doc/howto/workers.html I will look into your problem from home .. Have emailed my home address ... Regards Guru -Original Message- From: sai krishna [mailto:[EMAIL PROTECTED] Sent: 21 June 2005 13:06 To: Tomcat Users List Subject: RE: How to make tomcat work on a remote server? Can anyone help me out here?? Im unable to access my jsp page on the net. I get internal server error. Im using included both mod_jk and mod_jk2 module, /var/logs/httpd/log shows that mod_jk2 starts but down below this module I loaded mod_jk module so it will support JkMount command in httpd.conf file. Can any one suggest m e the best method to access jsp pages on tomcat 4.1.17 either mod_jk/mod_jk2 connector and 2.0.52 apache on Fedora box 2. Today I added JkMount line in httpd.conf and rest everything is same as my down files server.xml is as following Server port=8005 shutdown=SHUTDOWN debug=0 !-- Define an Apache-Connector Service -- Service name=Tomcat-Apache !-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -- Connector className=org.apache.coyote.tomcat4.CoyoteConnector port=8009 minProcessors=5 maxProcessors=75 enableLookups=true redirectPort=8443 acceptCount=10 debug=0 connectionTimeout=2 useURIValidationHack=false protocolHandlerClassName=org.apache.jk.server.JkCoyoteHandler/ Engine name=Apache defaultHost=www.oursitename.com debug=0 Logger className=org.apache.catalina.logger.FileLogger prefix=apache_log. suffix=.txt timestamp=true/ !-- Access log processes all requests for this virtual host. -- Valve className=org.apache.catalina.valves.AccessLogValve directory=logs prefix=localhost_access_log. suffix=.txt pattern=common resolveHosts=false/ Host name=www.oursitename.com debug=0 appBase=/home/httpd/vhosts/oursitename.com/httpdocs/ unpackWARs=true autoDeploy=true Aliaslocalhost/Alias Aliaswww/Alias/Host AliasOur IP/Alias /Engine /Service /Server -- httpd.conf file LoadModule jk2_module modules/mod_jk2.so LoadModule jk_module modules/mod_jk.so Include /usr/local/tomcat/conf/auto/mod_jk2.conf Include /usr/local/tomcat/conf/auto/mod_jk.conf VirtualHost Our IP:80 ServerName oursite.com:80 ServerAlias www.oursite.com UseCanonicalName On DocumentRoot /home/httpd/vhosts/oursite.com/httpdocs CustomLog /home/httpd/vhosts/oursite.com/statistics/logs/access_log combined ErrorLog /home/httpd/vhosts/oursite.com/statistics/logs/error_log Alias /trainer /home/httpd/vhosts/oursite.com/httpdocs/trainer JkMount /trainer/*.jsp ajp13 JkMount /trainer/adminjsp/*.jsp ajp13 Directory /home/httpd/vhosts/oursite.com/httpdocs/trainer/ Options Indexes FollowSymLinks DirectoryIndex index.html index.htm index.jsp /Directory Location /trainer/WEB-INF/* AllowOverride None deny from all /Location Location /trainer/META-INF/* AllowOverride None deny from all /Location Directory /home/httpd/vhosts/oursite.com/httpdocs/ Options None AllowOverride None /Directory --- workers.properties [logger.apache2] level=DEBUG [shm] file=/home/httpd/vhosts/oursite.com/tomcatlog size=1048576 # Example socket channel, override port and host. [channel.socket:localhost:8009] port=8009 host=127.0.0.1 # define the worker [ajp13:localhost:8009] channel=channel.socket:localhost
RE: How to make tomcat work on a remote server?
Can anyone help me out here?? Im unable to access my jsp page on the net. I get internal server error. Im using included both mod_jk and mod_jk2 module, /var/logs/httpd/log shows that mod_jk2 starts but down below this module I loaded mod_jk module so it will support JkMount command in httpd.conf file. Can any one suggest m e the best method to access jsp pages on tomcat 4.1.17 either mod_jk/mod_jk2 connector and 2.0.52 apache on Fedora box 2. Today I added JkMount line in httpd.conf and rest everything is same as my down files server.xml is as following Server port=8005 shutdown=SHUTDOWN debug=0 !-- Define an Apache-Connector Service -- Service name=Tomcat-Apache !-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -- Connector className=org.apache.coyote.tomcat4.CoyoteConnector port=8009 minProcessors=5 maxProcessors=75 enableLookups=true redirectPort=8443 acceptCount=10 debug=0 connectionTimeout=2 useURIValidationHack=false protocolHandlerClassName=org.apache.jk.server.JkCoyoteHandler/ Engine name=Apache defaultHost=www.oursitename.com debug=0 Logger className=org.apache.catalina.logger.FileLogger prefix=apache_log. suffix=.txt timestamp=true/ !-- Access log processes all requests for this virtual host. -- Valve className=org.apache.catalina.valves.AccessLogValve directory=logs prefix=localhost_access_log. suffix=.txt pattern=common resolveHosts=false/ Host name=www.oursitename.com debug=0 appBase=/home/httpd/vhosts/oursitename.com/httpdocs/ unpackWARs=true autoDeploy=true Aliaslocalhost/Alias Aliaswww/Alias/Host AliasOur IP/Alias /Engine /Service /Server -- httpd.conf file LoadModule jk2_module modules/mod_jk2.so LoadModule jk_module modules/mod_jk.so Include /usr/local/tomcat/conf/auto/mod_jk2.conf Include /usr/local/tomcat/conf/auto/mod_jk.conf VirtualHost Our IP:80 ServerName oursite.com:80 ServerAlias www.oursite.com UseCanonicalName On DocumentRoot /home/httpd/vhosts/oursite.com/httpdocs CustomLog /home/httpd/vhosts/oursite.com/statistics/logs/access_log combined ErrorLog /home/httpd/vhosts/oursite.com/statistics/logs/error_log Alias /trainer /home/httpd/vhosts/oursite.com/httpdocs/trainer JkMount /trainer/*.jsp ajp13 JkMount /trainer/adminjsp/*.jsp ajp13 Directory /home/httpd/vhosts/oursite.com/httpdocs/trainer/ Options Indexes FollowSymLinks DirectoryIndex index.html index.htm index.jsp /Directory Location /trainer/WEB-INF/* AllowOverride None deny from all /Location Location /trainer/META-INF/* AllowOverride None deny from all /Location Directory /home/httpd/vhosts/oursite.com/httpdocs/ Options None AllowOverride None /Directory --- workers.properties [logger.apache2] level=DEBUG [shm] file=/home/httpd/vhosts/oursite.com/tomcatlog size=1048576 # Example socket channel, override port and host. [channel.socket:localhost:8009] port=8009 host=127.0.0.1 # define the worker [ajp13:localhost:8009] channel=channel.socket:localhost:8009 # Uri mapping [uri:ourIP/*.jsp] worker=ajp13:localhost:8009 [uri:www.oursite.com/*.jsp] worker=ajp13:localhost:8009 -- __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: How to make tomcat work on a remote server?
Sorry could not get back to you earlier ... I think you are worker2.properties ... Remove LoadModule jk2_module modules/mod_jk2.so Include /usr/local/tomcat/conf/auto/mod_jk2.conf Your workers. Should be somehting like this .. .. http://jakarta.apache.org/tomcat/connectors-doc/howto/workers.html I will look into your problem from home .. Have emailed my home address ... Regards Guru -Original Message- From: sai krishna [mailto:[EMAIL PROTECTED] Sent: 21 June 2005 13:06 To: Tomcat Users List Subject: RE: How to make tomcat work on a remote server? Can anyone help me out here?? Im unable to access my jsp page on the net. I get internal server error. Im using included both mod_jk and mod_jk2 module, /var/logs/httpd/log shows that mod_jk2 starts but down below this module I loaded mod_jk module so it will support JkMount command in httpd.conf file. Can any one suggest m e the best method to access jsp pages on tomcat 4.1.17 either mod_jk/mod_jk2 connector and 2.0.52 apache on Fedora box 2. Today I added JkMount line in httpd.conf and rest everything is same as my down files server.xml is as following Server port=8005 shutdown=SHUTDOWN debug=0 !-- Define an Apache-Connector Service -- Service name=Tomcat-Apache !-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -- Connector className=org.apache.coyote.tomcat4.CoyoteConnector port=8009 minProcessors=5 maxProcessors=75 enableLookups=true redirectPort=8443 acceptCount=10 debug=0 connectionTimeout=2 useURIValidationHack=false protocolHandlerClassName=org.apache.jk.server.JkCoyoteHandler/ Engine name=Apache defaultHost=www.oursitename.com debug=0 Logger className=org.apache.catalina.logger.FileLogger prefix=apache_log. suffix=.txt timestamp=true/ !-- Access log processes all requests for this virtual host. -- Valve className=org.apache.catalina.valves.AccessLogValve directory=logs prefix=localhost_access_log. suffix=.txt pattern=common resolveHosts=false/ Host name=www.oursitename.com debug=0 appBase=/home/httpd/vhosts/oursitename.com/httpdocs/ unpackWARs=true autoDeploy=true Aliaslocalhost/Alias Aliaswww/Alias/Host AliasOur IP/Alias /Engine /Service /Server -- httpd.conf file LoadModule jk2_module modules/mod_jk2.so LoadModule jk_module modules/mod_jk.so Include /usr/local/tomcat/conf/auto/mod_jk2.conf Include /usr/local/tomcat/conf/auto/mod_jk.conf VirtualHost Our IP:80 ServerName oursite.com:80 ServerAlias www.oursite.com UseCanonicalName On DocumentRoot /home/httpd/vhosts/oursite.com/httpdocs CustomLog /home/httpd/vhosts/oursite.com/statistics/logs/access_log combined ErrorLog /home/httpd/vhosts/oursite.com/statistics/logs/error_log Alias /trainer /home/httpd/vhosts/oursite.com/httpdocs/trainer JkMount /trainer/*.jsp ajp13 JkMount /trainer/adminjsp/*.jsp ajp13 Directory /home/httpd/vhosts/oursite.com/httpdocs/trainer/ Options Indexes FollowSymLinks DirectoryIndex index.html index.htm index.jsp /Directory Location /trainer/WEB-INF/* AllowOverride None deny from all /Location Location /trainer/META-INF/* AllowOverride None deny from all /Location Directory /home/httpd/vhosts/oursite.com/httpdocs/ Options None AllowOverride None /Directory --- workers.properties [logger.apache2] level=DEBUG [shm] file=/home/httpd/vhosts/oursite.com/tomcatlog size=1048576 # Example socket channel, override port and host. [channel.socket:localhost:8009] port=8009 host=127.0.0.1 # define the worker [ajp13:localhost:8009] channel=channel.socket:localhost:8009 # Uri mapping [uri:ourIP/*.jsp] worker=ajp13:localhost:8009 [uri:www.oursite.com/*.jsp] worker=ajp13:localhost:8009 -- __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: How to make tomcat work on a remote server?
From my experience Your DocumentRoot should be different to the appBase of your virtual host ... Set the document root to something else and try Regards Guru -Original Message- From: Raghupathy,Gurumoorthy [mailto:[EMAIL PROTECTED] Sent: 21 June 2005 13:45 To: 'Tomcat Users List' Cc: '[EMAIL PROTECTED]' Subject: RE: How to make tomcat work on a remote server? Sorry could not get back to you earlier ... I think you are worker2.properties ... Remove LoadModule jk2_module modules/mod_jk2.so Include /usr/local/tomcat/conf/auto/mod_jk2.conf Your workers. Should be somehting like this .. .. http://jakarta.apache.org/tomcat/connectors-doc/howto/workers.html I will look into your problem from home .. Have emailed my home address ... Regards Guru -Original Message- From: sai krishna [mailto:[EMAIL PROTECTED] Sent: 21 June 2005 13:06 To: Tomcat Users List Subject: RE: How to make tomcat work on a remote server? Can anyone help me out here?? Im unable to access my jsp page on the net. I get internal server error. Im using included both mod_jk and mod_jk2 module, /var/logs/httpd/log shows that mod_jk2 starts but down below this module I loaded mod_jk module so it will support JkMount command in httpd.conf file. Can any one suggest m e the best method to access jsp pages on tomcat 4.1.17 either mod_jk/mod_jk2 connector and 2.0.52 apache on Fedora box 2. Today I added JkMount line in httpd.conf and rest everything is same as my down files server.xml is as following Server port=8005 shutdown=SHUTDOWN debug=0 !-- Define an Apache-Connector Service -- Service name=Tomcat-Apache !-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -- Connector className=org.apache.coyote.tomcat4.CoyoteConnector port=8009 minProcessors=5 maxProcessors=75 enableLookups=true redirectPort=8443 acceptCount=10 debug=0 connectionTimeout=2 useURIValidationHack=false protocolHandlerClassName=org.apache.jk.server.JkCoyoteHandler/ Engine name=Apache defaultHost=www.oursitename.com debug=0 Logger className=org.apache.catalina.logger.FileLogger prefix=apache_log. suffix=.txt timestamp=true/ !-- Access log processes all requests for this virtual host. -- Valve className=org.apache.catalina.valves.AccessLogValve directory=logs prefix=localhost_access_log. suffix=.txt pattern=common resolveHosts=false/ Host name=www.oursitename.com debug=0 appBase=/home/httpd/vhosts/oursitename.com/httpdocs/ unpackWARs=true autoDeploy=true Aliaslocalhost/Alias Aliaswww/Alias/Host AliasOur IP/Alias /Engine /Service /Server -- httpd.conf file LoadModule jk2_module modules/mod_jk2.so LoadModule jk_module modules/mod_jk.so Include /usr/local/tomcat/conf/auto/mod_jk2.conf Include /usr/local/tomcat/conf/auto/mod_jk.conf VirtualHost Our IP:80 ServerName oursite.com:80 ServerAlias www.oursite.com UseCanonicalName On DocumentRoot /home/httpd/vhosts/oursite.com/httpdocs CustomLog /home/httpd/vhosts/oursite.com/statistics/logs/access_log combined ErrorLog /home/httpd/vhosts/oursite.com/statistics/logs/error_log Alias /trainer /home/httpd/vhosts/oursite.com/httpdocs/trainer JkMount /trainer/*.jsp ajp13 JkMount /trainer/adminjsp/*.jsp ajp13 Directory /home/httpd/vhosts/oursite.com/httpdocs/trainer/ Options Indexes FollowSymLinks DirectoryIndex index.html index.htm index.jsp /Directory Location /trainer/WEB-INF/* AllowOverride None deny from all /Location Location /trainer/META-INF/* AllowOverride None deny from all /Location Directory /home/httpd/vhosts/oursite.com/httpdocs/ Options None AllowOverride None /Directory --- workers.properties [logger.apache2] level=DEBUG [shm] file=/home/httpd/vhosts/oursite.com/tomcatlog size=1048576 # Example socket channel, override port and host. [channel.socket:localhost:8009] port=8009 host=127.0.0.1 # define the worker [ajp13:localhost:8009] channel=channel.socket:localhost:8009 # Uri mapping [uri:ourIP/*.jsp] worker=ajp13:localhost:8009 [uri:www.oursite.com/*.jsp] worker=ajp13:localhost:8009 -- __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: How to make tomcat work on a remote server?
Hey just got it Look at : http://www.junlu.com/msg/170819.html -Original Message- From: Raghupathy,Gurumoorthy [mailto:[EMAIL PROTECTED] Sent: 21 June 2005 14:04 To: 'Tomcat Users List' Cc: '[EMAIL PROTECTED]' Subject: RE: How to make tomcat work on a remote server? From my experience Your DocumentRoot should be different to the appBase of your virtual host ... Set the document root to something else and try Regards Guru -Original Message- From: Raghupathy,Gurumoorthy [mailto:[EMAIL PROTECTED] Sent: 21 June 2005 13:45 To: 'Tomcat Users List' Cc: '[EMAIL PROTECTED]' Subject: RE: How to make tomcat work on a remote server? Sorry could not get back to you earlier ... I think you are worker2.properties ... Remove LoadModule jk2_module modules/mod_jk2.so Include /usr/local/tomcat/conf/auto/mod_jk2.conf Your workers. Should be somehting like this .. .. http://jakarta.apache.org/tomcat/connectors-doc/howto/workers.html I will look into your problem from home .. Have emailed my home address ... Regards Guru -Original Message- From: sai krishna [mailto:[EMAIL PROTECTED] Sent: 21 June 2005 13:06 To: Tomcat Users List Subject: RE: How to make tomcat work on a remote server? Can anyone help me out here?? Im unable to access my jsp page on the net. I get internal server error. Im using included both mod_jk and mod_jk2 module, /var/logs/httpd/log shows that mod_jk2 starts but down below this module I loaded mod_jk module so it will support JkMount command in httpd.conf file. Can any one suggest m e the best method to access jsp pages on tomcat 4.1.17 either mod_jk/mod_jk2 connector and 2.0.52 apache on Fedora box 2. Today I added JkMount line in httpd.conf and rest everything is same as my down files server.xml is as following Server port=8005 shutdown=SHUTDOWN debug=0 !-- Define an Apache-Connector Service -- Service name=Tomcat-Apache !-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -- Connector className=org.apache.coyote.tomcat4.CoyoteConnector port=8009 minProcessors=5 maxProcessors=75 enableLookups=true redirectPort=8443 acceptCount=10 debug=0 connectionTimeout=2 useURIValidationHack=false protocolHandlerClassName=org.apache.jk.server.JkCoyoteHandler/ Engine name=Apache defaultHost=www.oursitename.com debug=0 Logger className=org.apache.catalina.logger.FileLogger prefix=apache_log. suffix=.txt timestamp=true/ !-- Access log processes all requests for this virtual host. -- Valve className=org.apache.catalina.valves.AccessLogValve directory=logs prefix=localhost_access_log. suffix=.txt pattern=common resolveHosts=false/ Host name=www.oursitename.com debug=0 appBase=/home/httpd/vhosts/oursitename.com/httpdocs/ unpackWARs=true autoDeploy=true Aliaslocalhost/Alias Aliaswww/Alias/Host AliasOur IP/Alias /Engine /Service /Server -- httpd.conf file LoadModule jk2_module modules/mod_jk2.so LoadModule jk_module modules/mod_jk.so Include /usr/local/tomcat/conf/auto/mod_jk2.conf Include /usr/local/tomcat/conf/auto/mod_jk.conf VirtualHost Our IP:80 ServerName oursite.com:80 ServerAlias www.oursite.com UseCanonicalName On DocumentRoot /home/httpd/vhosts/oursite.com/httpdocs CustomLog /home/httpd/vhosts/oursite.com/statistics/logs/access_log combined ErrorLog /home/httpd/vhosts/oursite.com/statistics/logs/error_log Alias /trainer /home/httpd/vhosts/oursite.com/httpdocs/trainer JkMount /trainer/*.jsp ajp13 JkMount /trainer/adminjsp/*.jsp ajp13 Directory /home/httpd/vhosts/oursite.com/httpdocs/trainer/ Options Indexes FollowSymLinks DirectoryIndex index.html index.htm index.jsp /Directory Location /trainer/WEB-INF/* AllowOverride None deny from all /Location Location /trainer/META-INF/* AllowOverride None deny from all /Location Directory /home/httpd/vhosts/oursite.com/httpdocs/ Options None AllowOverride None /Directory --- workers.properties [logger.apache2] level=DEBUG [shm] file=/home/httpd/vhosts/oursite.com/tomcatlog size=1048576 # Example socket channel, override port and host. [channel.socket:localhost:8009] port=8009 host=127.0.0.1 # define the worker [ajp13:localhost:8009] channel=channel.socket:localhost:8009 # Uri mapping [uri:ourIP/*.jsp] worker=ajp13:localhost:8009 [uri:www.oursite.com/*.jsp] worker=ajp13:localhost:8009 -- __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL
RE: How to make tomcat work on a remote server?
Thank You Mr. Gurumoorthy, Sorry I couldnt reply You back as it was already late night here I went away from my desk. Thank you for the urls, But couldnt get what us this below url for? Is it for testing whether my server is running tomcat or not? Hope Im right http://www.junlu.com/msg/170819.html Thank You once again. Ill get back to u as soon as it runs. Sai Krishna --- Raghupathy,Gurumoorthy [EMAIL PROTECTED] wrote: Hey just got it Look at : http://www.junlu.com/msg/170819.html -Original Message- From: Raghupathy,Gurumoorthy [mailto:[EMAIL PROTECTED] Sent: 21 June 2005 14:04 To: 'Tomcat Users List' Cc: '[EMAIL PROTECTED]' Subject: RE: How to make tomcat work on a remote server? From my experience Your DocumentRoot should be different to the appBase of your virtual host ... Set the document root to something else and try Regards Guru -Original Message- From: Raghupathy,Gurumoorthy [mailto:[EMAIL PROTECTED] Sent: 21 June 2005 13:45 To: 'Tomcat Users List' Cc: '[EMAIL PROTECTED]' Subject: RE: How to make tomcat work on a remote server? Sorry could not get back to you earlier ... I think you are worker2.properties ... Remove LoadModule jk2_module modules/mod_jk2.so Include /usr/local/tomcat/conf/auto/mod_jk2.conf Your workers. Should be somehting like this .. .. http://jakarta.apache.org/tomcat/connectors-doc/howto/workers.html I will look into your problem from home .. Have emailed my home address ... Regards Guru -Original Message- From: sai krishna [mailto:[EMAIL PROTECTED] Sent: 21 June 2005 13:06 To: Tomcat Users List Subject: RE: How to make tomcat work on a remote server? Can anyone help me out here?? Im unable to access my jsp page on the net. I get internal server error. Im using included both mod_jk and mod_jk2 module, /var/logs/httpd/log shows that mod_jk2 starts but down below this module I loaded mod_jk module so it will support JkMount command in httpd.conf file. Can any one suggest m e the best method to access jsp pages on tomcat 4.1.17 either mod_jk/mod_jk2 connector and 2.0.52 apache on Fedora box 2. Today I added JkMount line in httpd.conf and rest everything is same as my down files server.xml is as following Server port=8005 shutdown=SHUTDOWN debug=0 !-- Define an Apache-Connector Service -- Service name=Tomcat-Apache !-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -- Connector className=org.apache.coyote.tomcat4.CoyoteConnector port=8009 minProcessors=5 maxProcessors=75 enableLookups=true redirectPort=8443 acceptCount=10 debug=0 connectionTimeout=2 useURIValidationHack=false protocolHandlerClassName=org.apache.jk.server.JkCoyoteHandler/ Engine name=Apache defaultHost=www.oursitename.com debug=0 Logger className=org.apache.catalina.logger.FileLogger prefix=apache_log. suffix=.txt timestamp=true/ !-- Access log processes all requests for this virtual host. -- Valve className=org.apache.catalina.valves.AccessLogValve directory=logs prefix=localhost_access_log. suffix=.txt pattern=common resolveHosts=false/ Host name=www.oursitename.com debug=0 appBase=/home/httpd/vhosts/oursitename.com/httpdocs/ unpackWARs=true autoDeploy=true Aliaslocalhost/Alias Aliaswww/Alias/Host AliasOur IP/Alias /Engine /Service /Server -- httpd.conf file LoadModule jk2_module modules/mod_jk2.so LoadModule jk_module modules/mod_jk.so Include /usr/local/tomcat/conf/auto/mod_jk2.conf Include /usr/local/tomcat/conf/auto/mod_jk.conf VirtualHost Our IP:80 ServerName oursite.com:80 ServerAlias www.oursite.com UseCanonicalName On DocumentRoot /home/httpd/vhosts/oursite.com/httpdocs CustomLog /home/httpd/vhosts/oursite.com/statistics/logs/access_log combined ErrorLog /home/httpd/vhosts/oursite.com/statistics/logs/error_log Alias /trainer /home/httpd/vhosts/oursite.com/httpdocs/trainer JkMount /trainer/*.jsp ajp13 JkMount /trainer/adminjsp/*.jsp ajp13 Directory /home/httpd/vhosts/oursite.com/httpdocs/trainer/ Options Indexes FollowSymLinks DirectoryIndex index.html index.htm index.jsp /Directory Location /trainer/WEB-INF/* AllowOverride None deny from all /Location Location /trainer/META-INF/* AllowOverride None deny from all /Location Directory /home/httpd/vhosts/oursite.com/httpdocs/ Options None AllowOverride None /Directory --- workers.properties [logger.apache2] level=DEBUG [shm] file=/home/httpd/vhosts/oursite.com/tomcatlog size=1048576 # Example socket channel, override port and host. [channel.socket:localhost:8009] port=8009 host=127.0.0.1 # define the worker [ajp13:localhost:8009] channel=channel.socket:localhost
Re: How to make tomcat work on a remote server?
Hi Check hosts file for access. regards Vijay sai krishna said the following on 20/06/2005 12:24 PM: Hello, Im a newbie to tomcat. I was trying to install on a remote server. I could install it on the localhost perfectly I can see it when I connect through lynx localhost:8080 I can see default tomcat page. But when I was trying its IP from a remote place http://IP-Address:8080 Im unable to access it. Can some one tell me what could have gone wrong Details - OS:Fedora core 2 Im using httpd2.0.54 jk1.3-6 connector and in conf file I added this line Include /usr/local/tomcat/conf/auto/mod_jk.conf and how should be virtualhost entry , adding a remote user so that I can access it from my work place and workers.properties worker.list=ajp13 worker.ajp13.port=8009 worker.ajp13.host=localhost worker.ajp13.type=ajp13 anything more needed here. Jus let me know Thank You Sai Krishna __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: How to make tomcat work on a remote server?
On Monday 20 June 2005 10:00, Anand Vijay wrote: Hi Check hosts file for access. Or check for firewall that blocks traffic on port 8080 if hosts file is correct. regards Vijay sai krishna said the following on 20/06/2005 12:24 PM: Hello, Im a newbie to tomcat. I was trying to install on a remote server. I could install it on the localhost perfectly I can see it when I connect through lynx localhost:8080 I can see default tomcat page. But when I was trying its IP from a remote place http://IP-Address:8080 Im unable to access it. Can some one tell me what could have gone wrong Details - OS:Fedora core 2 Im using httpd2.0.54 jk1.3-6 connector and in conf file I added this line Include /usr/local/tomcat/conf/auto/mod_jk.conf and how should be virtualhost entry , adding a remote user so that I can access it from my work place and workers.properties worker.list=ajp13 worker.ajp13.port=8009 worker.ajp13.host=localhost worker.ajp13.type=ajp13 anything more needed here. Jus let me know Thank You Sai Krishna __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: How to make tomcat work on a remote server?
I think you I didnt make myself enough clear? I repeat here. Im able to access in localhost all the jsp files and able to run them.But when im aceesing it through internet, I should see the jsp examples running, but im unable to execute them. what should I do to run them, like what should be my server.xml configuration set to.How should I give permissions my other java coders to upload their files i.e how to go with workers.properties etc. Im running tomcat and apache and tryin to access the jsp pages through apache using mod_jk connector, but im unable to do that? what could be the fault? hope im clear enough this time Sai Krishna --- Aleksandar Valchev [EMAIL PROTECTED] wrote: On Monday 20 June 2005 10:00, Anand Vijay wrote: Hi Check hosts file for access. Or check for firewall that blocks traffic on port 8080 if hosts file is correct. regards Vijay sai krishna said the following on 20/06/2005 12:24 PM: Hello, Im a newbie to tomcat. I was trying to install on a remote server. I could install it on the localhost perfectly I can see it when I connect through lynx localhost:8080 I can see default tomcat page. But when I was trying its IP from a remote place http://IP-Address:8080 Im unable to access it. Can some one tell me what could have gone wrong Details - OS:Fedora core 2 Im using httpd2.0.54 jk1.3-6 connector and in conf file I added this line Include /usr/local/tomcat/conf/auto/mod_jk.conf and how should be virtualhost entry , adding a remote user so that I can access it from my work place and workers.properties worker.list=ajp13 worker.ajp13.port=8009 worker.ajp13.host=localhost worker.ajp13.type=ajp13 anything more needed here. Jus let me know Thank You Sai Krishna __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football http://football.fantasysports.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: How to make tomcat work on a remote server?
Well Points you need to tell us 1. Is apache on the same machine as tomcat ? what is the name of machine ( ip address ) of apache what is the name of machine ( ip address ) of tomcat 2. how are you accessing apache ( http://servername/ ) ??? Send me the httpd.conf and the server.xml and the worker.properties ... We will have a look and let you know Regards Guru -Original Message- From: sai krishna [mailto:[EMAIL PROTECTED] Sent: 20 June 2005 10:24 To: Tomcat Users List Subject: Re: How to make tomcat work on a remote server? I think you I didnt make myself enough clear? I repeat here. Im able to access in localhost all the jsp files and able to run them.But when im aceesing it through internet, I should see the jsp examples running, but im unable to execute them. what should I do to run them, like what should be my server.xml configuration set to.How should I give permissions my other java coders to upload their files i.e how to go with workers.properties etc. Im running tomcat and apache and tryin to access the jsp pages through apache using mod_jk connector, but im unable to do that? what could be the fault? hope im clear enough this time Sai Krishna --- Aleksandar Valchev [EMAIL PROTECTED] wrote: On Monday 20 June 2005 10:00, Anand Vijay wrote: Hi Check hosts file for access. Or check for firewall that blocks traffic on port 8080 if hosts file is correct. regards Vijay sai krishna said the following on 20/06/2005 12:24 PM: Hello, Im a newbie to tomcat. I was trying to install on a remote server. I could install it on the localhost perfectly I can see it when I connect through lynx localhost:8080 I can see default tomcat page. But when I was trying its IP from a remote place http://IP-Address:8080 Im unable to access it. Can some one tell me what could have gone wrong Details - OS:Fedora core 2 Im using httpd2.0.54 jk1.3-6 connector and in conf file I added this line Include /usr/local/tomcat/conf/auto/mod_jk.conf and how should be virtualhost entry , adding a remote user so that I can access it from my work place and workers.properties worker.list=ajp13 worker.ajp13.port=8009 worker.ajp13.host=localhost worker.ajp13.type=ajp13 anything more needed here. Jus let me know Thank You Sai Krishna __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football http://football.fantasysports.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: How to make tomcat work on a remote server?
Yes tomcat and apache are running on the same server Im trying to access jsp pages through apache using mod_jk2 connector now. and `hostname` gives someother host existing on the same server, and apache IP is default configured to this hostname. Im trying to access jsp files by putting them in the same html directory i.e http://oursite.com/ should give index.html or index.jsp we are running tomcat and apache together on the same server simultaneously server.xml is as following Server port=8005 shutdown=SHUTDOWN debug=0 !-- Define an Apache-Connector Service -- Service name=Tomcat-Apache !-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -- Connector className=org.apache.coyote.tomcat4.CoyoteConnector port=8009 minProcessors=5 maxProcessors=75 enableLookups=true redirectPort=8443 acceptCount=10 debug=0 connectionTimeout=2 useURIValidationHack=false protocolHandlerClassName=org.apache.jk.server.JkCoyoteHandler/ Engine name=Apache defaultHost=www.oursitename.com debug=0 Logger className=org.apache.catalina.logger.FileLogger prefix=apache_log. suffix=.txt timestamp=true/ !-- Access log processes all requests for this virtual host. -- Valve className=org.apache.catalina.valves.AccessLogValve directory=logs prefix=localhost_access_log. suffix=.txt pattern=common resolveHosts=false/ Host name=www.oursitename.com debug=0 appBase=/home/httpd/vhosts/oursitename.com/httpdocs/ unpackWARs=true autoDeploy=true Aliaslocalhost/Alias Aliaswww/Alias/Host AliasOur IP/Alias /Engine /Service /Server -- httpd.conf file VirtualHost Our IP:80 ServerName oursite.com:80 ServerAlias www.oursite.com UseCanonicalName On DocumentRoot /home/httpd/vhosts/oursite.com/httpdocs CustomLog /home/httpd/vhosts/oursite.com/statistics/logs/access_log combined ErrorLog /home/httpd/vhosts/oursite.com/statistics/logs/error_log --- workers.properties [logger.apache2] level=DEBUG [shm] file=/home/httpd/vhosts/oursite.com/tomcatlog size=1048576 # Example socket channel, override port and host. [channel.socket:localhost:8009] port=8009 host=127.0.0.1 # define the worker [ajp13:localhost:8009] channel=channel.socket:localhost:8009 # Uri mapping [uri:ourIP/*.jsp] worker=ajp13:localhost:8009 [uri:www.oursite.com/*.jsp] worker=ajp13:localhost:8009 -- Thank You Sai Krishna --- Raghupathy,Gurumoorthy [EMAIL PROTECTED] wrote: Well Points you need to tell us 1. Is apache on the same machine as tomcat ? what is the name of machine ( ip address ) of apache what is the name of machine ( ip address ) of tomcat 2. how are you accessing apache ( http://servername/ ) ??? Send me the httpd.conf and the server.xml and the worker.properties ... We will have a look and let you know Regards Guru -Original Message- From: sai krishna [mailto:[EMAIL PROTECTED] Sent: 20 June 2005 10:24 To: Tomcat Users List Subject: Re: How to make tomcat work on a remote server? 12:24 PM: Hello, Im a newbie to tomcat. I was trying to install on a remote server. I could install it on the localhost perfectly I can see it when I connect through lynx localhost:8080 I can see default tomcat page. But when I was trying its IP from a remote place http://IP-Address:8080 Im unable to access it. Can some one tell me what could have gone wrong Details - OS:Fedora core 2 Im using httpd2.0.54 jk2.0 connector and in conf file I added this line Include /usr/local/tomcat/conf/auto/mod_jk.conf and how should be virtualhost entry , adding a remote user so that I can access it from my work place and workers.properties worker.list=ajp13 worker.ajp13.port=8009 worker.ajp13.host=localhost worker.ajp13.type=ajp13 anything more needed here. Jus let me know Thank You Sai Krishna __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football http://football.fantasysports.yahoo.com
RE: How to make tomcat work on a remote server?
Well I only know mod_jk ... Not mod_jk2 ... -Original Message- From: sai krishna [mailto:[EMAIL PROTECTED] Sent: 20 June 2005 12:11 To: Tomcat Users List Subject: RE: How to make tomcat work on a remote server? Yes tomcat and apache are running on the same server Im trying to access jsp pages through apache using mod_jk2 connector now. and `hostname` gives someother host existing on the same server, and apache IP is default configured to this hostname. Im trying to access jsp files by putting them in the same html directory i.e http://oursite.com/ should give index.html or index.jsp we are running tomcat and apache together on the same server simultaneously server.xml is as following Server port=8005 shutdown=SHUTDOWN debug=0 !-- Define an Apache-Connector Service -- Service name=Tomcat-Apache !-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -- Connector className=org.apache.coyote.tomcat4.CoyoteConnector port=8009 minProcessors=5 maxProcessors=75 enableLookups=true redirectPort=8443 acceptCount=10 debug=0 connectionTimeout=2 useURIValidationHack=false protocolHandlerClassName=org.apache.jk.server.JkCoyoteHandler/ Engine name=Apache defaultHost=www.oursitename.com debug=0 Logger className=org.apache.catalina.logger.FileLogger prefix=apache_log. suffix=.txt timestamp=true/ !-- Access log processes all requests for this virtual host. -- Valve className=org.apache.catalina.valves.AccessLogValve directory=logs prefix=localhost_access_log. suffix=.txt pattern=common resolveHosts=false/ Host name=www.oursitename.com debug=0 appBase=/home/httpd/vhosts/oursitename.com/httpdocs/ unpackWARs=true autoDeploy=true Aliaslocalhost/Alias Aliaswww/Alias/Host AliasOur IP/Alias /Engine /Service /Server -- httpd.conf file VirtualHost Our IP:80 ServerName oursite.com:80 ServerAlias www.oursite.com UseCanonicalName On DocumentRoot /home/httpd/vhosts/oursite.com/httpdocs CustomLog /home/httpd/vhosts/oursite.com/statistics/logs/access_log combined ErrorLog /home/httpd/vhosts/oursite.com/statistics/logs/error_log --- workers.properties [logger.apache2] level=DEBUG [shm] file=/home/httpd/vhosts/oursite.com/tomcatlog size=1048576 # Example socket channel, override port and host. [channel.socket:localhost:8009] port=8009 host=127.0.0.1 # define the worker [ajp13:localhost:8009] channel=channel.socket:localhost:8009 # Uri mapping [uri:ourIP/*.jsp] worker=ajp13:localhost:8009 [uri:www.oursite.com/*.jsp] worker=ajp13:localhost:8009 -- Thank You Sai Krishna --- Raghupathy,Gurumoorthy [EMAIL PROTECTED] wrote: Well Points you need to tell us 1. Is apache on the same machine as tomcat ? what is the name of machine ( ip address ) of apache what is the name of machine ( ip address ) of tomcat 2. how are you accessing apache ( http://servername/ ) ??? Send me the httpd.conf and the server.xml and the worker.properties ... We will have a look and let you know Regards Guru -Original Message- From: sai krishna [mailto:[EMAIL PROTECTED] Sent: 20 June 2005 10:24 To: Tomcat Users List Subject: Re: How to make tomcat work on a remote server? 12:24 PM: Hello, Im a newbie to tomcat. I was trying to install on a remote server. I could install it on the localhost perfectly I can see it when I connect through lynx localhost:8080 I can see default tomcat page. But when I was trying its IP from a remote place http://IP-Address:8080 Im unable to access it. Can some one tell me what could have gone wrong Details - OS:Fedora core 2 Im using httpd2.0.54 jk2.0 connector and in conf file I added this line Include /usr/local/tomcat/conf/auto/mod_jk.conf and how should be virtualhost entry , adding a remote user so that I can access it from my work place and workers.properties worker.list=ajp13 worker.ajp13.port=8009 worker.ajp13.host=localhost worker.ajp13.type=ajp13 anything more needed here. Jus let me know Thank You Sai Krishna __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail
RE: How to make tomcat work on a remote server?
Ok, explain for mod_jk, I can configure it and have it here. mod_jk2 is not a requirement here. Iwas trying to run tomcat with apache --- Raghupathy,Gurumoorthy [EMAIL PROTECTED] wrote: Well I only know mod_jk ... Not mod_jk2 ... -Original Message- From: sai krishna [mailto:[EMAIL PROTECTED] Sent: 20 June 2005 12:11 To: Tomcat Users List Subject: RE: How to make tomcat work on a remote server? Yes tomcat and apache are running on the same server Im trying to access jsp pages through apache using mod_jk2 connector now. and `hostname` gives someother host existing on the same server, and apache IP is default configured to this hostname. Im trying to access jsp files by putting them in the same html directory i.e http://oursite.com/ should give index.html or index.jsp we are running tomcat and apache together on the same server simultaneously server.xml is as following Server port=8005 shutdown=SHUTDOWN debug=0 !-- Define an Apache-Connector Service -- Service name=Tomcat-Apache !-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -- Connector className=org.apache.coyote.tomcat4.CoyoteConnector port=8009 minProcessors=5 maxProcessors=75 enableLookups=true redirectPort=8443 acceptCount=10 debug=0 connectionTimeout=2 useURIValidationHack=false protocolHandlerClassName=org.apache.jk.server.JkCoyoteHandler/ Engine name=Apache defaultHost=www.oursitename.com debug=0 Logger className=org.apache.catalina.logger.FileLogger prefix=apache_log. suffix=.txt timestamp=true/ !-- Access log processes all requests for this virtual host. -- Valve className=org.apache.catalina.valves.AccessLogValve directory=logs prefix=localhost_access_log. suffix=.txt pattern=common resolveHosts=false/ Host name=www.oursitename.com debug=0 appBase=/home/httpd/vhosts/oursitename.com/httpdocs/ unpackWARs=true autoDeploy=true Aliaslocalhost/Alias Aliaswww/Alias/Host AliasOur IP/Alias /Engine /Service /Server -- httpd.conf file VirtualHost Our IP:80 ServerName oursite.com:80 ServerAlias www.oursite.com UseCanonicalName On DocumentRoot /home/httpd/vhosts/oursite.com/httpdocs CustomLog /home/httpd/vhosts/oursite.com/statistics/logs/access_log combined ErrorLog /home/httpd/vhosts/oursite.com/statistics/logs/error_log --- workers.properties [logger.apache2] level=DEBUG [shm] file=/home/httpd/vhosts/oursite.com/tomcatlog size=1048576 # Example socket channel, override port and host. [channel.socket:localhost:8009] port=8009 host=127.0.0.1 # define the worker [ajp13:localhost:8009] channel=channel.socket:localhost:8009 # Uri mapping [uri:ourIP/*.jsp] worker=ajp13:localhost:8009 [uri:www.oursite.com/*.jsp] worker=ajp13:localhost:8009 -- Thank You Sai Krishna --- Raghupathy,Gurumoorthy [EMAIL PROTECTED] wrote: Well Points you need to tell us 1. Is apache on the same machine as tomcat ? what is the name of machine ( ip address ) of apache what is the name of machine ( ip address ) of tomcat 2. how are you accessing apache ( http://servername/ ) ??? Send me the httpd.conf and the server.xml and the worker.properties ... We will have a look and let you know Regards Guru -Original Message- From: sai krishna [mailto:[EMAIL PROTECTED] Sent: 20 June 2005 10:24 To: Tomcat Users List Subject: Re: How to make tomcat work on a remote server? 12:24 PM: Hello, Im a newbie to tomcat. I was trying to install on a remote server. I could install it on the localhost perfectly I can see it when I connect through lynx localhost:8080 I can see default tomcat page. But when I was trying its IP from a remote place http://IP-Address:8080 Im unable to access it. Can some one tell me what could have gone wrong Details - OS:Fedora core 2 Im using httpd2.0.54 jk2.0 connector and in conf file I added this line Include /usr/local/tomcat/conf/auto/mod_jk.conf and how should be virtualhost entry , adding a remote user so that I can access it from my work place and workers.properties worker.list=ajp13 worker.ajp13.port=8009 worker.ajp13.host=localhost worker.ajp13.type=ajp13 anything more needed here. Jus let me know Thank You Sai Krishna __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com === message truncated === __ Discover Yahoo! Stay in touch with email, IM, photo
RE: How to make tomcat work on a remote server?
Send me your httpd.conf / worker.properties / server.xml Regardds Guru -Original Message- From: sai krishna [mailto:[EMAIL PROTECTED] Sent: 20 June 2005 12:30 To: Tomcat Users List Subject: RE: How to make tomcat work on a remote server? Ok, explain for mod_jk, I can configure it and have it here. mod_jk2 is not a requirement here. Iwas trying to run tomcat with apache --- Raghupathy,Gurumoorthy [EMAIL PROTECTED] wrote: Well I only know mod_jk ... Not mod_jk2 ... -Original Message- From: sai krishna [mailto:[EMAIL PROTECTED] Sent: 20 June 2005 12:11 To: Tomcat Users List Subject: RE: How to make tomcat work on a remote server? Yes tomcat and apache are running on the same server Im trying to access jsp pages through apache using mod_jk2 connector now. and `hostname` gives someother host existing on the same server, and apache IP is default configured to this hostname. Im trying to access jsp files by putting them in the same html directory i.e http://oursite.com/ should give index.html or index.jsp we are running tomcat and apache together on the same server simultaneously server.xml is as following Server port=8005 shutdown=SHUTDOWN debug=0 !-- Define an Apache-Connector Service -- Service name=Tomcat-Apache !-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -- Connector className=org.apache.coyote.tomcat4.CoyoteConnector port=8009 minProcessors=5 maxProcessors=75 enableLookups=true redirectPort=8443 acceptCount=10 debug=0 connectionTimeout=2 useURIValidationHack=false protocolHandlerClassName=org.apache.jk.server.JkCoyoteHandler/ Engine name=Apache defaultHost=www.oursitename.com debug=0 Logger className=org.apache.catalina.logger.FileLogger prefix=apache_log. suffix=.txt timestamp=true/ !-- Access log processes all requests for this virtual host. -- Valve className=org.apache.catalina.valves.AccessLogValve directory=logs prefix=localhost_access_log. suffix=.txt pattern=common resolveHosts=false/ Host name=www.oursitename.com debug=0 appBase=/home/httpd/vhosts/oursitename.com/httpdocs/ unpackWARs=true autoDeploy=true Aliaslocalhost/Alias Aliaswww/Alias/Host AliasOur IP/Alias /Engine /Service /Server -- httpd.conf file VirtualHost Our IP:80 ServerName oursite.com:80 ServerAlias www.oursite.com UseCanonicalName On DocumentRoot /home/httpd/vhosts/oursite.com/httpdocs CustomLog /home/httpd/vhosts/oursite.com/statistics/logs/access_log combined ErrorLog /home/httpd/vhosts/oursite.com/statistics/logs/error_log --- workers.properties [logger.apache2] level=DEBUG [shm] file=/home/httpd/vhosts/oursite.com/tomcatlog size=1048576 # Example socket channel, override port and host. [channel.socket:localhost:8009] port=8009 host=127.0.0.1 # define the worker [ajp13:localhost:8009] channel=channel.socket:localhost:8009 # Uri mapping [uri:ourIP/*.jsp] worker=ajp13:localhost:8009 [uri:www.oursite.com/*.jsp] worker=ajp13:localhost:8009 -- Thank You Sai Krishna --- Raghupathy,Gurumoorthy [EMAIL PROTECTED] wrote: Well Points you need to tell us 1. Is apache on the same machine as tomcat ? what is the name of machine ( ip address ) of apache what is the name of machine ( ip address ) of tomcat 2. how are you accessing apache ( http://servername/ ) ??? Send me the httpd.conf and the server.xml and the worker.properties ... We will have a look and let you know Regards Guru -Original Message- From: sai krishna [mailto:[EMAIL PROTECTED] Sent: 20 June 2005 10:24 To: Tomcat Users List Subject: Re: How to make tomcat work on a remote server? 12:24 PM: Hello, Im a newbie to tomcat. I was trying to install on a remote server. I could install it on the localhost perfectly I can see it when I connect through lynx localhost:8080 I can see default tomcat page. But when I was trying its IP from a remote place http://IP-Address:8080 Im unable to access it. Can some one tell me what could have gone wrong Details - OS:Fedora core 2 Im using httpd2.0.54 jk2.0 connector and in conf file I added this line Include /usr/local/tomcat/conf/auto/mod_jk.conf and how should be virtualhost entry , adding a remote user so that I can access it from my work place and workers.properties worker.list=ajp13 worker.ajp13.port=8009 worker.ajp13.host=localhost worker.ajp13.type=ajp13 anything more needed here. Jus let me know Thank You Sai Krishna __ Do
RE: How to make tomcat work on a remote server?
I gave them already. Here they are again server.xml is as following Server port=8005 shutdown=SHUTDOWN debug=0 !-- Define an Apache-Connector Service -- Service name=Tomcat-Apache !-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -- Connector className=org.apache.coyote.tomcat4.CoyoteConnector port=8009 minProcessors=5 maxProcessors=75 enableLookups=true redirectPort=8443 acceptCount=10 debug=0 connectionTimeout=2 useURIValidationHack=false protocolHandlerClassName=org.apache.jk.server.JkCoyoteHandler/ Engine name=Apache defaultHost=www.oursitename.com debug=0 Logger className=org.apache.catalina.logger.FileLogger prefix=apache_log. suffix=.txt timestamp=true/ !-- Access log processes all requests for this virtual host. -- Valve className=org.apache.catalina.valves.AccessLogValve directory=logs prefix=localhost_access_log. suffix=.txt pattern=common resolveHosts=false/ Host name=www.oursitename.com debug=0 appBase=/home/httpd/vhosts/oursitename.com/httpdocs/ unpackWARs=true autoDeploy=true Aliaslocalhost/Alias Aliaswww/Alias/Host AliasOur IP/Alias /Engine /Service /Server -- httpd.conf file VirtualHost Our IP:80 ServerName oursite.com:80 ServerAlias www.oursite.com UseCanonicalName On DocumentRoot /home/httpd/vhosts/oursite.com/httpdocs CustomLog /home/httpd/vhosts/oursite.com/statistics/logs/access_log combined ErrorLog /home/httpd/vhosts/oursite.com/statistics/logs/error_log --- workers.properties [logger.apache2] level=DEBUG [shm] file=/home/httpd/vhosts/oursite.com/tomcatlog size=1048576 # Example socket channel, override port and host. [channel.socket:localhost:8009] port=8009 host=127.0.0.1 # define the worker [ajp13:localhost:8009] channel=channel.socket:localhost:8009 # Uri mapping [uri:ourIP/*.jsp] worker=ajp13:localhost:8009 [uri:www.oursite.com/*.jsp] worker=ajp13:localhost:8009 -- --- Raghupathy,Gurumoorthy [EMAIL PROTECTED] wrote: Send me your httpd.conf / worker.properties / server.xml Regardds Guru __ Yahoo! Mail Stay connected, organized, and protected. Take the tour: http://tour.mail.yahoo.com/mailtour.html - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]